One vector that does the work of many

Resultant Vector

A resultant vector is the single vector that has the same effect as two or more vectors acting together; it is their vector sum. Its magnitude tells you how strong the combined effect is, and its direction tells you which way it acts. A resultant force, for example, is the one push that would move an object exactly as all the real pushes do.

Small sailboat heeling as it crosses choppy water at an angle to the wind, moving along the resultant of several forces
A sailboat moves along the direction of the resultant of its sail, keel, water and weight forces, not straight downwind.

At a Glance

The resultant vector is the vector sum of all the vectors acting together. Add the x components to get Rx and the y components to get Ry, then R = sqrt(Rx^2 + Ry^2) and its direction is θ = arctan(Ry/Rx). For two vectors A and B with angle φ between them, R = sqrt(A^2 + B^2 + 2AB cos φ).

Symbol
R (or R, Fnet for forces)
Magnitude
R = √(Rx² + Ry²)
Two vectors
R = √(A² + B² + 2AB cos φ)
Range for two vectors
|A − B| ≤ R ≤ A + B
Opposite of resultant
Equilibrant, same size, reversed
On this page
  1. What Is a Resultant Vector?
  2. The Resultant Explained Simply
  3. How Do You Find the Magnitude of a Resultant Vector?
  4. What Is the Formula for the Resultant of Two Vectors?
  5. How Do You Find the Direction of the Resultant?
  6. What Are the Largest and Smallest Possible Resultants?
  7. What Is the Equilibrant of a Resultant?
  8. Where Do Resultant Vectors Show Up in Everyday Life?
  9. Why Does the Resultant Force Matter for Motion?
  10. Practice Finding Resultant Vectors
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Is a Resultant Vector?

A resultant vector is the overall vector you get when several vectors are combined. It answers one practical question: if all these arrows were replaced by a single arrow, what would that arrow have to be? The answer has a size and a direction, like every vector quantity.

The word appears with many physical quantities. The resultant displacement of a hike is the straight line from the trailhead to the end point. The resultant velocity of a swimmer in a current is the motion an observer on the shore actually sees. The resultant force on an object is better known as the net force, and it alone decides the object's acceleration.

The process of finding a resultant is vector addition. This page focuses on the answer itself: how large it can be, which way it points, and what it tells you.

The Resultant Explained Simply

Picture two friends pushing a heavy shopping cart, one from behind and one from the side. The cart does not go straight ahead or straight sideways. It rolls in a slanted direction somewhere between the two pushes.

That slanted direction, together with how hard the cart is effectively pushed, is the resultant. If a third friend stood in front and pushed with exactly the right force in exactly the right direction, the cart would not move at all.

How Do You Find the Magnitude of a Resultant Vector?

The most reliable route is through components. Resolve every vector into its x and y parts, add the x parts to get Rx and the y parts to get Ry. Those two numbers describe the resultant completely, and its size follows from the Pythagorean theorem, R=Rx2+Ry2.

When there are only two vectors and they are perpendicular, you can skip straight to the Pythagorean step. Their sizes already are the components of the resultant. A 4 m/s sideways drift and a 2.5 m/s climb, as in the first example below, combine this way.

If any of the vectors are at awkward angles, our guide to resolving vectors into components covers the sine and cosine step and the sign rules.

When the components of the resultant are known, this is the formula for its size; the rearranged forms find a missing component.

A=Ax2+Ay2
What each symbol means
SymbolQuantitySI unit
Amagnitude of the vectordimensionless (1)
Axx-componentdimensionless (1)
Ayy-componentdimensionless (1)

Rearranged to find another variable:

Ax=A2−Ay2Ay=A2−Ax2

Valid for: components in the same unit as the vector (any vector quantity); direction θ = arctan(A_y/A_x), adjusted for quadrant.

Example 1 A hot-air balloon drifting while it climbs

A hot-air balloon rises at 2.5 m/s while a breeze carries it sideways at 4 m/s. What is the magnitude of the balloon's resultant velocity?

  1. Given:
    • x-component: Ax=4 m/s
    • y-component: Ay=2.5 m/s
  2. Formula: A=Ax2+Ay2
  3. Substitute: Ax=4 m/s,Ay=2.5 m/s
  4. Answer: A=4.717 m/s (16.98 km/h, 10.55 mph)

The balloon climbs along a line about 32° above the horizontal (computed with arctan(2.5/4)), much flatter than it looks from the basket.

What Is the Formula for the Resultant of Two Vectors?

For exactly two vectors A and B with an angle φ between their directions (both drawn from the same point), the size of the resultant is R=A2+B2+2ABcos⁡φ. This is the law of cosines applied to the parallelogram the two vectors form.

The formula contains the special cases you already know. At φ = 0°, cos φ = 1 and the expression collapses to R = A + B. At φ = 90°, cos φ = 0 and you get the Pythagorean theorem. At φ = 180°, cos φ = −1 and R = |A − B|.

Be careful about which angle you use. The φ in this formula is the angle between the two vectors when they start from the same point. Some textbooks write the formula with a minus sign; those use the interior angle of the tip-to-tail triangle, which is 180° − φ.

Example 2 Two tractors pulling one stump

Two tractors pull on a tree stump with chains. One pulls with 12 kN and the other with 9 kN, and the angle between the chains is 50°. What is the size of the resultant pull on the stump?

  1. Given:
    • F_1: F1=12 kN
    • F_2: F2=9 kN
    • φ: φ=50 °
  2. Formula: R=F12+F22+2F1F2cos⁡φ
  3. Substitute: F1=12 kN,F2=9 kN,φ=50 °
  4. Answer: R=19.07 kN

The answer is less than the 21 kN you would get by adding the numbers, because the chains do not pull in the same direction.

Pulls of 12 kN and 9 kN with 50 degrees between them, added tip to tail into a dashed resultant of about 19.1 kN
The 12 kN and 9 kN chain pulls from the examples combine into one resultant of about 19.1 kN that leans toward the stronger chain.

How Do You Find the Direction of the Resultant?

With components, the direction is θ=arctan⁡(Ry/Rx), measured from the positive x axis. Because a calculator's arctan cannot tell left from right, add 180° whenever Rx is negative.

For two vectors it is often more useful to give the angle measured from one of them. Line up the x axis with vector A; then B has components Bcos⁡φ and Bsin⁡φ, and the angle of the resultant from A is arctan(Bsin⁡φA+Bcos⁡φ).

A good sanity check: the resultant of two vectors always lies between them, and closer to the larger one. If your angle comes out outside that wedge, a sign is wrong.

Example 3 Which way does the stump get pulled?

For the same two chains (12 kN and 9 kN with 50° between them), what angle does the resultant make with the 12 kN chain?

  1. Given:
    • F_1: F1=12 kN
    • F_2: F2=9 kN
    • φ: φ=50 °
  2. Formula: θ=arctan(F2sin⁡φF1+F2cos⁡φ)
  3. Substitute: F1=12 kN,F2=9 kN,φ=50 °
  4. Answer: θ=21.19 °

The resultant leans toward the stronger chain, lying less than halfway across the 50° gap.

What Are the Largest and Smallest Possible Resultants?

For two vectors of fixed size, the resultant is largest when they point the same way and smallest when they point opposite ways. In symbols, |A−B|≤R≤A+B. This is the triangle inequality: one side of a triangle can never be longer than the other two put together.

The table shows what happens to the resultant of an 8 N and a 6 N force as the angle between them opens from 0° to 180°. The size falls smoothly from 14 N to 2 N. The direction swings away from the 8 N force at first, then swings back toward it as the two forces start to oppose each other.

With three or more vectors the smallest possible resultant can be zero even when the sizes differ, as long as the biggest vector is no larger than all the others combined.

Resultant of an 8 N force and a 6 N force as the angle between them changes
Angle between forces φResultant R (N)Angle of R from the 8 N force
0°14.000.0°
30°13.5312.8°
60°12.1725.3°
90°10.0036.9°
120°7.2146.1°
150°4.1146.9°
180°2.000.0° (along the 8 N force)
Source: Computed with R = √(A² + B² + 2AB cos φ) and arctan(B sin φ / (A + B cos φ)) · Retrieved October 2026

What Is the Equilibrant of a Resultant?

The equilibrant is the single vector that cancels a resultant. It has the same size as the resultant and points in exactly the opposite direction. Adding it to the original vectors makes the total zero.

For forces this idea is the heart of statics. If the stump in the examples below does not budge, the ground and roots must be supplying the equilibrant: about 19.1 kN pointing back between the two chains. Engineers designing an anchor bolt, a tent peg or a bridge bearing are really sizing an equilibrant. When all forces on an object cancel like this, it is in translational equilibrium.

Two chain pulls and an equal and opposite equilibrant of about 19.1 kN closing into a triangle, so the total force is zero
Adding the equilibrant closes the tip-to-tail chain into a triangle: the stump feels no overall force and stays put.

Where Do Resultant Vectors Show Up in Everyday Life?

Any time a motion or a force has more than one cause, you are looking at a resultant. A rowboat crossing a river lands downstream because its resultant velocity includes the current; the details are covered on our relative velocity page. A kite hangs at an angle because the resultant of wind, weight and string tension is zero.

Resultant displacement matters for anyone who navigates. A hiker who zigzags up a mountain may walk 8 km of trail yet end up only 3 km from the car in a straight line, which is what a rescue helicopter needs to know. Weather forecasters combine wind measurements at many heights into resultant winds, and sports analysts break a ball's flight into resultant velocities frame by frame.

Hiker on a summit looking down a long zigzag trail, showing that the resultant displacement is far shorter than the path walked
The trail zigzags for kilometers, but the resultant displacement is the short straight line from the start to the summit.

Why Does the Resultant Force Matter for Motion?

Newton's second law, F→net=ma→, uses the resultant force, not any single force. An object accelerates in the direction of the resultant force, even if no individual push points that way. A sailboat moving at an angle to the wind is a striking example: the sail and keel forces combine into a resultant with a forward part.

The same rule explains why a resultant force of zero means constant velocity, not necessarily rest. A car cruising on a straight highway has engine thrust, air drag, rolling friction, weight and the road's push all acting, yet the resultant is zero, so its velocity stays steady. Our pages on Newton's second law and net force follow this thread further.

Practice Finding Resultant Vectors

Work through a few perpendicular pairs first, then pairs at other angles, then three-vector problems. Our vectors worksheets follow that path with answer keys, and you can check any result with the vector addition calculator. For a reminder of why direction matters at all, see scalar vs vector.

Common Misconceptions

Myth: The resultant is always bigger than each of the vectors that make it.

Physics: When vectors point in widely different directions they partly cancel, so the resultant can be smaller than either one or even zero.

Myth: If the resultant force on an object is zero, the object must be at rest.

Physics: A zero resultant force means zero acceleration. The object can be at rest or moving in a straight line at constant speed.

Myth: The resultant of two vectors points halfway between them.

Physics: It only splits the angle evenly when the two vectors have equal size. Otherwise it leans toward the larger vector.

Myth: The resultant and the equilibrant are the same thing.

Physics: They have equal size but opposite directions. The resultant replaces the vectors; the equilibrant cancels them.

Key Facts

  • A resultant vector is the single vector with the same effect as several vectors acting together.
  • Its magnitude is R = √(Rx² + Ry²), where Rx and Ry are the sums of all the x and y components.
  • For two vectors with angle φ between them, R = √(A² + B² + 2AB cos φ).
  • The resultant of two vectors always lies between |A − B| and A + B.
  • The resultant of two vectors points between them and leans toward the larger one.
  • The equilibrant has the same size as the resultant but the opposite direction, and it cancels it.
  • An object accelerates in the direction of the resultant force, and a zero resultant force means constant velocity.
Did you know? Pilots on long flights point the nose slightly into a crosswind, a technique called crabbing, so that the resultant of the plane's own velocity and the wind's velocity carries it straight along the planned route. Many migrating birds are thought to compensate for wind drift in a similar way.

Quick Quiz: How Well Do You Know Resultant Vector?

6 questions. Tap an answer to check it.

  1. Two forces of 9 N and 4 N act on a box. Which resultant is impossible?

  2. In R = √(A² + B² + 2AB cos φ), what happens when φ = 90°?

  3. A 10 N force and a 6 N force act at an angle. The resultant points…

  4. The resultant force on a crate is 30 N east. What is the equilibrant?

  5. A car's resultant force is zero. What must be true?

  6. A resultant has Rx = −3 and Ry = 4. What is its magnitude?

Frequently Asked Questions

What is a resultant vector in simple terms?

A resultant vector is the one arrow that sums up several arrows. If two ropes pull a box in different directions, the resultant is the single pull that would move the box in exactly the same way. It has a size, showing how strong the combined effect is, and a direction, showing which way the combined effect acts.

How do you calculate the resultant of two vectors?

If the vectors are perpendicular, use the Pythagorean theorem on their sizes. For any other angle φ between them, use R = √(A² + B² + 2AB cos φ). For three or more vectors, resolve each into x and y components, add each set, and combine the totals with R = √(Rx² + Ry²). The direction comes from an arctangent in each case.

What is the difference between a resultant and a net force?

Net force is simply the resultant of all the forces on an object. Resultant is the general word and applies to any vector quantity, including displacement, velocity and acceleration. So every net force is a resultant, but a resultant velocity or resultant displacement is not a force. The method for finding them is the same.

Can a resultant vector be zero?

Yes. Two vectors of equal size pointing in opposite directions add to zero, and so do three or more vectors whose tip-to-tail chain closes into a loop. For forces, a zero resultant means the object is in equilibrium and its velocity is not changing. A chandelier hanging still from several chains is a good everyday example.

What is the maximum resultant of two vectors?

The maximum is the sum of their sizes, reached only when they point in exactly the same direction. A 7 N and a 5 N force can never produce more than 12 N together. Any angle between them reduces the resultant, and when they point in opposite directions it falls to its minimum, the difference of their sizes.

What is an equilibrant force?

The equilibrant is the single force that would cancel all the other forces on an object. It has the same magnitude as their resultant and points in the opposite direction. If a 20 N resultant pulls a crate toward the northeast, an equilibrant of 20 N toward the southwest would hold the crate in balance with no acceleration.

Does the order of adding vectors change the resultant?

No. Vector addition is commutative and associative, so you can add the vectors in any order and group them any way you like. A tip-to-tail drawing in a different order traces a different-looking path, but the final arrow from the first tail to the last tip, which is the resultant, is exactly the same.

Is resultant velocity the same as speed?

Not quite. Resultant velocity is a vector, so it includes a direction, while speed is only its size. A swimmer crossing a river may have a resultant velocity of 1.3 m/s at 23° downstream; the speed is 1.3 m/s. Two swimmers with the same speed can have very different resultant velocities if they head in different directions.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.