Charge on the move

Electric Current

Electric current is the amount of charge that moves past a point in a circuit each second, equal to the charge that passes divided by the time it takes. It is measured in amperes, where one ampere means one coulomb of charge every second. Current is what lights a bulb, spins a motor and charges a phone, and it only flows around a closed loop.

Glowing light bulb wired to a battery on a workbench, showing electric current flowing through a filament
A steady flow of charge through a thin filament heats it until it glows.

At a Glance

Electric current is the amount of charge passing a point each second, found with I = ΔQ / Δt, where ΔQ is charge in coulombs and Δt is time in seconds. Its SI unit is the ampere (A), equal to one coulomb per second, and by convention it points from the positive terminal toward the negative one.

Symbol
I
SI unit
ampere (A), equal to 1 C/s
Formula
I = ΔQ / Δt
Scalar or vector
Scalar in circuits (it has a sense of direction along the wire, but adds like a number)
Depends on
Voltage driving the charge and the resistance in the path
Measured with
Ammeter connected in series
On this page
  1. What Is Electric Current?
  2. Electric Current Explained Simply
  3. What Is the Formula for Electric Current?
  4. What Is the Unit of Electric Current?
  5. Which Way Does Current Flow?
  6. How Fast Do Electrons Move in a Wire?
  7. What Is the Difference Between AC and DC?
  8. How Do You Measure Electric Current?
  9. How Does Current Behave in Series and Parallel Circuits?
  10. How Much Current Do Everyday Things Use?
  11. Why Is Current Dangerous to the Human Body?
  12. Practice Electric Current Problems
  13. Common Misconceptions
  14. Key Facts
  15. Quiz
  16. FAQ

What Is Electric Current?

Electric current is a flow of electric charge. In a copper wire the moving charges are electrons. In salt water and in the fluid inside a battery they are ions, and in a neon sign they are both. Whatever carries the charge, current tells you how much of it passes a chosen point every second.

A useful picture is a crowd moving through a gate. The current is not how many people exist in the stadium, and it is not how fast each one walks. It is the number of people who pass the gate per second. A wire full of electrons carries no current at all until something pushes them along together.

That push comes from a voltage, also called a potential difference. A battery or generator creates an electric field inside the wire, the field nudges every free charge in the same direction, and a steady current is set up around the loop. Remove the voltage, or break the loop, and the flow stops almost instantly.

Electric Current Explained Simply

Think of a circuit as a closed loop of pipe already full of water. A pump pushes the water around. The pump is the battery, the pipe is the wire, and the amount of water passing one spot each second is the current.

Two ideas follow from this picture. First, the water does not have to travel all the way from the pump to the far end before something happens, because the whole loop starts moving at once. Second, water is not used up as it goes around. The same is true of charge: a bulb uses the energy the charges carry, not the charges themselves, so the current coming out of a bulb equals the current going in.

If the loop is broken, for example by flipping a switch off, the flow stops everywhere in the loop at the same moment. That is why one switch can control a whole string of lights wired in a single path.

What Is the Formula for Electric Current?

The average current through a point is I=ΔQΔt, where ΔQ is the charge that passes in coulombs and Δt is the time interval in seconds. The result comes out in amperes, because one ampere is defined as one coulomb per second.

You can turn the formula around to find charge, ΔQ=IΔt, or time, Δt=ΔQ/I. These forms are handy for battery questions, since battery capacity is really a store of charge.

In a real circuit you usually find current a different way: by dividing the voltage by the resistance with Ohm's law, I=V/R. To try that with your own numbers, use our Ohm's law calculator, which shows every step.

Here is the defining formula with each symbol and its SI unit, plus the rearranged forms for finding charge or time.

I=ΔQΔt
What each symbol means
SymbolQuantitySI unit
Icurrentampere (A)
ΔQcharge passing a pointcoulomb (C)
Δttime intervalsecond (s)

Rearranged to find another variable:

ΔQ=IΔtΔt=ΔQI

Valid for: conventional current direction is the flow of positive charge.

Example 1 Charge through a flashlight bulb

During a one-minute test, 180 C of charge passes through the filament of a flashlight bulb. What is the current in the bulb?

  1. Given:
    • charge passing a point: ΔQ=180 C
    • time interval: Δt=60 s
  2. Formula: I=ΔQΔt
  3. Substitute: ΔQ=180 C,Δt=60 s
  4. Answer: I=3 A

A few amperes is typical for a bright incandescent flashlight; a modern LED version draws far less.

What Is the Unit of Electric Current?

The SI unit of current is the ampere, usually shortened to amp and written A. It is one of the seven SI base units and is named after the French physicist André-Marie Ampère, who worked out how currents push and pull on each other.

Since 2019 the ampere has been defined by fixing the value of the elementary charge at exactly 1.602176634 × 10⁻¹⁹ C. One ampere therefore means that about 6.24 × 10¹⁸ elementary charges pass a point every second, a number we computed from that exact value. Smaller currents use milliamps (mA, thousandths of an amp) and microamps (µA, millionths).

Current is easy to confuse with voltage and power. Voltage is the push, current is the flow, and power is the rate of energy delivery. Our guide to volts vs amps vs watts sets the three side by side.

Which Way Does Current Flow?

By agreement, conventional current flows from the positive terminal of a source, through the circuit, and back into the negative terminal. Arrows on circuit diagrams always show this direction. The convention was settled long before anyone knew what actually moves inside a metal.

In metal wires the moving particles are electrons, which carry negative charge, so they drift the opposite way: from the negative terminal toward the positive one. Both descriptions give the same answers, because a negative charge moving left has the same electrical effect as a positive charge moving right.

In other materials the carriers differ. Positive ions and negative ions move in opposite directions in a battery's electrolyte, and in some semiconductors the current is carried by "holes", which behave like positive charges. Conventional current lets you ignore those details and treat every circuit the same way.

How Fast Do Electrons Move in a Wire?

Surprisingly slowly. Free electrons in a metal race around at random at very high speeds, but their overall drift along the wire is tiny. For a copper wire with a 1.5 mm² cross-section carrying 10 A, using a typical copper value of about 8.5 × 10²⁸ free electrons per cubic meter, we computed a drift speed of about 0.5 mm/s. At that pace an electron needs over half an hour to move one meter.

So why does a lamp light the instant you flip the switch? Because the electric field that pushes the electrons spreads through the wire at close to the speed of light. Every electron in the loop starts drifting at nearly the same moment, so the electrons already inside the lamp begin to carry current right away.

The link between drift speed and current is I=nqAvd: more carriers, bigger charge per carrier, a thicker wire or a faster drift all mean more current. Our drift velocity page works through that formula in detail.

What Is the Difference Between AC and DC?

Current comes in two main types. Direct current (DC) flows in one direction only, the way it does from a battery, a solar panel or a phone charger's output. Alternating current (AC) reverses direction many times per second, the way it does in household outlets.

In North America the mains supply reverses 120 times per second, a frequency of 60 Hz, while much of the rest of the world uses 50 Hz. AC is used for power grids mainly because transformers can raise and lower its voltage easily, which cuts energy losses on long transmission lines.

  • Direct current: steady, one-way flow; batteries, electronics, electric car packs.
  • Alternating current: flow that swings back and forth; wall outlets, the power grid, large motors.

For a full side-by-side comparison, read AC vs DC.

How Do You Measure Electric Current?

Current is measured with an ammeter, or with a multimeter set to its current range. The meter must be placed in series, meaning you break the circuit and let the current pass through the meter on its way around the loop. A good ammeter has a very small resistance so that it barely changes the current it is measuring.

Never connect an ammeter directly across a battery or an outlet. With almost no resistance in the path, a huge current would flow, blowing the meter's fuse or worse. Our page on ammeters and voltmeters explains the safe way to wire each one.

Electricians often use a clamp meter instead. Its jaws close around a single wire and sense the magnetic field the current creates, so nothing has to be disconnected.

Example 2 How much charge does a fan motor move?

A small desk fan draws a steady current of 0.5 A for one hour (3,600 s). How much charge flows through its motor in that time?

  1. Given:
    • current: I=0.5 A
    • time interval: Δt=3,600 s
  2. Formula: ΔQ=IΔt
  3. Substitute: I=0.5 A,Δt=3,600 s
  4. Answer: ΔQ=1,800 C

That much charge is about 1.1 × 10²² electrons passing through the motor, a count computed from the exact elementary charge.

Parallel circuit with a 12 V battery and two resistors of 20 and 60 ohms, showing current splitting between the branches
At a junction the current divides, and the branch with less resistance carries the larger share.

How Does Current Behave in Series and Parallel Circuits?

In a series circuit there is only one path, so the same current passes through every component. Add another bulb in series and the total resistance rises, so the current through all of the bulbs drops and they glow more dimly.

In a parallel circuit the current splits at each junction and the branches add back together where they rejoin. A branch with lower resistance takes a bigger share. This is the rule that Kirchhoff's junction law expresses: the current flowing into a junction equals the current flowing out, because charge cannot pile up or vanish.

The diagram below shows a single loop where one current runs through every part. Our series vs parallel circuits comparison covers both layouts in depth.

Series circuit with a 9 V battery, closed switch, ammeter and 30 ohm bulb, with arrows showing conventional current around the loop
In a single loop the same current passes through the switch, the ammeter and the bulb.

How Much Current Do Everyday Things Use?

Currents in daily life span a huge range. A small indicator LED runs on about 20 mA. A phone charging cable usually carries 1 to 3 A. A kettle or hair dryer on a 120 V outlet pulls more than 10 A, which is why such appliances can trip a breaker when two of them share one circuit.

At the extremes, the signals in a nerve cell involve tiny currents of order microamps or less, while a typical lightning stroke peaks at tens of thousands of amperes for a few millionths of a second. The table below converts a range of currents into the number of electrons that pass a point each second.

Example 3 Charging time for a phone battery

A phone battery needs 10,800 C of charge to go from empty to full. If the charger delivers a steady 2 A, how long does a full charge take in seconds?

  1. Given:
    • charge passing a point: ΔQ=10,800 C
    • current: I=2 A
  2. Formula: Δt=ΔQI
  3. Substitute: ΔQ=10,800 C,I=2 A
  4. Answer: Δt=5,400 s

That is an hour and a half; real phones slow the current near the top of the charge, so the true time is a bit longer.

How many electrons pass a point each second at different currents
CurrentTypical exampleElectrons per second
1 µAVery small sensor signal6.24 × 10¹²
1 mAThreshold of feeling through the skin6.24 × 10¹⁵
20 mAIndicator LED1.25 × 10¹⁷
0.5 ASmall desk fan3.12 × 10¹⁸
1 ASlow phone charger6.24 × 10¹⁸
10 AMicrowave oven on 120 V6.24 × 10¹⁹
30,000 ALightning stroke (peak)1.87 × 10²³
Source: Computed with N = I / e using the exact elementary charge e = 1.602176634 × 10⁻¹⁹ C (NIST CODATA 2022); example currents are typical values · Retrieved October 2026
Lightning bolt striking open prairie at night, an example of an enormous but very brief electric current
A lightning stroke carries tens of thousands of amperes, but only for a tiny fraction of a second.

Why Is Current Dangerous to the Human Body?

It is the current through the body, not the voltage on its own, that causes harm. Voltage matters because it drives the current, but dry skin has a high resistance that limits the flow. Wet skin, broken skin or a firm grip on a metal object lowers that resistance and lets far more current through.

As a rough guide, a current of about 1 mA through the body is just noticeable, around 10 mA can make muscles lock so a person cannot let go, and currents near 100 mA crossing the chest can disturb the heartbeat. Ground-fault outlets in kitchens and bathrooms are designed to cut the power when they sense a leak of only a few milliamps. Read more in our guide to electrical safety and electric shock.

Practice Electric Current Problems

Short, repeated practice is the quickest way to become comfortable with current, charge and time. Our electricity worksheets include printable problem sets with answer keys, and the Ohm's law worksheets add voltage and resistance to the mix. Then test yourself with the quiz below.

Common Misconceptions

Myth: A battery stores current and uses it up.

Physics: A battery stores chemical energy and supplies a push. The charges circulate around the loop and are not consumed; the energy they carry is what gets used.

Myth: Current gets weaker after passing through each bulb.

Physics: In a series loop the current is identical everywhere. Energy is transferred in each bulb, but the flow of charge into a bulb equals the flow out.

Myth: Electrons shoot through the wire at nearly the speed of light.

Physics: The electrons drift very slowly, often well under a millimeter per second. It is the electric field driving them that sets up almost instantly.

Myth: High voltage alone is what kills.

Physics: Harm comes from current through the body. Voltage matters because, together with the body's resistance, it decides how large that current becomes.

Key Facts

  • Current tells you how much charge passes a point per second, found with I = ΔQ / Δt.
  • The SI unit of current is the ampere, equal to one coulomb of charge per second.
  • Conventional current flows from positive to negative, while electrons in a metal drift the opposite way.
  • Electrons in a wire drift at only a fraction of a millimeter per second, yet the push that moves them spreads almost at light speed.
  • Current only flows around a closed loop, and it is the same at every point in a single series path.
  • Direct current flows one way; alternating current reverses direction many times per second.
  • An ammeter measures current and must always be connected in series.
Did you know? Since 2019 the ampere has not depended on any physical object or force experiment. It is fixed by an exact value of the elementary charge, so in principle you could build a perfect ammeter by counting single electrons as they pass.

Quick Quiz: How Well Do You Know Electric Current?

6 questions. Tap an answer to check it.

  1. Which formula defines electric current?

  2. One ampere is equal to which of these?

  3. In which direction does conventional current flow outside a battery?

  4. Three bulbs are wired in a single series loop. How do the currents through them compare?

  5. How must an ammeter be connected to measure the current in a lamp?

  6. Why does a lamp light almost instantly even though electrons drift slowly?

Frequently Asked Questions

What is electric current in simple words?

Electric current is the flow of electric charge through a material, usually electrons moving through a metal wire. It tells you how much charge passes one spot every second. A bigger current means more charge going by each second, which can make a bulb brighter or a motor spin harder. Current only flows when there is a complete loop and something, like a battery, pushes the charges.

What is the SI unit of electric current?

Current is measured in amperes, written A and often called amps. One ampere equals one coulomb of charge passing a point every second. Smaller currents are given in milliamps (mA) and microamps (µA). The ampere is one of the seven SI base units and is defined through the exact value of the elementary charge.

What is the formula for electric current?

The defining formula is I = ΔQ / Δt, where I is current in amperes, ΔQ is the charge that passes in coulombs and Δt is the time in seconds. In circuit problems you more often use Ohm's law, I = V / R, which finds current from the voltage across a component and its resistance. Both give the answer in amperes when you use SI units.

Is electric current a scalar or a vector?

Current in a wire is treated as a scalar. It has a sense of direction along the wire, shown by an arrow, but currents meeting at a junction simply add or subtract as numbers rather than combining like vectors. The related quantity current density, which describes flow through each square meter of a surface, is a true vector with a direction in space.

What is the difference between current and voltage?

Voltage is the push that drives charge around a circuit, measured in volts. Current is the resulting flow of charge, measured in amperes. A battery provides a fixed voltage; how much current flows then depends on the resistance of whatever is connected. A high voltage across a large resistance can give a small current, while a low voltage across a tiny resistance can give a large one.

Why do electrons flow opposite to conventional current?

Conventional current was defined as positive charge moving from the positive terminal to the negative terminal before the electron was discovered. Electrons turned out to carry negative charge, so they move the other way. A negative charge moving one direction has exactly the same electrical effect as a positive charge moving the opposite direction, so the old convention still works and is kept on every circuit diagram.

What are the two types of electric current?

The two main types are direct current and alternating current. Direct current flows steadily in one direction, as it does from batteries, solar cells and the output of phone chargers. Alternating current reverses direction many times per second, 60 times each way in North America, and is what household outlets and the power grid provide. Many devices convert AC from the wall into DC internally.

How much current can kill a person?

Currents of roughly 100 mA passing through the chest can disturb the rhythm of the heart and are potentially deadly, and even about 10 mA can make muscles lock so a person cannot let go of a live wire. These are rough figures that vary with the path through the body and the duration. That is why safety devices cut the power when they detect leaks of only a few milliamps.

How is current measured in a circuit?

Current is measured with an ammeter or a multimeter on its current setting, connected in series so the current flows through the meter. The meter has a very low resistance so it hardly disturbs the circuit. Clamp meters are an alternative that measure current by sensing the magnetic field around a wire, which means the circuit does not need to be opened.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.