
At a Glance
Physics formulas are equations that relate quantities like distance, time, force and energy. The most used include v = d/t, F = ma, KE = ½mv², W = Fd, P = W/t, p = mv, v = fλ and V = IR. Our sheets group them by topic and list each variable with its SI unit.
- What it covers
- 14 formula sheets, from kinematics to nuclear physics
- Each sheet lists
- Equation, variable names, SI units, rearranged forms
- Units
- SI throughout, following the BIPM SI Brochure
- Constants
- NIST CODATA 2022 values (G, c, h, e and more)
- Best for
- Grades 8–12, AP Physics 1 and 2, intro college physics
- Pair with
- Calculators and worksheets for each topic
On this page
- What Is a Physics Formula?
- Which Formula Sheets Cover Mechanics?
- Where Are the Formulas for Waves, Electricity, Light and Heat?
- How Do You Use a Physics Formula Correctly?
- How Do Formulas Show Up on Graphs?
- How Can You Practice Physics Formulas?
- In What Order Should You Learn Physics Formulas?
- All pages in this guide
- Key Facts
- FAQ
What Is a Physics Formula?
A physics formula is a rule written in symbols that says how one measurable quantity depends on others.
Formulas are short, but they pack in a lot of physics. Every one comes with conditions:
Some formulas are definitions, like speed or density. Others are laws found by experiment, like Ohm's law. A third group is derived from deeper laws, such as the kinematic equations, which follow from the definitions of velocity and acceleration.
Which Formula Sheets Cover Mechanics?
Mechanics is the study of motion and the forces that cause it, and it fills the first half of most physics courses. We split it into five sheets:
- Kinematics formulas: speed, velocity, acceleration, the four constant-acceleration equations, free fall and projectiles.
- Force and Newton's laws formulas:
, weight, friction, springs and inclines. - Work, energy and power formulas: kinetic and potential energy, work, power and efficiency.
- Momentum and impulse formulas:
, impulse and collisions. - Circular and rotational motion formulas: centripetal force, torque and angular momentum.
The gravity and orbit formulas sheet and the fluid and pressure formulas sheet extend mechanics to planets, satellites, liquids and gases.
Where Are the Formulas for Waves, Electricity, Light and Heat?
Beyond mechanics, each branch has its own sheet. The waves, oscillations and sound formulas cover
The light and optics formulas include Snell's law and the lens and mirror equations. The heat and thermodynamics formulas cover specific heat, latent heat and the gas laws. Finally, the modern physics formulas and nuclear physics formulas deal with photons, relativity, half-life and mass-energy equivalence.
| Branch | Formula | In words | Sheet |
|---|---|---|---|
| Kinematics | v = v0 + a t | Final velocity from starting velocity, acceleration and time | Kinematics formulas |
| Forces | F = m a | Net force equals mass times acceleration | Force formulas |
| Energy | KE = ½ m v² | Energy of motion | Energy formulas |
| Momentum | p = m v | Mass times velocity | Momentum formulas |
| Circular motion | F = m v² / r | Inward force for circular motion | Rotational motion formulas |
| Gravity | F = G m1 m2 / r² | Attraction between two masses | Gravity formulas |
| Fluids | P = F / A | Pressure is force per area | Fluid formulas |
| Waves | v = f λ | Wave speed is frequency times wavelength | Wave formulas |
| Electricity | V = I R | Ohm's law | Electricity formulas |
| Magnetism | F = |q| v B sin θ | Magnetic force on a moving charge | Magnetism formulas |
| Optics | n1 sin θ1 = n2 sin θ2 | Snell's law of refraction | Optics formulas |
| Heat | Q = m c ΔT | Heat needed to change temperature | Thermodynamics formulas |
| Modern physics | E = h f | Energy of a photon | Modern physics formulas |
| Nuclear physics | E = m c² | Mass-energy equivalence | Nuclear physics formulas |
| Source: Formulas from our formula data set (data/formulas.json) · Retrieved October 2026 | |||
How Do You Use a Physics Formula Correctly?
Most mistakes in physics problems come from how a formula is used, not from choosing the wrong one. A reliable routine looks like this:
- List what you know and what you need, each with its unit.
- Pick a formula that contains the unknown and only quantities you know, and check its conditions.
- Convert everything to SI units first, for example kilometers per hour to meters per second. Our unit conversion guide shows how.
- Rearrange the formula for the unknown before putting numbers in.
- Substitute, calculate, and round to sensible significant figures.
- Check that the unit of the answer makes sense, a quick form of dimensional analysis.
Our problem solving in physics page walks through this method with full examples.
| Symbol | Quantity | SI unit |
|---|---|---|
| d, x | distance, displacement | meter (m) |
| t | time | second (s) |
| v | velocity or speed | m/s |
| a | acceleration | m/s² |
| m | mass | kilogram (kg) |
| F | force | newton (N) |
| W, E | work, energy | joule (J) |
| P | power (or pressure) | watt (W) or pascal (Pa) |
| f | frequency | hertz (Hz) |
| λ | wavelength | meter (m) |
| I | electric current | ampere (A) |
| V | voltage | volt (V) |
| R | resistance | ohm (Ω) |
| T | temperature (or period) | kelvin (K) or second (s) |
| Source: SI units from the BIPM SI Brochure (data/si-units.json) · Retrieved October 2026 | ||
How Do Formulas Show Up on Graphs?
Many formulas can be read straight off a graph. On a velocity-time graph, the slope is the acceleration,
This link works in both directions. Plotting lab data and finding a straight line is how experimenters test a formula, and the slope often gives a constant, such as a spring's stiffness or a resistor's resistance. Our graphing in physics and velocity-time graph pages go further.

How Can You Practice Physics Formulas?
Memorizing a formula is only the start; using it on new situations is what builds skill. Work through problems on paper, then check each answer with one of our physics calculators, which show the substitution step by step. If your number differs, comparing the steps usually reveals the slip.
For structured practice, our printable physics worksheets come with answer keys. A good place to begin is the speed, velocity and acceleration worksheets, followed by the Newton's second law worksheets. The numbers in every constant we quote come from our physical constants pages.
In What Order Should You Learn Physics Formulas?
- Kinematics, which uses only distance, time, velocity and acceleration.
- Forces and Newton's laws, which explain why motion changes.
- Energy and momentum, two powerful shortcuts for motion problems.
- Circular motion and gravity.
- Waves, then electricity and magnetism.
- Optics, thermodynamics and finally modern and nuclear physics.
This order mirrors most high school and AP courses, so each sheet builds on symbols you have already met.
All Physics Formulas (14)
formulasElectricity and Circuit Formulas
formulasWork, Energy and Power Formulas
formulasFluid and Pressure Formulas
formulasForce and Newton's Laws Formulas
formulasGravity and Orbit Formulas
formulasKinematics Formulas
formulasMagnetism and Electromagnetism Formulas
formulasModern Physics Formulas
formulasMomentum and Impulse Formulas
formulasNuclear Physics Formulas
formulasLight and Optics Formulas
formulasCircular and Rotational Motion Formulas
formulasHeat and Thermodynamics Formulas
formulasWaves, Oscillations and Sound FormulasKey Facts
- A physics formula links measurable quantities, and every symbol stands for a quantity with a unit.
- Every formula has conditions, such as constant acceleration or being near a planet's surface.
- Converting all values to SI units before substituting prevents most calculation errors.
- Rearranging a formula for the unknown before adding numbers keeps the working clear.
- Checking the unit of the final answer catches many algebra slips.
- On a velocity-time graph, the slope is acceleration and the area is displacement.
- Our sheets cover 14 topics, from kinematics to nuclear physics.
Frequently Asked Questions
What are the most important physics formulas?
For a first physics course, the core set is v = d/t, a = Δv/Δt, the kinematic equations, F = ma, W = mg, KE = ½mv², PE = mgh, W = Fd, P = W/t, p = mv, v = fλ and V = IR. These cover motion, forces, energy, momentum, waves and circuits. Most other formulas in introductory physics build on or combine these.
How do you memorize physics formulas?
Understand what each formula means instead of memorizing letters. Know which quantity depends on which, check units, and practice using the formula on many different problems. Writing your own one-page sheet from memory, then comparing it with ours, shows what you have not yet learned. Spaced practice over several days works far better than one long session before a test.
Do you get a formula sheet on physics exams?
It depends on the exam. AP Physics exams and many state and national exams provide an official equation sheet, while some classroom tests do not. Even when a sheet is supplied, you still need to know what each symbol means, which formula fits the situation and when its conditions apply. Practicing with a sheet like ours helps you find formulas quickly.
What is the difference between a formula and an equation in physics?
In everyday physics teaching the words are used almost interchangeably. Strictly, an equation is any statement that two expressions are equal, while a formula is an equation that gives a general rule for calculating one quantity from others, such as KE = ½mv². So every formula is an equation, but a specific line like 3x + 2 = 11 is an equation, not a formula.
Why do physics formulas use SI units?
The SI system is built so that its units fit together without extra factors. A newton is defined as one kilogram meter per second squared, so F = ma works directly with kilograms and meters per second squared. Mixing units such as grams, hours or miles breaks that fit and produces wrong answers unless you convert first.
What does Δ mean in physics formulas?
The Greek capital letter delta, Δ, means change in. Δv is the change in velocity, final minus initial, and Δt is the time interval. So a = Δv/Δt reads as acceleration equals the change in velocity divided by the time taken. A positive Δ means the quantity increased, and a negative one means it decreased.


