Kinetic energy kept vs kinetic energy lost

Elastic vs Inelastic Collision

The difference between elastic and inelastic collisions is what happens to kinetic energy: an elastic collision keeps the total kinetic energy the same, while an inelastic collision turns some of it into heat, sound or permanent deformation. Momentum is conserved in both. When the objects stick together and move as one, the collision is called perfectly inelastic, and the kinetic energy loss is as large as momentum allows.

Two smooth balls colliding on felt next to a squashed lump of clay stuck to a block, showing elastic and inelastic impacts
Hard balls bounce apart with nearly all their kinetic energy, while clay flattens and sticks, losing much of it.

At a Glance

In both collisions total momentum is conserved: m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'. In an elastic collision total kinetic energy is also conserved, so the objects bounce apart with no energy lost. In an inelastic collision some kinetic energy becomes heat, sound or deformation, and in a perfectly inelastic collision the objects stick together.

Elastic
Momentum and kinetic energy both conserved
Inelastic
Momentum conserved, some kinetic energy lost
Perfectly inelastic
Objects stick: v' = (m₁v₁ + m₂v₂) / (m₁ + m₂)
Coefficient of restitution
Elastic: e = 1 · Inelastic: 0 ≤ e < 1
Typical examples
Elastic: gas molecules · Inelastic: car crash
On this page
  1. What Is the Difference Between Elastic and Inelastic Collisions?
  2. How Are Elastic and Inelastic Collisions Defined?
  3. What Formulas Describe Each Type of Collision?
  4. Where Does the Kinetic Energy Go in an Inelastic Collision?
  5. What Is the Difference Between Inelastic and Perfectly Inelastic Collisions?
  6. What Are Examples of Elastic and Inelastic Collisions?
  7. Who First Studied Elastic and Inelastic Collisions?
  8. Common Misconceptions
  9. Key Facts
  10. Quiz
  11. FAQ

What Is the Difference Between Elastic and Inelastic Collisions?

Every collision obeys conservation of momentum, provided no outside force acts during the brief impact. What separates the two types is kinetic energy. In an elastic collision the total kinetic energy of the objects is the same before and after. In an inelastic collision part of it is converted into other forms, such as heat, sound, vibration or a permanent dent.

Drop a steel ball bearing onto a thick steel plate and it bounces almost back to its starting height: nearly elastic. Drop a lump of modeling clay and it flattens with a thud and stays put: strongly inelastic. Both collisions conserve momentum once you include the Earth, but only the first keeps the kinetic energy.

The energy does not vanish in an inelastic collision. It is still there, just not as the motion of the objects as a whole. The table below compares the two types point by point.

Elastic and inelastic collisions compared side by side
FeatureElastic collisionInelastic collision
Momentum conserved?YesYes
Total kinetic energy conserved?YesNo, some is converted
Where the lost KE goesNowhere, none is lostHeat, sound, vibration, deformation
Objects after impactBounce apartSeparate, or stick together if perfectly inelastic
Shape after impactReturns to originalMay stay dented or deformed
Coefficient of restitutione = 10 ≤ e < 1 (e = 0 if they stick)
Extra equation usedKE before = KE afterMeasured e, or a shared final velocity
Total energy conserved?YesYes, when all forms are counted
Where it occursAtoms, molecules, nearly with hard spheresAlmost all everyday collisions
Typical soundA sharp clickA dull thud or crunch
ExampleBilliard balls collidingTwo cars colliding
2 kg at 3 m/s hits 1 kg at restSpeeds after: 1 m/s and 4 m/s, KE stays 9 JIf they stick: both 2 m/s, KE drops to 6 J
Source: Definitions as used in standard SI mechanics; example values computed from momentum and kinetic energy conservation · Retrieved October 2026

How Are Elastic and Inelastic Collisions Defined?

An elastic collision leaves the combined kinetic energy of the colliding objects unchanged. The objects deform briefly during contact, storing energy like springs, then spring back and return all of it as motion. Truly perfect elastic collisions happen only between particles such as atoms and subatomic particles, but hard steel spheres and billiard balls come close.

An inelastic collision ends with less combined kinetic energy than it started with. Nearly every everyday collision falls in this group: a tennis racket hitting a ball, a hammer driving a nail, two cars meeting at a junction.

The coefficient of restitution, e, puts a number on the difference. It compares the speed at which the objects separate with the speed at which they approached. An elastic collision has e = 1, a perfectly inelastic one has e = 0, and real collisions fall in between.

What Formulas Describe Each Type of Collision?

For a head-on collision of two objects, momentum conservation is the starting point in both cases: m1v1+m2v2=m1v1′+m2v2′, where primes mark velocities after the impact. With two unknown final velocities you need one more equation, and that is where the collision type matters.

For an elastic collision the extra equation is kinetic energy conservation, 12m1v12+12m2v22=12m1v1′2+12m2v2′2. Solving the two together gives a closed formula for each final velocity, used in the first worked example below.

For a perfectly inelastic collision the extra condition is simply that both objects share one final velocity, v′=(m1v1+m2v2)/(m1+m2). For collisions in between, you need the measured coefficient of restitution. Our collision calculator handles all three cases with the steps shown.

This momentum equation holds for every collision, elastic or inelastic, as long as no outside force acts during the impact.

m1v1+m2v2=m1v1′+m2v2′
What each symbol means
SymbolQuantitySI unit
m1mass of object 1kilogram (kg)
v1initial velocity of object 1meter per second (m/s)
m2mass of object 2kilogram (kg)
v2initial velocity of object 2meter per second (m/s)
v1′final velocity of object 1meter per second (m/s)
v2′final velocity of object 2meter per second (m/s)

Rearranged to find another variable:

v2′=m1v1+m2v2−m1v1′m2v1′=m1v1+m2v2−m2v2′m1

Valid for: isolated system (net external force = 0); velocities are signed in 1D.

Example 1 Elastic bounce between two carts

On a low-friction track, a 0.2 kg cart moving at 1.5 m/s hits a 0.6 kg cart at rest. Their magnetic bumpers make the collision elastic. What is the velocity of the 0.6 kg cart afterward?

  1. Given:
    • mass of object 1: m1=0.2 kg
    • mass of object 2: m2=0.6 kg
    • initial velocity of object 1: v1=1.5 m/s
    • initial velocity of object 2: v2=0 m/s
  2. Formula: v1′=m1−m2m1+m2v1+2m2m1+m2v2,v2′=2m1m1+m2v1+m2−m1m1+m2v2
  3. Substitute: m1=0.2 kg,m2=0.6 kg,v1=1.5 m/s,v2=0 m/s
  4. Answer: v2′=0.75 m/s (2.7 km/h, 1.678 mph)

The lighter cart bounces back at 0.75 m/s (computed). The total kinetic energy is 0.225 J both before and after, as an elastic collision requires.

Where Does the Kinetic Energy Go in an Inelastic Collision?

The missing kinetic energy turns into other forms inside the objects and their surroundings. Some heats the surfaces in contact, some leaves as the sound of the impact, some sets the objects vibrating and some goes into bending or crushing material that does not spring back.

The bar chart below follows a 2 kg cart moving at 3 m/s into a 1 kg cart at rest. Before impact there are 9 J of kinetic energy. If the bumpers are springy and the collision is elastic, all 9 J remain as kinetic energy afterward. If the carts stick together, only 6 J of kinetic energy remain and 3 J have become thermal energy and other forms (computed).

Car designers use this on purpose. Crumple zones are built to make a crash as inelastic as possible, so the car's structure absorbs the kinetic energy over a longer time instead of passing it to the people inside. Our page on car safety features shows how.

Energy bar chart: 9 J of kinetic energy before impact, 9 J after an elastic bounce, and 6 J kinetic plus 3 J thermal after the carts stick
Momentum is the same in both outcomes, but only the elastic bounce keeps all 9 J as kinetic energy.

What Is the Difference Between Inelastic and Perfectly Inelastic Collisions?

A perfectly inelastic collision is the extreme case of an inelastic one: the objects stick together and move off with a single shared velocity. A dart sticking in a dartboard, a train car coupling to another and a football player tackled and carried along by an opponent are all close examples.

In an ordinary inelastic collision the objects still separate, just with less kinetic energy than they started with. A dropped basketball that bounces to half its original height is inelastic but not perfectly so.

Sticking together gives the largest possible loss of kinetic energy that momentum conservation allows. It does not mean all kinetic energy disappears. Unless the total momentum was zero to begin with, the joined objects must still be moving, as the two worked examples below show.

Example 2 Two carts that stick together

A 2 kg cart moving at 3 m/s runs into a 1 kg cart at rest, and a strip of hook-and-loop tape makes them stick and move off together. What is their common velocity after the collision?

  1. Given:
    • mass of object 1: m1=2 kg
    • initial velocity of object 1: v1=3 m/s
    • mass of object 2: m2=1 kg
    • initial velocity of object 2: v2=0 m/s
  2. Formula: v′=m1v1+m2v2m1+m2
  3. Substitute: m1=2 kg,v1=3 m/s,m2=1 kg,v2=0 m/s
  4. Answer: v′=2 m/s (7.2 km/h, 4.474 mph)

Momentum is 6 kg·m/s before and after, but the carts now move more slowly together than the first cart did alone.

Example 3 How much kinetic energy was lost?

For the same two carts (2 kg at 3 m/s sticking to 1 kg at rest), how much kinetic energy is lost in the collision? Find the kinetic energy before, ½m₁v₁², minus the kinetic energy of the joined carts afterward, ½(m₁ + m₂)v'², where v' = m₁v₁ / (m₁ + m₂).

  1. Given:
    • m1: m1=2 kg
    • v1: v1=3 m/s
    • m2: m2=1 kg
  2. Formula: KE=12mv2
  3. Substitute: m1=2 kg,v1=3 m/s,m2=1 kg
  4. Answer: KE=3 J

One third of the starting 9 J of kinetic energy turns into heat, sound and squashing of the tape, while momentum is fully conserved.

What Are Examples of Elastic and Inelastic Collisions?

Collisions that are elastic or very nearly elastic:

  • Gas molecules bouncing off each other and off the walls of a container.
  • A cue ball striking another billiard ball head-on.
  • The steel balls of a desk pendulum toy clicking against each other.
  • A neutron bouncing off a nucleus in a reactor without being absorbed.

Collisions that are clearly inelastic:

  • A car crash, where metal bends and glass breaks.
  • A ball of dough slapped onto a counter.
  • A meteorite striking the ground and forming a crater.
  • A baseball caught in a glove.

A simple bounce test sorts many objects. The higher a ball rebounds compared with its drop height, the closer its collision with the floor is to elastic. Our question page on why a ball bounces explains what happens inside the ball.

Who First Studied Elastic and Inelastic Collisions?

Rules for colliding bodies were one of the hot problems of seventeenth-century science. In the late 1660s, Christiaan Huygens and members of London's Royal Society worked out correct rules for hard, bouncing bodies, and those results fed into the laws of motion that Isaac Newton published in 1687.

Newton himself described the partial bounce of real bodies in terms of how fast they separate compared with how fast they approach, the idea behind today's coefficient of restitution. You can test the momentum rules on a classroom track in our momentum conservation carts experiment, and practice with printable answer keys in our momentum and impulse worksheets.

Common Misconceptions

Myth: Momentum is lost in an inelastic collision.

Physics: Momentum is conserved in every collision when no outside force acts. Only the kinetic energy decreases in an inelastic collision.

Myth: Energy is destroyed in an inelastic collision.

Physics: The lost kinetic energy changes into heat, sound and deformation. The total energy, counting every form, stays the same.

Myth: In a perfectly inelastic collision the objects always stop.

Physics: They stick together and keep moving with the shared velocity set by momentum. They stop only if the total momentum was zero before the impact.

Myth: If objects bounce apart, the collision must be elastic.

Physics: Bouncing objects can still lose kinetic energy. A collision is elastic only if the total kinetic energy after equals the total before.

Key Facts

  • Momentum is conserved in both elastic and inelastic collisions when no outside force acts.
  • Kinetic energy is conserved only in elastic collisions.
  • In inelastic collisions the lost kinetic energy becomes heat, sound, vibration or permanent deformation.
  • A perfectly inelastic collision is one in which the objects stick together and share one final velocity.
  • Sticking together causes the largest kinetic energy loss that momentum conservation allows.
  • The coefficient of restitution is 1 for an elastic collision and 0 for a perfectly inelastic one.
  • Total energy is always conserved; only the kinetic part changes in an inelastic collision.
Did you know? When an elastic ball hits a much heavier object that is standing still, it bounces back with almost its original speed, while the heavy object barely moves. That is why a rubber ball rebounds so well from a wall: the whole Earth is the heavy partner.

Quick Quiz: How Well Do You Know Elastic vs Inelastic Collision?

6 questions. Tap an answer to check it.

  1. Which quantity is conserved in both elastic and inelastic collisions?

  2. Two lumps of clay hit each other and stick together. What type of collision is this?

  3. What is the coefficient of restitution for a perfectly elastic collision?

  4. A 4 kg cart at 2 m/s sticks to a 4 kg cart at rest. What is their speed afterward?

  5. Where does the lost kinetic energy go in an inelastic collision?

  6. Which collision is closest to elastic?

Frequently Asked Questions

What is the difference between elastic and inelastic collisions?

In an elastic collision both momentum and total kinetic energy are conserved, so the objects bounce apart with the same total kinetic energy they started with. In an inelastic collision momentum is still conserved, but some kinetic energy turns into heat, sound or deformation. Most real collisions are inelastic, while molecular collisions are effectively elastic.

What is the difference between inelastic and perfectly inelastic collisions?

Both lose kinetic energy, but in a perfectly inelastic collision the objects stick together afterward and move with one shared velocity. In an ordinary inelastic collision they separate. Sticking together gives the largest kinetic energy loss that momentum conservation permits, which is why the coefficient of restitution is zero in that case.

Is momentum conserved in an inelastic collision?

Yes. Momentum is conserved in every collision as long as no outside force, such as friction from the ground, acts noticeably during the impact. The impact forces between the two objects are equal and opposite, so whatever momentum one object gains, the other loses. Only the kinetic energy is lost in an inelastic collision.

How can you tell if a collision is elastic or inelastic?

Calculate the total kinetic energy before and after the collision. If the totals match, the collision is elastic; if the total after is smaller, it is inelastic. In practice, signs of an inelastic collision include a loud sound, heating, lasting dents or the objects sticking together. A ball that rebounds to nearly its drop height is close to elastic.

Are there any perfectly elastic collisions in real life?

On the everyday scale, no collision is perfectly elastic, because a little energy always goes into sound and heat. Collisions between gas molecules and between subatomic particles that do not change state are elastic, and hard steel balls or billiard balls come very close, losing only a small fraction of their kinetic energy.

Is a car crash elastic or inelastic?

A car crash is strongly inelastic. Much of the cars' kinetic energy goes into crushing metal, breaking glass, heat and noise. Modern cars are designed this way on purpose: crumple zones absorb kinetic energy and lengthen the time of the impact, which lowers the forces on the people inside.

Can kinetic energy increase in a collision?

Yes, in what physicists call a superelastic or explosive collision. If stored energy is released during the impact, for example from a compressed spring, a chemical reaction or a nuclear reaction, the objects can fly apart with more kinetic energy than they had before. Momentum is still conserved in these events.

Why do elastic collisions conserve kinetic energy?

During an elastic collision the objects deform briefly and store energy like compressed springs. Because the material is perfectly springy, it returns all of that stored energy as motion when the objects separate. No energy is left behind as heat, sound or lasting deformation, so the total kinetic energy after the collision equals the total before.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.