
At a Glance
A scalar has magnitude only, such as 20 kg or 15 seconds, and adds like ordinary numbers. A vector has magnitude and direction, such as 20 N pointing east, and adds tip to tail. For a vector with perpendicular components, its size is A = sqrt(Ax^2 + Ay^2).
- Scalar
- Magnitude only (number + unit)
- Vector
- Magnitude and direction
- Scalar examples
- Mass, time, distance, speed, energy, temperature
- Vector examples
- Displacement, velocity, acceleration, force, momentum
- Size of a vector
- A = sqrt(Ax^2 + Ay^2)
On this page
- What Is the Difference Between Scalar and Vector Quantities?
- How Are Scalars and Vectors Defined?
- What Are Examples of Scalar and Vector Quantities?
- How Do You Add Scalars and Vectors?
- How Are Vectors Written and Drawn?
- What Happens When You Multiply a Scalar by a Vector?
- Why Does the Difference Between Scalars and Vectors Matter?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is the Difference Between Scalar and Vector Quantities?
Some measurements are complete as soon as you state a number and a unit. If someone tells you the oven is at 200 °C or the movie lasts 110 minutes, nothing is missing. These are scalar quantities.
Other measurements leave you stuck without a direction. "Walk 300 meters" does not tell you where you will end up, but "walk 300 meters north" does. A push of 50 N could close a door or open it, depending on which way you push. Quantities like these are vectors: they carry a magnitude and a direction together.
This one difference changes how the quantities are written, drawn and combined. The table below sets them side by side, and the rest of the page shows what the difference means in practice.
| Feature | Scalar | Vector |
|---|---|---|
| What it has | Magnitude only | Magnitude and direction |
| How it is written | Plain letter, e.g. m or t | Bold or with an arrow, e.g. F or F⃗ |
| How it is drawn | A number, no arrow | An arrow to scale |
| How two of them add | Ordinary arithmetic | Tip to tail, or by components |
| Sum of 3 and 4 units | Always 7 | Anywhere from 1 to 7, depending on angle |
| Meaning of a negative sign | Below zero on a scale (if allowed) | Points in the negative direction |
| Changes if only direction changes? | No | Yes |
| Number of values needed in 2D | One | Two (components, or size plus angle) |
| Motion examples | Distance, speed, time | Displacement, velocity, acceleration |
| Force and energy examples | Energy, work, power | Force, weight, momentum |
| Multiplied by a scalar | Another scalar | A vector in the same or opposite direction |
| Typical tool | Calculator | Diagram, trigonometry, components |
| Source: Definitions as used in standard SI mechanics; examples are illustrative · Retrieved October 2026 | ||
How Are Scalars and Vectors Defined?
A scalar is a quantity described completely by its magnitude, a single number with a unit. Scalars can be positive, and some, like temperature in Celsius or electric charge, can also be negative, but that sign does not point anywhere in space.
A vector is a quantity that has both magnitude and direction and obeys the rules of vector addition. In diagrams a vector is drawn as an arrow: its length shows the magnitude and its heading shows the direction. In print it is written in bold,
Every vector has a scalar hidden inside it: its magnitude. The size of a velocity is a speed, and the size of a displacement is a straight-line distance. That is why many quantities come in matched pairs, explored in speed vs velocity and distance vs displacement.
What Are Examples of Scalar and Vector Quantities?
A quick test: ask whether the quantity would change meaning if you turned it around. If "east" versus "west" makes a difference, it is a vector.
- Scalars: mass, time, distance, speed, volume, density, temperature, energy, work, power, pressure and electric charge.
- Vectors: displacement, velocity, acceleration, force, weight, momentum, impulse, torque, and electric and magnetic fields.
Some pairs surprise students. Work and energy are scalars even though they come from forces and displacements. Weight is a vector, while mass is a scalar, a contrast covered on mass vs weight. Electric current has a direction along a wire but is still treated as a scalar, because currents meeting at a junction add like ordinary numbers rather than as arrows.
How Do You Add Scalars and Vectors?
Scalars add with ordinary arithmetic. A 2 kg bag plus a 3 kg bag is always 5 kg, and 20 minutes plus 15 minutes is always 35 minutes. Direction never enters the calculation.
Vectors add tip to tail. Draw the first arrow, start the second arrow where the first one ends, and the result, called the resultant, runs from the start of the first to the tip of the last. Two forces of 35 N and 20 N can give a total anywhere from 15 N (opposite directions) to 55 N (same direction). In the diagram, they act at right angles and the resultant is about 40.3 N (computed).
For arrows at right angles, the Pythagorean theorem gives the size of the resultant,
Here is the formula for the magnitude of a two-dimensional vector from its perpendicular components, with each variable and the rearranged forms.
| Symbol | Quantity | SI unit |
|---|---|---|
| magnitude of the vector | dimensionless (1) | |
| x-component | dimensionless (1) | |
| y-component | dimensionless (1) |
Rearranged to find another variable:
Valid for: components in the same unit as the vector (any vector quantity); direction θ = arctan(A_y/A_x), adjusted for quadrant.
Example 1 How far did the drone end up?
A delivery drone flies 9 m east and then 5 m north. Treating east as the x-direction and north as the y-direction, its displacement has components Ax = 9 and Ay = 5 (in meters). What is the magnitude of its displacement?
- Given:
- x-component:
- y-component:
- x-component:
- Formula:
- Substitute:
- Answer:
The drone flew 14 m of path, a scalar distance, but the straight-line arrow from start to finish is shorter than that path and points north of east.

How Are Vectors Written and Drawn?
On paper, vectors appear as arrows drawn to scale. A force diagram might use 1 cm for every 10 N, so a 35 N force becomes a 3.5 cm arrow pointing the right way. Scalars have no arrow; they are just numbers written beside the drawing.
In equations, a vector is often broken into components along chosen axes, for example
What Happens When You Multiply a Scalar by a Vector?
Multiplying a vector by a positive scalar stretches or shrinks the arrow without turning it. Double the mass and the weight arrow doubles in length but still points down. Multiplying by a negative scalar flips the arrow to the opposite direction.
Many laws of physics have exactly this form. In Newton's second law,
Two vectors can also be combined into a scalar. Work is built from a force and a displacement, but the result is a plain number of joules, because only the part of the force along the motion counts.
Example 2 A scalar times a vector
A climber's mass is 75 kg, a scalar. The gravitational field near Earth's surface is a vector of size 9.80665 m/s² pointing straight down. What is the size of her weight, the vector you get by multiplying the two?
- Given:
- mass:
- acceleration due to gravity:
- mass:
- Formula:
- Substitute:
- Answer:
The answer keeps the direction of g, straight down, because multiplying by a positive scalar only stretches a vector.
Why Does the Difference Between Scalars and Vectors Matter?
Treating a vector like a scalar gives wrong answers. A pilot who flies at 250 km/h into a 40 km/h headwind does not cover ground at 290 km/h; the wind's direction makes the ground speed smaller. A boat crossing a river ends up downstream unless the captain aims upstream, because the water's velocity adds to the boat's as an arrow.
Engineers check that the forces on a bridge add to zero as vectors, not just as sizes. Navigators, game programmers and weather forecasters all work with vectors every day. Practice the skill with our vectors worksheets, which include printable answer keys, then try the quiz below.
Common Misconceptions
Myth: Any quantity that can be negative is a vector.
Physics: Temperature in Celsius and electric charge can be negative but are scalars. A vector's sign only shows direction along an axis, while a scalar's sign is a position on a number scale.
Myth: Two forces of 30 N and 40 N always add to 70 N.
Physics: That is only true when they point the same way. Depending on the angle between them, the resultant can be any size from 10 N to 70 N.
Myth: Speed and velocity are both vectors.
Physics: Speed is a scalar, the magnitude of velocity. Velocity is the vector, because it includes direction.
Myth: Energy is a vector because it comes from forces.
Physics: Energy and work are scalars. A force and a displacement combine into a single number of joules that has no direction.
Key Facts
- A scalar has magnitude only, while a vector has magnitude and direction.
- Mass, time, distance, speed, energy and temperature are scalars.
- Displacement, velocity, acceleration, force and momentum are vectors.
- Scalars add with ordinary arithmetic, while vectors add tip to tail or by components.
- The size of a 2D vector from its components is A = sqrt(Ax^2 + Ay^2).
- Multiplying a vector by a scalar changes its length and can reverse its direction, but never turns it sideways.
- In one dimension, the direction of a vector is shown by a plus or minus sign.
Quick Quiz: How Well Do You Know Scalar vs Vector?
6 questions. Tap an answer to check it.
Which of these is a vector quantity?
Acceleration has both size and direction, so it is a vector.
Which of these is a scalar quantity?
Speed is the magnitude of velocity and has no direction.
Two forces of 6 N and 8 N act at right angles. What is the size of the resultant?
sqrt(6^2 + 8^2) = sqrt(100) = 10 N.
What is the largest possible sum of a 5 N force and a 3 N force?
The sum is largest when both forces point the same way: 5 N + 3 N = 8 N.
What happens to a vector when you multiply it by -2?
The 2 doubles the length and the negative sign flips the direction.
Which pair contains one scalar and one vector?
Mass is a scalar, while weight is a force and therefore a vector.
Frequently Asked Questions
What is the difference between scalar and vector quantities?
A scalar quantity has only a magnitude, a number with a unit, such as 12 kg or 30 seconds. A vector quantity has both a magnitude and a direction, such as 12 N to the left or 30 m/s north. Scalars add like ordinary numbers, while vectors must be added with their directions taken into account, either with arrows or with components.
Is velocity a scalar or a vector?
Velocity is a vector because it includes both how fast an object moves and in which direction. Its magnitude is called speed, which is a scalar. Two cars driving at 25 m/s in opposite directions have the same speed but opposite velocities, and a car rounding a curve at steady speed has a changing velocity.
Is time a scalar or a vector?
Time is a scalar. A time interval such as 45 seconds has a size but no direction in space. Even though time only moves forward, that is not a spatial direction like north or up. Time intervals add as ordinary numbers, so 20 seconds followed by 25 seconds is always 45 seconds.
Is force a vector quantity?
Yes. A force always acts in a particular direction, and the same size of force can have completely different effects depending on where it points. That is why forces are drawn as arrows in free-body diagrams and why the net force on an object is found by adding the individual forces as vectors rather than as plain numbers.
Is energy a scalar or vector?
Energy is a scalar. Kinetic energy, potential energy and thermal energy all have a size in joules but no direction. A ball moving east at 10 m/s has exactly the same kinetic energy as an identical ball moving west at 10 m/s. Work, which transfers energy, is also a scalar.
How do you find the magnitude of a vector?
If you know the vector's perpendicular components, use the Pythagorean theorem: A = sqrt(Ax^2 + Ay^2). In three dimensions add a third term for the z-component. The magnitude is always zero or positive and has the same unit as the vector. For a force with components of 6 N and 8 N, the magnitude is 10 N.
Can a vector have zero magnitude?
Yes. A vector with zero magnitude is called the zero vector, and it has no defined direction. For example, the net force on a book resting on a table is zero, because the upward push of the table exactly cancels the book's weight. The displacement after a complete round trip is also a zero vector.
Why is distance a scalar but displacement a vector?
Distance is the total length of the path traveled, which is just a number of meters no matter which way you went. Displacement is the straight-line change in position from start to finish, so it needs a direction to be complete. Walking around a block gives a large distance but a displacement of zero.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








