
At a Glance
A parallel circuit connects components on separate branches across the same two points, so every branch has the same voltage. The branch currents add to give the total current, and the equivalent resistance follows 1/Rp = 1/R1 + 1/R2 + 1/R3, which is always smaller than the smallest branch resistance.
- Voltage
- The same across every branch
- Current
- Splits between branches; Itotal = I1 + I2 + I3
- Resistance
- 1/Rp = 1/R1 + 1/R2 + 1/R3
- Total resistance
- Smaller than the smallest branch
- If one branch breaks
- The other branches keep working
- Common use
- Home wiring, car lights, outlets
On this page
- What Is a Parallel Circuit?
- Parallel Circuits Explained Simply
- What Are the Rules of a Parallel Circuit?
- What Is the Formula for Resistance in a Parallel Circuit?
- How Does Current Divide in a Parallel Circuit?
- How Is a Parallel Circuit Different From a Series Circuit?
- Where Are Parallel Circuits Used in Everyday Life?
- What Are the Advantages and Disadvantages of Parallel Circuits?
- How Can You Build and Test a Parallel Circuit?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Parallel Circuit?
A parallel circuit is any arrangement where the current has more than one path to travel between the two terminals of the source. Each path is called a branch, and the points where the wires split and rejoin are called junctions or nodes. Every component on its own branch is connected directly across the supply.
That one fact drives all of the behavior. Because both ends of every branch touch the same two wires, each branch has exactly the same potential difference across it. A 12 V battery puts 12 V across the first lamp, 12 V across the second and 12 V across the third, no matter how many you add.
Compare this with a series circuit, where components sit one after another on a single loop and share the supply voltage. In parallel nothing is shared except the two connecting wires. If you are new to circuits in general, our page on the electric circuit covers the basic parts first.
Parallel Circuits Explained Simply
Imagine a highway that reaches a town and splits into three side streets before merging again on the far side. Cars can take any street they like. Opening a fourth street lets even more cars through per minute, and closing one street does not stop traffic on the others.
Electric charge behaves the same way at a junction. Some of it goes down each branch, and branches with less resistance carry more of it, just as a wide street carries more cars than a narrow lane. The total flow is simply the sum of what each street carries.
The "height" that the charge drops through is the same on every street, because they all start and end at the same place. In electrical terms, that height is the voltage, and it is why every appliance in a home gets the same voltage from the wall.
What Are the Rules of a Parallel Circuit?
Three rules describe every parallel circuit with ordinary resistive parts:
- Voltage is the same on every branch.
, ignoring the tiny resistance of the connecting wires. - Currents add. The current leaving the source equals the sum of the branch currents,
. This is the junction rule of Kirchhoff's laws, and it holds because charge is never created or lost at a junction. - Resistance combines through reciprocals. One over the equivalent resistance equals the sum of one over each branch resistance, so the total is always less than the smallest branch.
The table below shows what happens when identical 24 Ω lamps are added one at a time across a 12 V supply. Each lamp always draws the same current and glows equally brightly, while the battery has to deliver more and more current in total.
| Lamps in parallel | Equivalent resistance (Ω) | Current per lamp (A) | Total current (A) | Total power (W) |
|---|---|---|---|---|
| 1 | 24.0 | 0.50 | 0.50 | 6.0 |
| 2 | 12.0 | 0.50 | 1.00 | 12.0 |
| 3 | 8.0 | 0.50 | 1.50 | 18.0 |
| 4 | 6.0 | 0.50 | 2.00 | 24.0 |
| 5 | 4.8 | 0.50 | 2.50 | 30.0 |
| Source: Computed with 1/Rp = n/R, I = V/R and P = IV for an ideal 12 V supply · Retrieved October 2026 | ||||
What Is the Formula for Resistance in a Parallel Circuit?
The equivalent resistance of branches in parallel is found with
Why does adding a resistor make the total smaller? Each new branch is an extra path, so the circuit as a whole lets more current through for the same voltage. More current at the same voltage means a lower resistance, by Ohm's law. Two equal resistors in parallel give exactly half the value of one, and n equal resistors give one n-th.
For a full treatment of both combination rules, with mixed networks and a short derivation, see resistors in series and parallel. To skip the arithmetic, our series and parallel resistor calculator handles any number of branches.
This is the reciprocal rule for any number of branches, with each symbol and its SI unit, plus the shortcut for exactly two resistors.
| Symbol | Quantity | SI unit |
|---|---|---|
| equivalent parallel resistance | ohm (Ω) | |
| resistance 1 | ohm (Ω) | |
| resistance 2 | ohm (Ω) | |
| resistance 3 | ohm (Ω) |
Rearranged to find another variable:
Valid for: same voltage across each; R_p is smaller than the smallest resistor.
Example 2 Equivalent resistance of three branches
Find the single resistance that could replace the 6 Ω, 12 Ω and 24 Ω branches of the same circuit without changing the current drawn from the battery.
- Given:
- resistance 1:
- resistance 2:
- resistance 3:
- resistance 1:
- Formula:
- Substitute:
- Answer:
The result is below 6 Ω, the smallest branch, which is the quickest way to check a parallel answer.
How Does Current Divide in a Parallel Circuit?
Current divides in inverse proportion to resistance. Since each branch has the full supply voltage, the current in any one branch is just
Take a 12 V battery with branches of 6 Ω, 12 Ω and 24 Ω, as in the diagram. The 6 Ω branch carries the largest share, the 24 Ω branch the smallest, and the three add up to the current leaving the battery. An ammeter placed in the main wire, before the first junction, reads that total.
A useful habit is to solve each branch separately and only then add. This avoids the common mistake of dividing the supply voltage between branches, which only happens in series.
Example 1 Current through one branch
A 12 V battery feeds three parallel branches with resistances of 6 Ω, 12 Ω and 24 Ω. What current flows through the 6 Ω branch?
- Given:
- voltage across the resistor:
- resistance:
- voltage across the resistor:
- Formula:
- Substitute:
- Answer:
Each branch is handled on its own with Ohm's law, because each one has the full 12 V across it.

How Is a Parallel Circuit Different From a Series Circuit?
In series, the same current flows through every part and the voltages add up to the supply. In parallel, the same voltage sits across every part and the currents add up to the total. Adding a part in series raises the total resistance, while adding a branch in parallel lowers it.
The practical difference shows up when something fails. Pull one bulb out of a series string and every bulb goes dark, because the only path is broken. Pull one bulb out of a parallel set and the rest stay lit, because each has its own path back to the source.
Our series vs parallel circuits comparison lines the two up in a full table, with diagrams and a short quiz on telling them apart.
Where Are Parallel Circuits Used in Everyday Life?
The wiring in a house is the biggest example. Every outlet and every light fitting on a circuit is connected in parallel between the live and neutral wires, so each device receives the full mains voltage and can be switched on or off without affecting the others. In the United States that voltage is about 120 V; in much of the world it is about 230 V.
Car headlights, the lamps in a ceiling fixture with several bulbs, and the cells in some battery packs are also wired in parallel. A laptop charger and a phone charger on the same power strip are two more branches. You can find a longer list in our series and parallel circuit examples.
Because branch currents add, plugging in too many high-power appliances can push the total current in the wall wiring past a safe limit. That is the job of fuses and circuit breakers: they sit in the main line, not in a branch, and cut the whole circuit when the total gets too large.
Example 3 Power drawn by a kettle on its own branch
An electric kettle plugged into a 120 V kitchen outlet draws a current of 12.5 A. How much power does that branch use?
- Given:
- current:
- voltage:
- current:
- Formula:
- Substitute:
- Answer:
Every outlet on the circuit gets the same 120 V, so the kettle works the same whether or not the toaster is on, but the currents add in the wall wiring.

What Are the Advantages and Disadvantages of Parallel Circuits?
The advantages are why parallel wiring is used almost everywhere power is distributed:
- Each device gets the full supply voltage, so it works at its designed brightness or power.
- A broken or switched-off branch leaves the others running.
- Each branch can have its own switch.
- Devices can be added or removed without rewiring the rest.
There are trade-offs too. Every extra branch increases the total current, which drains a battery faster and heats the main wires more. A branch with almost zero resistance, such as a damaged cable, can draw a huge current and create a short circuit across the whole supply. Parallel wiring also uses more wire than a single series loop.

How Can You Build and Test a Parallel Circuit?
A battery holder, two or three small bulbs or resistors, some leads and a multimeter are enough. Connect one end of every bulb to the positive terminal and the other end of every bulb to the negative terminal. Then measure the voltage across each bulb: the readings should all match the battery.
Next, place the meter in current mode in each branch in turn, and finally in the main wire. The branch readings should add up to the main reading, within the meter's accuracy. Unscrew one bulb and watch the others stay lit while the main current drops.
Our series and parallel circuits lab walks through this with a data table, and the series and parallel circuits worksheets give printable practice with answer keys.
Common Misconceptions
Myth: The supply voltage is divided between the branches of a parallel circuit.
Physics: Each branch gets the full supply voltage. It is the current, not the voltage, that is shared between branches.
Myth: Adding more resistors in parallel increases the total resistance.
Physics: Each new branch is an extra path for charge, so the equivalent resistance goes down and the total current goes up.
Myth: Current takes only the path of least resistance.
Physics: Current flows through every branch. The branch with less resistance simply carries a larger share.
Myth: Bulbs in parallel get dimmer as you add more of them.
Physics: With an ideal supply each bulb keeps the same voltage and brightness. A real battery may sag slightly because of its internal resistance.
Key Facts
- A parallel circuit has two or more branches connected across the same two points of the supply.
- Every branch of a parallel circuit has the same voltage, equal to the supply voltage.
- The total current equals the sum of the branch currents, I = I1 + I2 + I3.
- Equivalent resistance follows 1/Rp = 1/R1 + 1/R2 + 1/R3 and is always smaller than the smallest branch.
- Adding a branch lowers the total resistance and increases the current drawn from the source.
- If one branch is broken or switched off, current keeps flowing in the other branches.
- Household outlets and lights are wired in parallel so each device gets the full mains voltage.
Quick Quiz: How Well Do You Know Parallel Circuits?
6 questions. Tap an answer to check it.
Three lamps are connected in parallel across a 6 V battery. What is the voltage across each lamp?
Every branch of a parallel circuit has the full supply voltage.
Two branches carry 0.4 A and 0.6 A. What current leaves the battery?
Branch currents add, so 0.4 A + 0.6 A gives 1.0 A.
Two 10 Ω resistors are connected in parallel. What is the equivalent resistance?
Two equal resistors in parallel give half of one, so 10 Ω becomes 5 Ω.
What happens to the total current when you add another branch to a parallel circuit?
The new branch lowers the equivalent resistance, so more current flows from the source.
Which branch of a parallel circuit carries the most current?
With equal voltage on every branch, I = V/R is largest where R is smallest.
Where should a fuse go to protect a whole parallel circuit?
Only the main wire carries the total current of all branches.
Frequently Asked Questions
What is a parallel circuit in simple terms?
A parallel circuit is one where the current can take more than one path. Each component sits on its own branch, connected directly across the battery or power supply. Because of that, every component gets the full voltage, and if one branch breaks, the others keep working. Home wiring is the most familiar example.
Is voltage the same in a parallel circuit?
Yes. Every branch of a parallel circuit is connected between the same two points, so the potential difference across each branch is the same and equals the supply voltage. A 9 V battery with three parallel resistors puts 9 V across each one. Only the wires, which have a tiny resistance, cause a very small difference in real circuits.
Is current the same in a parallel circuit?
No. Current splits at each junction and the branches usually carry different amounts. A branch with lower resistance carries more current, following I = V/R for that branch. The currents in all the branches add up to the total current leaving the source, which is what an ammeter in the main wire reads.
How do you calculate total resistance in a parallel circuit?
Add the reciprocals of the branch resistances, then take the reciprocal of that sum: 1/Rp = 1/R1 + 1/R2 + 1/R3. For two resistors you can use Rp = R1R2/(R1 + R2). For n identical resistors the total is R divided by n. The answer is always smaller than the smallest single branch.
Why are houses wired in parallel?
Parallel wiring gives every outlet and light the full mains voltage, so each appliance runs at its rated power. It also lets you switch one device on or off without affecting the rest, and a failed bulb does not black out the room. Series wiring would split the voltage and link every device together.
What happens if one bulb blows in a parallel circuit?
The other bulbs stay lit at the same brightness. A blown bulb opens only its own branch, while the remaining branches still connect both sides of the supply. The total current from the source drops by the amount that the broken bulb used to draw, and nothing else in the circuit changes.
Do batteries last longer in series or parallel circuits?
For the same set of bulbs, a parallel circuit drains the battery faster because each bulb draws its full current and the currents add. Series bulbs share the voltage, glow dimmer and draw less current in total. Connecting two identical batteries in parallel, rather than the bulbs, does extend running time at the same voltage.
Why does adding resistors in parallel decrease resistance?
Each new resistor in parallel opens another path between the same two points. With more paths, more charge can flow each second for the same voltage, so the total current rises. A larger current at the same voltage means a smaller equivalent resistance, which is exactly what the reciprocal formula predicts.








