
At a Glance
Torque is the turning effect of a force about a pivot, given by τ = r F sin θ and measured in newton meters (N·m). Examples include opening a door, loosening a bolt with a wrench, turning a steering wheel, opening a jar, pedaling a bike, a seesaw and your biceps bending your elbow.
- Symbol
- τ (tau)
- Formula
- τ = r F sin θ
- SI unit
- newton meter (N·m)
- Scalar or vector
- Vector (clockwise or counterclockwise)
- Biggest when
- Force is at 90° to the arm, far from the pivot
- Zero when
- Force points straight at the pivot
On this page
How Do You Spot Torque in Everyday Life?
Look for three things: a pivot, an arm and a force that is not aimed at the pivot. Wherever something rotates, twists or swings around a fixed point, a torque is at work. Our main page on torque explains the idea in full.
The distance from the pivot is the key. That distance, measured square to the force, is called the lever arm. Doubling it doubles the torque, which is why handles sit at the far edge of doors and why long wrenches loosen stubborn bolts.
The table lists all 16 examples with a pivot and a typical torque worked out from realistic distances and forces.
Every example below uses the same rule: torque grows with the force, with the distance from the pivot and with how square the force is to the arm.
| Symbol | Quantity | SI unit |
|---|---|---|
| torque | newton meter (N·m) | |
| distance from pivot to point where force acts | meter (m) | |
| magnitude of the force | newton (N) | |
| angle between r and F | radian (rad) |
Valid for: r sin θ is the lever arm (perpendicular distance); N·m of torque is not written as J.
| Example | Pivot | Typical distance and force | Torque (N·m) |
|---|---|---|---|
| Pushing a door at the handle | Hinges | 0.8 m, 20 N | 16 |
| Pushing a door near the hinges | Hinges | 0.1 m, 20 N | 2 |
| Opening a jar | Center of lid | 0.04 m, 50 N | 2 |
| Turning a faucet handle | Spindle | 0.05 m, 15 N | 0.75 |
| Bottle opener | Edge of cap | 0.08 m, 40 N | 3.2 |
| Wrench on a wheel nut | Bolt | 0.25 m, 120 N | 30 |
| Screwdriver | Shaft | 0.015 m, 60 N | 0.9 |
| Steering wheel | Steering column | 0.19 m, 30 N | 5.7 |
| Car engine | Crankshaft | Varies | Rated by maker |
| Electric drill | Chuck | Varies | Set by clutch |
| Bicycle pedal | Crank axle | 0.17 m, 500 N | 85 |
| Seesaw | Middle support | 2 m, 300 N | 600 |
| Swinging a bat | Hands | Varies | Varies |
| Biceps bending the elbow | Elbow | 0.04 m, 600 N | 24 |
| Standing on tiptoe | Ball of the foot | Varies | Varies |
| Holding the head level | Top of the spine | Varies | Varies |
| Source: Computed with τ = rF sin θ at θ = 90° · distances and forces are typical values · Retrieved October 2026 | |||
What Are Examples of Torque at Home?
- Opening a door. The hinges are the pivot. Pushing at the handle, far from the hinges, gives plenty of torque with a light push.
- Pushing a door near its hinges. The same push close to the hinges barely moves the door, because the lever arm is tiny.
- Opening a jar. Your hand grips the rim and twists. A wider lid is easier to open because your grip acts farther from the center.
- Turning a faucet or doorknob. A lever-style handle reaches farther from the spindle than a round knob, so it needs less force.
- Using a bottle opener. The opener hooks under the cap, and lifting the long handle creates a large torque on the edge of the cap.
Notice that none of these jobs needs great strength. Designers of handles, knobs and openers simply place the grip as far from the pivot as the object allows, so an ordinary hand can do the turning.
How Do Tools and Machines Use Torque?
- Wrench on a bolt. The bolt is the pivot and the handle is the arm. Mechanics use a torque wrench to tighten bolts to an exact value in N·m.
- Screwdriver. A thick handle lets your fingers push farther from the shaft, so a fat screwdriver turns tight screws more easily than a thin one.
- Steering wheel. Your hands sit on the rim, well away from the steering column, so modest effort turns the wheels.
- Car engine. Pistons push on a crankshaft to spin it; engine torque is quoted in N·m or pound-feet.
- Electric drill. The motor twists the chuck; a clutch setting limits the torque so screws are not driven too deep.
Many tools are really levers or a wheel and axle in disguise. The torque calculator works out the turning effect for any distance, force and angle.
Example 1 Loosening a wheel nut
A driver pushes down with 120 N on the end of a wrench 0.25 m long, at 90° to the handle. What torque does she put on the wheel nut?
- Given:
- distance from pivot to point where force acts:
- magnitude of the force:
- angle between r and F:
- distance from pivot to point where force acts:
- Formula:
- Substitute:
- Answer:
A longer wrench, or a pipe slipped over the handle, raises the torque without any extra effort.
Example 2 The same push at an awkward angle
Now the driver can only push at 45° to the same 0.25 m wrench, still with 120 N. What torque does she apply?
- Given:
- distance from pivot to point where force acts:
- magnitude of the force:
- angle between r and F:
- distance from pivot to point where force acts:
- Formula:
- Substitute:
- Answer:
Only the part of the force square to the handle turns the nut, so the torque drops by about 30 percent.
What Are Examples of Torque in Sports and on Wheels?
- Pedaling a bicycle. Your foot pushes on the pedal at the end of the crank arm. The push works best when the crank is level, at 90° to your leg's push.
- A seesaw. Two children balance when their torques about the middle are equal. A lighter child can balance a heavier one by sitting farther out.
- Swinging a bat or racket. Your wrists and arms apply torque to start the swing, turning the bat around your hands.
The seesaw is the classic case of balanced torques, the idea behind static equilibrium. For more on beams and pivots, see our lever examples.

What Are Examples of Torque in the Human Body?
- Bending your elbow. The elbow is the pivot and the biceps attaches only a few centimeters away. Because its lever arm is so short, the muscle must pull far harder than the weight in your hand.
- Standing on tiptoe. Your calf muscle pulls up on the heel, turning the foot around the ball of the foot.
- Nodding your head. Neck muscles at the back of the skull hold your head level, balancing the torque from its weight, which sits slightly in front of the spine.
The body trades force for speed: short lever arms need big muscle forces, but they let the hand or foot move quickly through a wide arc. Your joints and muscles behave much like the three classes of levers.

Torque Explained Simply
Torque is a twist. A push straight at a door's hinges does nothing, but the same push at the handle swings the door open. Where you push matters as much as how hard.
Try it: push a door closed with one finger at the handle, then with one finger near the hinges. Feel how much harder the second push is. For practice problems with answer keys, use our torque worksheets.
Common Misconceptions
Myth: Torque is just another word for force.
Physics: Torque depends on force and on where the force acts. A large force through the pivot gives zero torque.
Myth: Pushing harder is the only way to turn something more easily.
Physics: Pushing farther from the pivot, or more squarely to the arm, also raises the torque without extra effort.
Myth: Torque and work are the same because both use N·m.
Physics: Work is energy transferred along a displacement and is a scalar measured in joules. Torque is a turning effect with a direction.
Key Facts
- Torque is the turning effect of a force about a pivot.
- Torque equals distance from the pivot times force times the sine of the angle between them: τ = rF sin θ.
- The SI unit of torque is the newton meter, N·m.
- A force aimed straight at the pivot produces no torque at all.
- Pushing farther from the pivot gives more torque for the same effort.
- A seesaw balances when the clockwise and counterclockwise torques are equal.
- Muscles attach close to joints, so they must pull with large forces to create everyday torques.
Quick Quiz: How Well Do You Know Examples of Torque?
6 questions. Tap an answer to check it.
Where should you push a door to open it most easily?
The longest lever arm gives the most torque for the same push.
What is the SI unit of torque?
Torque is force times distance, written N·m.
A force points straight at the pivot. What torque does it make?
With no lever arm, the force cannot turn the object.
A light child balances a heavy child on a seesaw. Where does the light child sit?
A smaller force needs a longer lever arm to give an equal torque.
Which is an example of torque in the human body?
The biceps pulls the forearm around the elbow joint.
Why does a long wrench loosen a tight bolt more easily?
More distance from the pivot gives more torque for the same force.
Frequently Asked Questions
What are 5 examples of torque?
Five common examples are opening a door, loosening a bolt with a wrench, turning a steering wheel, pedaling a bicycle and opening a jar lid. In every one, a force acts at some distance from a pivot or axis and makes an object turn around it.
What are examples of torque in everyday life?
At home, torque turns doors, faucets, doorknobs, jar lids and bottle openers. On the road, it turns steering wheels, bicycle cranks and car wheels. In the workshop, wrenches, screwdrivers and drills all use torque. Even a playground seesaw is a lesson in balancing torques.
What are examples of torque in the human body?
Your biceps creates torque around the elbow when you lift a cup, your calf muscle creates torque around the ankle when you rise onto your toes, and your neck muscles create torque to keep your head from tipping forward. Your quadriceps also produce torque around the knee when you kick a ball.
Why is a door handle placed far from the hinges?
Torque grows with distance from the pivot. Placing the handle at the edge opposite the hinges gives the longest possible lever arm, so a gentle push creates enough torque to swing the door. The same push near the hinges would create only a small fraction of that turning effect.
Is torque a vector?
Yes, torque is a vector. Its direction tells you which way the object tends to turn, clockwise or counterclockwise, and in three dimensions it is drawn along the axis of rotation using the right-hand rule. Its size is the number of newton meters.
How do you increase torque without pushing harder?
Push farther from the pivot, for example by using a longer wrench, or push at 90° to the arm instead of at a slant. Both raise the torque while your force stays the same. Gears can also multiply torque by trading rotation speed for turning force.
What is the difference between torque and force?
A force is a push or pull, measured in newtons. Torque is the turning effect of that force about a pivot, measured in newton meters. A force can produce a big torque, a small torque or none at all, depending on where and in which direction it acts.








