One wave spreading vs waves combining

Diffraction vs Interference

The difference between diffraction and interference is what produces the effect: interference is the combining of two or more overlapping waves, which reinforce or cancel each other, while diffraction is the spreading of a single wave as it passes an edge or goes through an opening. The two are closely linked, because the bright and dark bands in a diffraction pattern come from interference between parts of the same wavefront.

Soap bubble with swirling bands of color caused by light waves interfering in its thin film
The colors on a soap bubble come from interference between light reflected off the two surfaces of its film.

At a Glance

Interference happens when separate coherent waves overlap; for two slits the bright fringes sit at d sin θ = m λ. Diffraction happens when one wave spreads around an obstacle or through a gap; for a single slit the dark fringes sit at a sin θ = m λ. A double-slit pattern shows narrow, evenly spaced fringes, while a single-slit pattern shows one wide central band with fainter side bands.

Interference
Two or more waves overlapping and adding
Diffraction
One wave spreading at an edge or gap
Two-slit bright fringes
d sin θ = m λ
One-slit dark fringes
a sin θ = m λ
Pattern
Even fringes vs wide central band with fading sides
On this page
  1. What Is the Difference Between Diffraction and Interference?
  2. How Are Diffraction and Interference Defined?
  3. What Are the Equations for Diffraction and Interference?
  4. How Do Waves Add Up in Interference?
  5. How Do the Patterns Look Different?
  6. Who Discovered Diffraction and Interference of Light?
  7. What Are Examples of Diffraction and Interference?
  8. Where Can You Go Next?
  9. Common Misconceptions
  10. Key Facts
  11. Quiz
  12. FAQ

What Is the Difference Between Diffraction and Interference?

Diffraction and interference both show up as patterns of bright and dark bands, so they are often confused. The cleanest way to separate them is to count the waves. Interference needs at least two waves that overlap, such as the light coming from two separate slits. Diffraction starts with a single wave that gets cut off by an edge or squeezed through a gap and spreads out behind it.

The ideas are linked. Every diffraction pattern is really interference between the many tiny wavelets that make up one wavefront. And every multi-slit interference pattern also contains diffraction, because the light has to spread out of each slit before the beams can overlap.

The table below compares the two side by side. Later sections show the equations, the shapes of the patterns and where each effect appears in daily life.

Diffraction and interference compared side by side
FeatureDiffractionInterference
What happensOne wave spreads at an edge or gapTwo or more waves overlap and add
Number of sourcesOne wavefront (its own wavelets)Two or more coherent sources
Classic setupSingle slit or small holeDouble slit
Key equationa sin θ = m λ (dark fringes)d sin θ = m λ (bright fringes)
Allowed m values±1, ±2, … (no m = 0)0, ±1, ±2, …
Length in the equationSlit width aSlit separation d
Central bandWide, about twice the side bandsSame width as the other fringes
Fringe brightnessSide bands fade quicklyNearly equal for very narrow slits
Fringe spacingUneven, central band widerEven, Δy = λ L / d
Needs coherent light?No, but a single source shows it bestYes, for a stable pattern
Underlying causeInterference of wavelets from one wavefrontSuperposition of separate waves
Everyday exampleStarburst through a mesh curtainColors on a soap bubble
Source: Definitions as used in standard wave optics; examples are illustrative · Retrieved October 2026

How Are Diffraction and Interference Defined?

Interference is what happens when two or more waves occupy the same place at the same time. By the principle of superposition, their displacements add. Where crests meet crests the waves reinforce, called constructive interference. Where crests meet troughs they cancel, called destructive interference.

Diffraction is the bending and spreading of a wave around the edges of an obstacle or through an opening. It is strongest when the opening is close to the wavelength in size. Behind a narrow slit, light fans out into a pattern instead of making a sharp-edged stripe.

For a stable interference pattern the waves must be coherent, meaning they keep a fixed phase relationship. Two separate flashlights never produce visible fringes, but two slits lit by one laser do, because both slits share the same source.

What Are the Equations for Diffraction and Interference?

For two slits separated by a distance d, bright interference fringes appear at angles where dsin⁡θ=mλ, with m=0,±1,±2,…. At those angles the path from one slit is a whole number of wavelengths longer than the path from the other, so the waves arrive in step.

For a single slit of width a, dark diffraction fringes appear where asin⁡θ=mλ, with m=±1,±2,…. The equations look identical, but the meaning is reversed: in the single-slit case, the condition marks the dark bands. Pairing up wavelets from the two halves of the slit shows why they cancel at those angles.

This reversal is the most common exam trap in wave optics. Remember it this way: two slits, the equation gives bright; one slit, the equation gives dark. The details are on our pages for double-slit interference and single-slit diffraction.

Here is the double-slit interference equation, which gives the angles of the bright fringes, with each variable and its unit.

dsin⁡θ=mλ
What each symbol means
SymbolQuantitySI unit
dslit separationmeter (m)
θangle to the bright fringeradian (rad)
morder of the fringe (0, ±1, ±2, ...)dimensionless (1)
λwavelengthmeter (m)

Rearranged to find another variable:

λ=dsin⁡θmd=mλsin⁡θθ=arcsin(mλd)

Valid for: constructive interference; dark fringes at d sin θ = (m + ½)λ.

Example 1 Second bright fringe from two slits

Green light of wavelength 532 nm falls on two slits 0.1 mm apart. At what angle from the center line is the second-order (m = 2) bright fringe?

  1. Given:
    • slit separation: d=1×10−4 m
    • order of the fringe (0, ±1, ±2, ...): m=2
    • wavelength: λ=5.32×10−7 m
  2. Formula: θ=arcsin(mλd)
  3. Substitute: d=1×10−4 m,m=2,λ=5.32×10−7 m
  4. Answer: θ=0.6096 °

This is an interference maximum: the two slits' waves arrive in step, two whole wavelengths apart.

Example 2 First dark band from one slit

Blue light of wavelength 450 nm passes through a single slit 0.05 mm wide. At what angle from the center line does the first dark band (m = 1) appear?

  1. Given:
    • slit width: a=5×10−5 m
    • order of the minimum (non-zero integer): m=1
    • wavelength: λ=4.5×10−7 m
  2. Formula: θ=arcsin(mλa)
  3. Substitute: a=5×10−5 m,m=1,λ=4.5×10−7 m
  4. Answer: θ=0.5157 °

Same form of equation, opposite meaning: for one slit, m = 1 marks a dark band, not a bright one.

How Do Waves Add Up in Interference?

The first diagram below shows two equal waves that are perfectly in step. Adding them point by point gives a resultant with twice the amplitude: constructive interference. The second diagram shifts one wave by half a wavelength, a phase difference of 180°. Now every crest lands on a trough, and the two waves cancel completely: destructive interference.

Real patterns contain every phase difference in between, which is why the brightness changes smoothly across a fringe rather than switching on and off. Noise-cancelling headphones use the destructive case on purpose, playing a sound that is out of step with the noise around you.

Two identical in-phase waves adding to a resultant wave with twice the amplitude, constructive interference
In step: crests meet crests and the resultant has twice the amplitude.
Two equal waves half a wavelength out of step canceling to a flat line, destructive interference
Half a wavelength out of step: every crest meets a trough and the waves cancel.

How Do the Patterns Look Different?

A double-slit interference pattern is a row of narrow bright fringes that are evenly spaced. If the slits are very narrow, neighboring fringes are nearly equally bright. Their spacing on a screen at distance L is Δy=λL/d, so slits closer together spread the fringes further apart.

A single-slit diffraction pattern has one wide, bright central band, twice as wide as the others, with much fainter side bands that fade quickly outward. Making the slit narrower widens the whole pattern.

With real slits of finite width, you see both effects at once. The evenly spaced interference fringes sit inside a single-slit diffraction envelope, which dims them toward the edges. A diffraction grating, with thousands of slits, sharpens the interference maxima into thin bright lines, which is why gratings can separate colors so precisely.

Example 3 Fringe spacing on a far wall

A red laser of wavelength 633 nm lights two slits 0.2 mm apart, and the pattern lands on a wall 3 m away. How far apart are neighboring bright fringes on the wall?

  1. Given:
    • wavelength: λ=6.33×10−7 m
    • slit-to-screen distance: L=3 m
    • slit separation: d=2×10−4 m
  2. Formula: Δy=λLd
  3. Substitute: λ=6.33×10−7 m,L=3 m,d=2×10−4 m
  4. Answer: Δy=0.009495 m

The answer is in meters, so the fringes are a little under a centimeter apart, easy to see with the naked eye.

Who Discovered Diffraction and Interference of Light?

Diffraction of light was described in the 1660s by the Italian scientist Francesco Grimaldi, who noticed that shadows were slightly wider and fuzzier than straight rays predict. The effect stayed a puzzle for more than a century.

In the early 1800s, Thomas Young showed that light passing through two closely spaced openings produces bright and dark fringes, strong evidence that light behaves as a wave. You can follow his method on our Young's double-slit experiment page. In the late 1810s, Augustin-Jean Fresnel built a full wave theory of diffraction based on interfering wavelets, extending Huygens' principle.

What Are Examples of Diffraction and Interference?

Everyday interference:

  • The swirling colors on soap bubbles and oil films come from thin-film interference.
  • Noise-cancelling headphones cancel steady background hum.
  • Two speakers playing the same tone create loud and quiet spots around a room.

Everyday diffraction:

  • A streetlight seen through a fine mesh curtain shows a starburst of light.
  • Sound spreads through an open doorway into the next room.
  • Telescopes cannot resolve infinitely fine detail, because their round openings diffract light; see resolution and the Rayleigh criterion.

The rainbow sheen on the data side of a CD or DVD involves both. Its closely spaced tracks act like a grating: light diffracts from each track, and the diffracted waves interfere to send each color off at its own angle.

Where Can You Go Next?

Diffraction is also often confused with bending at a boundary, which is covered on diffraction vs refraction. For the bigger picture of light as a wave, start at the wave optics hub, and for printable practice problems try our light worksheets.

Common Misconceptions

Myth: Diffraction and interference are completely separate effects.

Physics: They are two views of the same physics. Diffraction patterns come from interference between parts of one wavefront, and interference between slits needs diffraction to spread the light out of each slit.

Myth: The equation a sin θ = m λ gives the bright bands of a single slit.

Physics: For a single slit it gives the dark bands. Only the double-slit equation, d sin θ = m λ, gives bright fringes.

Myth: Any two light sources will interfere and make fringes.

Physics: A stable pattern needs coherent sources with a fixed phase relationship. Two separate bulbs change phase randomly, so their fringes wash out.

Myth: Destructive interference destroys energy.

Physics: Energy is not lost. It is redistributed: the dark fringes have less energy and the bright fringes have correspondingly more.

Key Facts

  • Interference is the combining of two or more overlapping waves, which reinforce or cancel each other.
  • Diffraction is the spreading of a single wave around an edge or through an opening.
  • Double-slit bright fringes appear where d sin θ = m λ.
  • Single-slit dark fringes appear where a sin θ = m λ, the same form with the opposite meaning.
  • A single-slit pattern has a wide central band; a double-slit pattern has evenly spaced fringes.
  • Every diffraction pattern is caused by interference among wavelets from one wavefront.
  • Real double-slit patterns show interference fringes inside a diffraction envelope.
Did you know? Electrons, neutrons and even whole molecules produce interference and diffraction patterns when sent through suitably tiny slits or crystal lattices, which is direct evidence that matter has wave properties too.

Quick Quiz: How Well Do You Know Diffraction vs Interference?

6 questions. Tap an answer to check it.

  1. Interference requires

  2. For a single slit, the condition a sin θ = m λ gives the positions of

  3. Which pattern has a wide central band about twice as wide as the others?

  4. Two waves meet exactly half a wavelength out of step. The result is

  5. Why do two separate flashlights not produce visible interference fringes?

  6. In a double-slit setup, moving the slits closer together makes the fringes on the screen

Frequently Asked Questions

What is the main difference between diffraction and interference?

Interference is the result of two or more separate waves overlapping, so their displacements add to make brighter and darker regions. Diffraction is the spreading of a single wave when it meets an edge or passes through a gap. In short, interference is about combining waves, while diffraction is about one wave bending around obstacles.

Is diffraction a type of interference?

In a sense, yes. A diffraction pattern forms because every point across an opening acts as a source of small wavelets, and those wavelets interfere with each other. Physicists usually say interference when a few distinct sources are involved and diffraction when a continuous wavefront is involved, but the underlying physics is the same.

How can you tell a diffraction pattern from an interference pattern?

Look at the central band. A single-slit diffraction pattern has a wide central bright band, about twice as wide as the fainter side bands that fade quickly. A double-slit interference pattern has many narrow, evenly spaced fringes of similar brightness. Real double-slit patterns combine both, with even fringes that dim toward the edges.

Why does a single slit use a sin θ = m λ for dark fringes?

Split the slit into two halves. At the angle where a sin θ equals one wavelength, each wavelet from the top half has a partner in the bottom half that is exactly half a wavelength out of step. The pairs cancel, so the screen is dark there. The same pairing argument works for every whole number m.

Does sound show diffraction and interference?

Yes. Sound diffracts around doorways and corners because its wavelengths are similar to everyday openings. Sound also interferes: two speakers playing the same tone create loud spots and quiet spots around a room, and noise-cancelling headphones rely on destructive interference to reduce steady background noise.

What did Young's double-slit experiment show?

Thomas Young's experiment in the early 1800s showed that light passing through two narrow, closely spaced openings forms alternating bright and dark fringes. Particles traveling in straight lines could not explain that pattern, but overlapping waves could. It became one of the strongest early pieces of evidence that light behaves as a wave.

Do diffraction gratings use diffraction or interference?

Both. Each line on a grating diffracts light, spreading it out. The light from thousands of lines then interferes, producing very sharp bright maxima at angles given by d sin θ = m λ. Because the angle depends on wavelength, a grating separates white light into its colors, which makes it useful in spectrometers.

Why do soap bubbles show colors?

Soap bubble colors come from interference. Light reflects from both the outer and inner surfaces of the thin soap film. The two reflected waves travel slightly different distances, so some colors arrive in step and look bright while others cancel. As the film thickness changes, the colors swirl and shift.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.