
At a Glance
A longitudinal wave is one where the medium's particles move back and forth along the same line the wave travels, creating compressions and rarefactions. Its speed follows v = f λ, where the wavelength λ is the distance between two neighboring compressions. Sound waves and seismic P-waves are longitudinal.
- Particle motion
- Parallel to the direction of travel
- Key features
- Compressions and rarefactions
- Formula
- v = fλ
- Needs a medium?
- Yes: solid, liquid or gas
- Examples
- Sound, ultrasound, seismic P-waves, a pushed spring toy
On this page
- What Is a Longitudinal Wave?
- Longitudinal Waves Explained Simply
- What Are Compressions and Rarefactions?
- What Are the Parts of a Longitudinal Wave?
- How Do You Calculate the Speed of a Longitudinal Wave?
- Why Do Longitudinal Waves Travel Faster in Solids?
- How Are Longitudinal Waves Different From Transverse Waves?
- What Are Examples of Longitudinal Waves?
- Who First Worked Out the Speed of Sound Waves?
- Practice Longitudinal Wave Problems
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Longitudinal Wave?
A longitudinal wave is a disturbance that travels through a material by pushing and pulling its particles along the line of travel. Each particle nudges its neighbor forward, then springs back toward where it started. The particles themselves only jiggle around a resting position; it is the pattern of crowding and spacing that moves along.
You can feel this with a long stretched spring toy lying on a smooth floor. Give one end a quick shove forward and a band of squeezed coils races to the other end, while each coil only shifts a little and returns. That moving band is a longitudinal pulse. Push back and forth steadily and you get a continuous longitudinal wave.
Longitudinal waves are mechanical waves, so they always need a medium made of matter. They can travel through gases, liquids and solids, which is one reason sound reaches you through air, water and walls alike.
Longitudinal Waves Explained Simply
Picture a line of people standing shoulder to shoulder in a queue. The person at the back bumps into the one in front, who stumbles forward and bumps the next, and so on. The bump travels to the front of the line quickly, yet nobody actually walks to the front. Everyone just sways forward and back.
That traveling bump is exactly how a longitudinal wave works. The people are the particles, the crowding is a compression, and the gaps that open up behind it are rarefactions. The key point is that the swaying happens along the line, in the same direction the bump travels.
What Are Compressions and Rarefactions?
A compression is a region where the particles are pushed closer together than normal, so the density and pressure are slightly higher. A rarefaction is a region where the particles are pulled farther apart, so the density and pressure are slightly lower. The two always alternate along the wave.
In a sound wave in air, the pressure changes are tiny. Even normal conversation shifts the air pressure by only a small fraction of a pascal above and below the background pressure, yet your eardrum is sensitive enough to follow it.
A subtle detail shows up in the diagram below. Particles in the middle of a compression are not displaced at all at that instant; they are squeezed by neighbors moving in from both sides. So the pressure is greatest where the displacement is zero, and the displacement is largest halfway between a compression and a rarefaction.

What Are the Parts of a Longitudinal Wave?
Longitudinal waves share the same measurable parts of a wave as any other wave, just in a different shape:
- Wavelength (λ): the distance from the center of one compression to the center of the next, or from one rarefaction to the next.
- Amplitude: the largest distance a particle moves from its resting position. In sound, a larger amplitude means a louder sound.
- Frequency (f): the number of compressions passing a fixed point each second, measured in hertz.
- Period (T): the time one particle takes to complete one full back-and-forth cycle, equal to 1/f.
Compressions play the role that crests play in a transverse wave, and rarefactions play the role of troughs. That is why a graph of pressure against position for a sound wave looks like an ordinary wavy line.
How Do You Calculate the Speed of a Longitudinal Wave?
The speed of a longitudinal wave follows the general wave relation
This relation lets you find any one of the three quantities from the other two. If you know the frequency of a tone and the speed of sound, you can get its wavelength, and so on. Our wave speed calculator handles all three directions with unit conversions, and the wave speed formula page explains the relation in more depth.
Longitudinal waves obey the same speed relation as every other wave. The variables and their SI units are listed below.
| Symbol | Quantity | SI unit |
|---|---|---|
| wave speed | meter per second (m/s) | |
| frequency | hertz (Hz) | |
| wavelength | meter (m) |
Rearranged to find another variable:
Valid for: periodic waves.
Example 1 Pulses on a stretched spring toy
A student pushes one end of a long, stretched spring toy back and forth 3 times per second. The compressions along the spring are 0.45 m apart. How fast does the wave travel along the spring?
- Given:
- frequency:
- wavelength:
- frequency:
- Formula:
- Substitute:
- Answer:
(4.86 km/h, 3.02 mph)
Pushing faster would squeeze the compressions closer together, but the speed along the same spring would stay about the same.
Why Do Longitudinal Waves Travel Faster in Solids?
The speed of a longitudinal wave depends on the medium, not on the source. Two properties matter: how stiff the material is, meaning how strongly it resists being squeezed, and how dense it is. A stiffer material pushes back harder and passes the disturbance on faster, while a denser one has more inertia and responds more slowly.
Solids such as steel are extremely hard to compress, and that stiffness wins over their high density, so sound races through them at thousands of meters per second. Gases are very easy to compress, so sound is slow in air, roughly 343 m/s at room temperature. Liquids sit in between. Our page on why sound travels faster in solids explores this in more detail.
The table shows typical speeds and the wavelength the same 440 Hz tone would have in each material. Because the frequency stays fixed as the wave crosses from one material to another, the wavelength stretches wherever the wave moves faster.
Example 2 A whistle heard underwater
A lifeguard's whistle produces a 2,000 Hz tone. Sound travels through the pool water at about 1,480 m/s. What is the wavelength of the tone in the water?
- Given:
- wave speed:
- frequency:
- wave speed:
- Formula:
- Substitute:
- Answer:
In air the same tone would have a wavelength about four times shorter, because sound moves roughly four times slower in air than in water.
| Material | Typical wave speed (m/s) | Wavelength of a 440 Hz tone (m) |
|---|---|---|
| Air at 20 °C | about 343 | 0.78 |
| Helium gas at 20 °C | about 1,007 | 2.29 |
| Fresh water | about 1,480 | 3.36 |
| Pine wood, along the grain | about 3,800 | 8.64 |
| Window glass | about 5,600 | 12.7 |
| Steel | about 5,900 | 13.4 |
| Granite | about 6,000 | 13.6 |
| Source: Wavelengths computed with λ = v / f for f = 440 Hz · wave speeds are typical values that vary with temperature and composition · Retrieved October 2026 | ||
How Are Longitudinal Waves Different From Transverse Waves?
The difference is the direction of particle motion. In a longitudinal wave the particles move parallel to the wave's travel. In a transverse wave, such as a ripple on a rope, they move at right angles to it, up and down while the wave runs sideways.
This leads to practical differences. Transverse mechanical waves need a material that resists being sheared, so they travel through solids but not through the inside of liquids or gases. Longitudinal waves only need a material that resists being squeezed, which every state of matter does. Light is a transverse wave that needs no medium at all, while sound is longitudinal and cannot cross empty space.
For a full side-by-side breakdown, see transverse vs longitudinal waves.

What Are Examples of Longitudinal Waves?
Longitudinal waves are all around you, even if you never see them:
- Sound in air. A speaker cone pushes and pulls the air in front of it, sending compressions to your ear. See sound waves for the full story.
- Ultrasound. Medical scanners and sonar send longitudinal waves above the range of hearing and listen for the echoes. Read more about ultrasound.
- Seismic P-waves. The primary waves from an earthquake push and pull rock along their path, and they arrive first because they are the fastest seismic waves.
- A spring toy pushed end to end. The classic classroom demonstration of compressions moving along coils.
- A knock through a table. Put your ear on a table and tap the far end; the sound arrives through the wood as a longitudinal wave.
For a longer, sorted list that also covers transverse waves, browse our examples of transverse and longitudinal waves.
Example 3 Medical ultrasound in soft tissue
An ultrasound probe sends pulses at 3,500,000 Hz (3.5 MHz) into soft tissue, where sound travels at about 1,540 m/s. What is the wavelength of the ultrasound inside the body?
- Given:
- wave speed:
- frequency:
- wave speed:
- Formula:
- Substitute:
- Answer:
A wavelength well under a millimeter is what lets an ultrasound scanner show small structures; shorter waves resolve finer detail.

Who First Worked Out the Speed of Sound Waves?
Isaac Newton made one of the first serious attempts to calculate the speed of sound from the properties of air, treating sound as a series of pressure pulses. His estimate came out noticeably too low. More than a century later, physicists realized the missing piece: air warms slightly when it is compressed and cools when it expands, which makes it act stiffer than Newton assumed and raises the predicted speed to match measurements.
That correction was an early sign that waves carry energy and exchange it with the medium, an idea that still shapes how we model sound in air today.
Practice Longitudinal Wave Problems
Our printable sound waves worksheets include labeling diagrams of compressions and rarefactions plus speed and wavelength problems with answer keys. You can check results with the speed of sound calculator, then try the quiz below.
Common Misconceptions
Myth: In a sound wave, air travels from the speaker to your ear.
Physics: The air only moves back and forth around its resting place. What travels to your ear is the pattern of compressions and the energy it carries.
Myth: Longitudinal waves have no wavelength because they have no crests.
Physics: Their wavelength is the distance between neighboring compressions, which play the same role as crests.
Myth: Sound travels fastest in air because air is light.
Physics: Sound is slowest in gases. Solids are far stiffer, and that stiffness speeds the wave up more than their density slows it down.
Myth: Longitudinal waves can travel through a vacuum like light.
Physics: They need particles to push and pull, so they cannot cross empty space. That is why space is silent.
Key Facts
- In a longitudinal wave, particles of the medium vibrate parallel to the direction the wave travels.
- Compressions are regions of higher density and pressure, and rarefactions are regions of lower density and pressure.
- The wavelength of a longitudinal wave is the distance between the centers of two neighboring compressions.
- Longitudinal waves need a medium and can travel through solids, liquids and gases.
- Their speed obeys v = fλ and depends on the stiffness and density of the medium.
- Sound, ultrasound and seismic P-waves are all longitudinal waves.
- Longitudinal waves usually travel fastest in solids and slowest in gases.
Quick Quiz: How Well Do You Know Longitudinal Waves?
6 questions. Tap an answer to check it.
In a longitudinal wave, how do the particles of the medium move?
Particles oscillate back and forth along the same line the wave travels.
What is a region of crowded particles in a longitudinal wave called?
A compression is where particles are pushed closer together.
Which of these is a longitudinal wave?
Sound in air travels as compressions and rarefactions.
A tone of 500 Hz has a wavelength of 3 m in water. What is the wave speed?
v = fλ = 500 Hz × 3 m = 1,500 m/s.
In which material does a longitudinal wave usually travel fastest?
Solids like steel are very stiff, which makes sound travel fastest.
Why is outer space silent?
Longitudinal sound waves need particles to push on, and space has almost none.
Frequently Asked Questions
What is a longitudinal wave in simple words?
A longitudinal wave is a push-and-pull wave. The particles of the material move forward and backward along the same line the wave is moving, bunching up in some places and spreading out in others. Sound is the best-known example. When you speak, your voice squeezes and stretches the air, and those squeezes travel outward to whoever is listening.
What are 3 examples of longitudinal waves?
Three common examples are sound waves traveling through air, ultrasound waves used in medical scans and sonar, and the primary P-waves produced by an earthquake. A fourth easy example is the wave you make by pushing one end of a stretched spring toy back and forth, which sends visible bands of squeezed coils along its length.
Is sound a longitudinal wave?
Yes. In air and other fluids, sound is a longitudinal wave: the vibrating source pushes and pulls the nearby molecules, creating alternating compressions and rarefactions that travel outward. Inside solids, sound can also travel as transverse waves, because solids resist being sheared, but the sound that reaches your ears through the air is always longitudinal.
What is the difference between a compression and a rarefaction?
A compression is a region where particles are crowded closer together than normal, so the pressure and density there are slightly higher. A rarefaction is a region where the particles are spread farther apart, so the pressure and density are slightly lower. In a longitudinal wave the two alternate, and one compression plus one rarefaction together make one wavelength.
How do you measure the wavelength of a longitudinal wave?
Measure the distance from the center of one compression to the center of the next compression. You can equally measure from one rarefaction to the next. If you know the wave speed and frequency instead, divide the speed by the frequency. For example, a 343 Hz tone in air moving at about 343 m/s has a wavelength of about one meter.
Can longitudinal waves travel through solids, liquids and gases?
Yes. Every state of matter resists being squeezed, so longitudinal waves can pass through all three. This is different from transverse mechanical waves, which need a material that resists shearing and so cannot travel through the interior of liquids or gases. Longitudinal waves usually move fastest in solids, slower in liquids and slowest in gases.
Why can't longitudinal waves travel through space?
A longitudinal wave works by particles pushing on their neighbors. In the near-vacuum of space there are almost no particles close enough to push on each other, so the disturbance has nothing to travel through. That is why astronauts use radios to talk during spacewalks: radio waves are electromagnetic and need no medium, while sound waves do.
Do particles in a longitudinal wave move with the wave?
No. Each particle oscillates back and forth around a fixed resting position and ends up roughly where it started. Only the disturbance and its energy move from place to place. If you watched a single dust grain floating in a sound wave, you would see it shiver forward and back rather than drift toward the listener.








