Sideways vs back and forth

Transverse vs Longitudinal Waves

The difference between transverse and longitudinal waves is the direction the medium moves: in a transverse wave the particles move at right angles to the direction the wave travels, while in a longitudinal wave they move back and forth along it. Transverse waves form crests and troughs. Longitudinal waves form compressions and rarefactions, the pattern sound uses to cross a room.

Long metal coil spring stretched across a wooden floor, one part bunched into a compression and another bent into a sideways hump
One spring can carry both kinds of wave: a sideways hump is transverse, a bunched-up region is longitudinal.

At a Glance

In a transverse wave, particles vibrate perpendicular to the direction of travel, forming crests and troughs; light and waves on a string are examples. In a longitudinal wave, particles vibrate parallel to the direction of travel, forming compressions and rarefactions; sound is the main example. Both obey the wave equation v = f λ.

Transverse wave
Particles move perpendicular to travel; crests and troughs
Longitudinal wave
Particles move parallel to travel; compressions and rarefactions
Shared formula
v = f λ (wave speed = frequency × wavelength)
Typical examples
Transverse: light, string · Longitudinal: sound
Polarization
Transverse: possible · Longitudinal: impossible
On this page
  1. What Is the Difference Between Transverse and Longitudinal Waves?
  2. How Are Transverse and Longitudinal Waves Defined?
  3. What Do Transverse and Longitudinal Waves Look Like?
  4. What Formula Do Both Types of Waves Use?
  5. Which Materials Can Carry Each Type of Wave?
  6. Is Sound a Transverse or Longitudinal Wave?
  7. Why Can Only Transverse Waves Be Polarized?
  8. What Are Examples of Transverse and Longitudinal Waves?
  9. Common Misconceptions
  10. Key Facts
  11. Quiz
  12. FAQ

What Is the Difference Between Transverse and Longitudinal Waves?

Every mechanical wave moves energy through a material without carrying the material along with it. What changes from one kind of wave to another is how the particles of the material wiggle as the wave passes. That is the whole basis for the two names.

In a transverse wave, each particle moves at right angles to the direction the wave travels. Flick one end of a rope tied to a post and a hump runs along it, while each bit of rope only goes up and down. In a longitudinal wave, each particle moves back and forth in the same line the wave travels. Push one end of a stretched spring toy and a bunched-up region slides along its length.

So the question to ask is simple: does the medium move across the path or along it? Across means transverse. Along means longitudinal. The table below lines up the other differences that follow from this one.

Transverse and longitudinal waves compared side by side
FeatureTransverse waveLongitudinal wave
Particle motionPerpendicular to the direction of travelParallel to the direction of travel
Pattern formedCrests and troughsCompressions and rarefactions
Wavelength measuredCrest to crestCompression to compression
AmplitudeLargest sideways displacementLargest displacement along the path
Pressure and density changesNot neededYes, pressure rises and falls
Mechanical mediaMainly solids and liquid surfacesSolids, liquids and gases
Travels through a vacuum?Yes, for electromagnetic wavesNo
Can be polarized?YesNo
Seismic versionS waves, slower, blocked by liquidP waves, faster, pass through liquid
Spring toy demoShake the end side to sidePush and pull the end along its length
Wave equationv = f λv = f λ
Main exampleLightSound
Source: Definitions as used in standard wave physics; relative seismic speeds are typical behavior · Retrieved October 2026

How Are Transverse and Longitudinal Waves Defined?

A transverse wave is a wave in which the displacement of the medium is perpendicular to the direction of propagation. Its high points are called crests and its low points troughs. The wavelength is the distance from one crest to the next, and the amplitude is how far a particle moves from its rest position.

A longitudinal wave is a wave in which the displacement of the medium is parallel to the direction of propagation. Regions where particles crowd together are compressions, and regions where they spread apart are rarefactions. The wavelength is the distance from one compression to the next.

Both are kinds of mechanical waves when they travel through matter. Light is the big exception to the matter rule: it is a transverse wave of electric and magnetic fields that needs no medium at all.

What Do Transverse and Longitudinal Waves Look Like?

A transverse wave looks like the familiar wavy line. The first diagram below shows one frozen moment of a wave with crests, troughs, the amplitude and the wavelength marked. If you watched a single point on the curve, you would see it bob up and down while the shape slides to the right.

A longitudinal wave looks quite different. The second diagram shows a row of particles with tight bunches and open gaps. Below them, a graph plots how far each particle has shifted and how the pressure varies. That graph is wavy, but the wave itself is not sideways at all; the curve is just a handy way to show the pattern.

This is a common source of confusion. When a textbook draws sound as a sine curve, the curve shows pressure or displacement, not the actual shape of the air.

Transverse wave diagram with crests, troughs, an amplitude of 0.3 m and a wavelength of 1.5 m measured crest to crest
A transverse wave: each point moves up and down while the crests and troughs travel to the right.
Longitudinal wave diagram: particles bunched into compressions and spread into rarefactions, with displacement and pressure graphs below
A longitudinal wave: particles shift back and forth along the path, forming compressions and rarefactions.

What Formula Do Both Types of Waves Use?

Both waves obey the same relationship between speed, frequency and wavelength: v=fλ. The frequency f is how many full cycles pass a point each second, and the wavelength λ is the length of one cycle. Their product is how far the pattern moves each second.

What differs is what sets the speed. For a transverse wave on a rope, the speed depends on the tension and the mass per meter. For a longitudinal wave in air, it depends on how springy and how dense the air is. The frequency vs wavelength page covers the inverse link between the two, and our wave speed calculator solves for any of the three.

Both kinds of wave follow the same wave equation, which links wave speed, frequency and wavelength.

v=fλ
What each symbol means
SymbolQuantitySI unit
vwave speedmeter per second (m/s)
ffrequencyhertz (Hz)
λwavelengthmeter (m)

Rearranged to find another variable:

f=vλλ=vf

Valid for: periodic waves.

Example 1 A transverse wave on a jump rope

A child shakes one end of a long jump rope up and down 2 times per second, so f = 2 Hz. The crests along the rope are 1.5 m apart. How fast do the crests travel along the rope?

  1. Given:
    • frequency: f=2 Hz
    • wavelength: λ=1.5 m
  2. Formula: v=fλ
  3. Substitute: v=(2 Hz)(1.5 m)
  4. Answer: v=3 m/s (10.8 km/h, 6.711 mph)

The rope itself only moves up and down; it is the pattern of crests that travels toward the far end.

Which Materials Can Carry Each Type of Wave?

Longitudinal waves can travel through solids, liquids and gases. All a material needs is to push back when squeezed, and every state of matter does that. This is why you can hear sound through air, underwater and through a wall.

Transverse mechanical waves are pickier. They need a material that resists being sheared, or bent sideways, and that is mainly true of solids. Air and water inside their bulk cannot carry a sideways shake, so they do not carry transverse mechanical waves. The surface of water is a special case, discussed below.

Earthquakes show this rule on a planetary scale. Their faster longitudinal P waves pass through the whole Earth, while the slower transverse S waves are blocked by the liquid outer core. Our page on seismic waves explains how this shadow revealed that the outer core is liquid.

Is Sound a Transverse or Longitudinal Wave?

In air and other fluids, sound is a longitudinal wave. A speaker cone pushes forward and squeezes the air in front of it into a compression, then pulls back and leaves a rarefaction. Those regions travel outward at about 343 m/s in room-temperature air. More detail is on our sound waves page.

Inside solids, sound can travel as both types at once, because solids resist both squeezing and shearing. A tap on a steel rail sends longitudinal and transverse vibrations along it at different speeds. In everyday speech, though, "sound wave" almost always means the longitudinal kind.

Example 2 The wavelength of a tuning fork's sound

A tuning fork vibrates at 440 Hz in room-temperature air, where sound travels at about 343 m/s. What is the distance from one compression to the next?

  1. Given:
    • wave speed: v=343 m/s
    • frequency: f=440 Hz
  2. Formula: λ=vf
  3. Substitute: λ=(343 m/s)(440 Hz)
  4. Answer: λ=0.7795 m

Each air molecule only shuffles a tiny distance back and forth, yet the compressions it helps form are spaced most of a meter apart.

Why Can Only Transverse Waves Be Polarized?

A transverse wave can vibrate in many sideways directions: up and down, left and right, or any angle in between. Polarization means limiting that vibration to one direction, the way a picket fence lets a rope wave through only if the rope shakes along the gaps.

A longitudinal wave has only one possible direction of vibration, along its path, so there is nothing to filter. Polarized sunglasses work because light is transverse. The fact that light can be polarized was one of the early clues that it is a transverse wave.

What Are Examples of Transverse and Longitudinal Waves?

Transverse waves:

  • Light, radio waves and all other electromagnetic waves.
  • Vibrations on a guitar or violin string.
  • A ripple sent along a rope or a stadium crowd wave.
  • Seismic S waves.

Longitudinal waves:

  • Sound in air and water.
  • Ultrasound used in medical scans.
  • Seismic P waves.
  • A pulse pushed along a stretched spring toy.

Ocean waves are a mix. Water near the surface moves in roughly circular paths, combining an up-and-down motion with a forward-and-back motion. Our list of transverse and longitudinal wave examples sorts many more, and the waves worksheets give printable practice.

Common Misconceptions

Myth: Sound is a wavy, up-and-down wave because diagrams draw it as a sine curve.

Physics: In air, sound is longitudinal. The sine curve in diagrams is a graph of pressure or displacement, not the shape of the wave.

Myth: A wave carries the medium along with it.

Physics: Both types carry energy, not material. Each particle only vibrates around its own rest position while the pattern moves on.

Myth: Ocean waves are purely transverse.

Physics: Surface water moves in rough circles, combining up-and-down and back-and-forth motion, so ocean waves are a mix of both types.

Myth: All waves need a medium to travel.

Physics: Mechanical waves do, but electromagnetic waves such as light are transverse waves of fields that cross empty space.

Key Facts

  • In a transverse wave, particles vibrate at right angles to the direction the wave travels.
  • In a longitudinal wave, particles vibrate back and forth along the direction the wave travels.
  • Transverse waves form crests and troughs, while longitudinal waves form compressions and rarefactions.
  • Light is a transverse wave and sound in air is a longitudinal wave.
  • Only transverse waves can be polarized.
  • Longitudinal waves travel through solids, liquids and gases, but transverse mechanical waves mostly need a solid.
  • Both types follow the wave equation v = f λ.
Did you know? Seismologists locate distant earthquakes by timing the gap between the arrival of P waves and S waves; the longer the delay between the two, the farther away the earthquake happened.

Quick Quiz: How Well Do You Know Transverse vs Longitudinal Waves?

6 questions. Tap an answer to check it.

  1. In a longitudinal wave, the particles of the medium move…

  2. Which of these is a transverse wave?

  3. What are the regions of high pressure in a sound wave called?

  4. Which property can only transverse waves have?

  5. Why can't seismic S waves pass through Earth's outer core?

  6. A sound wave has a frequency of 343 Hz in air where its speed is 343 m/s. What is its wavelength?

Frequently Asked Questions

What is the main difference between transverse and longitudinal waves?

The main difference is the direction of vibration. In a transverse wave, the particles of the medium move at right angles to the direction the wave travels. In a longitudinal wave, they move back and forth in the same direction the wave travels. This is why transverse waves show crests and troughs, while longitudinal waves show compressions and rarefactions.

Is light a transverse or longitudinal wave?

Light is a transverse wave. It is made of electric and magnetic fields that oscillate at right angles to each other and to the direction the light travels. Because it is transverse, light can be polarized, which is how polarized sunglasses cut glare. Unlike mechanical waves, light needs no medium and crosses the vacuum of space.

Is sound a longitudinal wave?

Yes, sound in air, water and other fluids is a longitudinal wave. A vibrating source pushes on nearby molecules, creating compressions and rarefactions that travel outward. In solids, vibrations can also travel as transverse waves, but the sound we hear through the air always arrives as a longitudinal wave.

Can transverse waves travel through liquids?

Not through the bulk of a liquid. A transverse mechanical wave needs a material that resists being sheared sideways, and liquids simply flow instead. That is why earthquake S waves cannot pass through Earth's liquid outer core. Waves on the surface of water are different, because gravity and surface tension supply the restoring force there.

What are compressions and rarefactions?

They are the parts of a longitudinal wave. A compression is a region where particles are squeezed close together, so pressure and density are higher than normal. A rarefaction is a region where particles are spread out, so pressure and density are lower. The distance from one compression to the next is the wavelength.

Are water waves transverse or longitudinal?

Water surface waves are neither purely transverse nor purely longitudinal. As a wave passes, water near the surface moves in a roughly circular path, rising and falling while also moving forward and back. Deep below the surface the motion fades away. Sound traveling through the body of the water, however, is purely longitudinal.

Which type of seismic wave is longitudinal?

Primary waves, or P waves, are longitudinal. They squeeze and stretch rock along their direction of travel and are the fastest seismic waves, so they arrive first. Secondary waves, or S waves, are transverse, shaking rock sideways. They travel more slowly and cannot pass through liquids, which helped scientists discover Earth's liquid outer core.

How can you show both types of waves with a spring toy?

Stretch a long spring toy across a smooth floor with a partner holding the far end. Shake your end quickly from side to side and a transverse pulse runs along it. Push your end sharply toward your partner and pull it back, and a longitudinal pulse of bunched-up coils travels along it instead. Same spring, two kinds of wave.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.