Fulcrum, load, effort

Examples of Levers

An example of a lever is any rigid bar that turns on a fixed pivot, called the fulcrum, so that a push in one place moves a load in another. Seesaws, wheelbarrows and tweezers are all levers. Below are 18 examples sorted into the three classes, including the levers inside your own body.

Children on a seesaw, a gardener with a wheelbarrow and a person sweeping with a broom in a park
A seesaw, a wheelbarrow and a broom show the three classes of lever side by side.

At a Glance

A lever is a rigid bar that pivots on a fulcrum. In a first-class lever the fulcrum sits between effort and load (seesaw, crowbar), in a second-class lever the load sits in the middle (wheelbarrow, nutcracker), and in a third-class lever the effort sits in the middle (tweezers, fishing rod). Its mechanical advantage is MA = F_o / F_i, which also equals effort arm divided by load arm.

Parts
Fulcrum (pivot), load (output) and effort (input)
Formula
MA = F_o / F_i = d_E / d_L
Class 1
Fulcrum in the middle: seesaw, crowbar, scissors
Class 2
Load in the middle: wheelbarrow, nutcracker, bottle opener
Class 3
Effort in the middle: tweezers, broom, your forearm
Memory aid
F-L-E: which part is in the middle gives class 1, 2 or 3
On this page
  1. How Do You Classify Examples of Levers?
  2. What Are Examples of First-Class Levers?
  3. What Are Examples of Second-Class Levers?
  4. What Are Examples of Third-Class Levers?
  5. What Are Examples of Levers in the Body?
  6. Why Does a Longer Handle Make a Lever Easier to Use?
  7. Lever Examples for Kids
  8. Common Misconceptions
  9. Key Facts
  10. Quiz
  11. FAQ

How Do You Classify Examples of Levers?

Every lever has three key points: the fulcrum it turns on, the load it moves and the effort you apply. The class depends only on which of the three sits in the middle. Fulcrum in the middle makes a first-class lever, load in the middle makes a second-class lever, and effort in the middle makes a third-class lever.

A handy memory aid is "F-L-E, 1-2-3": the letter in the middle tells you the class. Our page on the classes of levers explains each arrangement in more depth.

The table lists all 18 examples on this page with their class and the position of each point.

Whatever its class, a lever is scored by how much force it delivers to the load compared with the force you supply.

MA=FoFi
What each symbol means
SymbolQuantitySI unit
MAmechanical advantagedimensionless (1)
Fooutput force (exerted on the load)newton (N)
Fiinput force (effort)newton (N)

Valid for: for a lever in equilibrium MA = l_i / l_o (input arm / output arm).

18 examples of levers with their class and what sits in the middle
ExampleClassIn the middleMain benefit
Seesaw1FulcrumBalance
Crowbar1FulcrumForce
Scissors1FulcrumForce
Pliers1FulcrumForce
Claw hammer1FulcrumForce
Neck nodding1FulcrumBalance
Wheelbarrow2LoadForce
Nutcracker2LoadForce
Bottle opener2LoadForce
Door on hinges2LoadForce
Rowing oar2LoadForce
Standing on tiptoe2LoadForce
Tweezers3EffortPrecision
Kitchen tongs3EffortReach
Broom3EffortSpeed
Fishing rod3EffortSpeed
Baseball bat3EffortSpeed
Forearm lifting a cup3EffortSpeed
Source: Classification by our editors · Retrieved October 2026

What Are Examples of First-Class Levers?

In a first-class lever the fulcrum sits between the effort and the load, so pushing down on one side lifts the other.

  1. Seesaw. The pivot is in the middle and each child is both effort and load in turn. A lighter child balances a heavier one by sitting farther out.
  2. Crowbar prying a nail. The bar rests on the board near the nail. A long handle on the far side gives a big gain in force.
  3. Scissors. Two first-class levers share one screw as their fulcrum. Cutting thick card near the screw is easier because the load arm is short.
  4. Pliers. Like scissors, the jaws grip close to the pivot while your hand squeezes far from it.
  5. Claw hammer pulling a nail. The head rocks on the wood as a fulcrum, and the long handle lifts the nail with a large force.
  6. Your neck nodding. The top of your spine is the fulcrum, the weight of your face is the load and the neck muscles at the back pull down as the effort.

What Are Examples of Second-Class Levers?

In a second-class lever the load sits between the fulcrum and the effort. Because the effort arm is always longer than the load arm, these levers always multiply force.

  1. Wheelbarrow. The wheel axle is the fulcrum, the soil sits in the middle and you lift at the handles. The worked example below puts numbers on it.
  2. Nutcracker. The hinge is at one end, the nut sits in the middle and you squeeze the far ends of the handles.
  3. Bottle opener. The top edge of the cap acts as the fulcrum. The opener's lip catches under the cap in the middle while you lift the handle.
  4. Door on its hinges. The hinges are the fulcrum, the door's own weight and stiffness act in the middle and your push at the handle side is the effort.
  5. Oar in a rowboat. Physicists often model the blade in the water as the fulcrum, the boat as the load at the oarlock and your hands as the effort.
  6. Standing on tiptoe. The ball of your foot is the fulcrum, your body weight acts through the ankle and the calf muscle lifts at the heel.

Example 1 Lifting a loaded wheelbarrow

A gardener's wheelbarrow carries soil weighing 720 N. The center of the load is 0.30 m from the wheel axle, and the gardener lifts the handles 1.2 m from the axle. Ignoring the barrow's own weight, what upward force must the gardener apply?

  1. Given:
    • output force (exerted on the load): Fo=720 N
    • d_L: dL=0.3 m
    • d_E: dE=1.2 m
  2. Formula: Fi=FodLdE
  3. Substitute: Fo=720 N,dL=0.3 m,dE=1.2 m
  4. Answer: Fi=180 N

Moving the load closer to the wheel shortens the load arm and lowers the effort even more.

Second-class lever diagram of a wheelbarrow: 720 N load 0.3 m from the fulcrum balanced by 180 N effort 1.2 m away
With the load four times closer to the wheel than the handles, the lift needs a quarter of the load's weight.

What Are Examples of Third-Class Levers?

In a third-class lever the effort sits between the fulcrum and the load. The effort arm is shorter than the load arm, so the mechanical advantage is less than 1. You push harder than the load, but the far end moves faster and farther.

  1. Tweezers. The joined end is the fulcrum, your fingers press in the middle and the tips hold the splinter.
  2. Kitchen tongs. The same layout as tweezers, scaled up for food.
  3. Broom. Your top hand stays still as the fulcrum, your lower hand pushes and the bristles sweep in a wide arc.
  4. Fishing rod. The hand at the base is the fulcrum, the other hand lifts a little way up and the tip flicks the line far out.
  5. Baseball bat. Your hands near the knob drive the bat, and the far end moves much faster than your hands to strike the ball.
  6. Your forearm lifting a cup. The elbow is the fulcrum, the biceps pulls a few centimeters from the elbow and the cup sits in your hand.

Speed, not force, is the payoff. That is why sports equipment and animal limbs so often use this class.

Example 2 Mechanical advantage of a pair of tongs

A cook squeezes kitchen tongs 0.08 m from the hinge, and the tips grip a corn cob 0.24 m from the hinge. What is the ideal mechanical advantage of the tongs?

  1. Given:
    • d_E: dE=0.08 m
    • d_L: dL=0.24 m
  2. Formula: MA=dEdL
  3. Substitute: dE=0.08 m,dL=0.24 m
  4. Answer: MA=0.3333

A value below 1 is normal for third-class levers: you squeeze harder, but the tips move farther and faster.

What Are Examples of Levers in the Body?

Your skeleton is a set of levers. Bones are the rigid bars, joints are the fulcrums and muscles supply the effort by pulling on tendons. Nodding your head uses a first-class lever, rising onto your toes uses a second-class lever and bending your elbow uses a third-class lever.

Most limb levers are third class. The biceps attaches close to the elbow, so it must pull with several times the weight of the object in your hand. In return, a small shortening of the muscle swings your hand through a large arc very quickly. The same idea explains why a pitcher's arm can throw so fast. Our page on torque shows how to calculate the turning effect at each joint.

Side view of a human arm holding a mug with the biceps and elbow joint highlighted
The elbow is the fulcrum and the biceps pulls close to it, a classic third-class lever.

Why Does a Longer Handle Make a Lever Easier to Use?

A lever balances when the turning effects on both sides match: effort times its distance from the fulcrum equals load times its distance. Doubling the effort arm halves the effort needed. That rule, first worked out by Archimedes, is the reason crowbars and wrenches have long handles.

The gain in force comes with a cost in distance. Your hand must travel farther than the load does, so the work you do is never less than the work done on the load. Try your own numbers in the mechanical advantage calculator.

Lever Examples for Kids

Kids can build a lever with a ruler and a pencil. Lay the ruler across the pencil, put a small toy on one end and press the other end. Then slide the pencil closer to the toy and press again. The closer the fulcrum is to the load, the easier the lift.

Other kid-friendly levers are the seesaw, a spoon prying a paint-can lid and a pair of salad tongs. See our levers for kids page and practice sorting levers with the levers worksheets.

Common Misconceptions

Myth: Every lever makes a job easier by reducing the force.

Physics: Third-class levers need more effort than the load. They are useful because they increase speed and distance at the far end.

Myth: The fulcrum is always in the middle of a lever.

Physics: Only first-class levers have the fulcrum in the middle. In second- and third-class levers it sits at one end.

Myth: A lever saves work.

Physics: A lever trades force for distance. The work in is the same as the work out, apart from a little lost to friction at the pivot.

Key Facts

  • A lever is a rigid bar that turns on a fixed point called the fulcrum.
  • The class of a lever depends on whether the fulcrum, load or effort is in the middle.
  • Second-class levers always multiply force, because the effort arm is longer than the load arm.
  • Third-class levers have a mechanical advantage below 1 but give speed and range of motion.
  • Most levers in the human body, such as the elbow, are third-class levers.
  • A lever balances when effort times effort arm equals load times load arm.
  • A longer handle reduces the force needed but increases the distance your hand moves.
Did you know? When you hold a cup in your hand with your forearm level, your biceps pulls with roughly eight to ten times the weight of the cup, because it attaches only a few centimeters from the elbow.

Quick Quiz: How Well Do You Know Examples of Levers?

6 questions. Tap an answer to check it.

  1. Which part of a second-class lever is in the middle?

  2. A pair of tweezers is which class of lever?

  3. Which example is a first-class lever?

  4. Your elbow and biceps lifting a cup form which class of lever?

  5. What happens to the effort if you double the length of a crowbar's handle?

  6. Why do third-class levers have a mechanical advantage below 1?

Frequently Asked Questions

What are 3 examples of levers?

One example from each class is a seesaw, a wheelbarrow and a pair of tweezers. The seesaw has its fulcrum in the middle (first class), the wheelbarrow has its load in the middle (second class) and the tweezers have the effort in the middle (third class). All three turn around a fixed pivot.

What are examples of levers and their classes?

First-class levers include seesaws, crowbars, scissors and pliers. Second-class levers include wheelbarrows, nutcrackers and bottle openers. Third-class levers include tweezers, tongs, brooms, fishing rods and baseball bats. The class depends on whether the fulcrum, the load or the effort sits between the other two points.

What are examples of levers in everyday life?

Everyday levers include door handles, light switches, stapler arms, can-tab pull rings, car pedals, scissors, tongs and hammers. Even a spoon used to pry open a tin lid is a lever. Each one turns around a pivot so that a push in one place causes a useful motion somewhere else.

What are examples of levers in the body?

Nodding your head is a first-class lever with the fulcrum at the top of the spine. Standing on tiptoe is a second-class lever with the fulcrum at the ball of the foot. Bending the elbow to lift something is a third-class lever, with the biceps pulling between the elbow and the hand.

Is a wheelbarrow a lever?

Yes, a wheelbarrow is a second-class lever. The wheel axle is the fulcrum, the load sits in the tray in the middle and you lift at the handles. Because the handles are farther from the axle than the load is, you lift with less force than the weight of the load.

Are scissors a first-class lever?

Yes. Scissors are two first-class levers joined at a single pivot screw, which is the fulcrum. Your fingers push on the handles on one side and the blades cut on the other side. Cutting near the pivot gives the biggest force, which is why thick material is easier to cut close to the screw.

Why are third-class levers useful if they need more force?

Third-class levers give up force to gain speed and range of motion. A small movement of the effort point makes the far end swing a long way very quickly. That makes them ideal for throwing, swinging a bat, sweeping with a broom or gently gripping small objects with tweezers.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.