
At a Glance
A solid is matter with a definite shape and a definite volume, because its atoms or molecules are locked close together and can only vibrate in place. Solids are either crystalline, with particles in a repeating pattern, or amorphous, with no long-range order. Their density is found with ρ = m / V.
- Shape
- Fixed, does not take the shape of its container
- Volume
- Fixed, very hard to compress
- Particle motion
- Vibrate about fixed positions
- Particle spacing
- Very close, touching neighbors
- Main types
- Crystalline and amorphous
- Key formula
- Density ρ = m / V (kg/m³)
On this page
- What Is a Solid?
- Solids Explained Simply
- What Are the Properties of Solids?
- What Are the Two Types of Solids?
- How Do You Find the Density of a Solid?
- How Do Solids Change State?
- Why Do Solids Expand When Heated?
- How Do Solids Respond to Forces?
- Why Do Sound and Heat Travel Well Through Solids?
- What Are Some Everyday Examples of Solids?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Solid?
A solid is one of the classic states of matter, along with liquids and gases. What sets it apart is that it holds its shape. Pour water into a bowl and it spreads to fill the bottom. Drop a pebble into the same bowl and it stays a pebble.
The reason lies in the particles. In a solid, atoms, ions or molecules sit so close together that they touch their neighbors, and strong forces between them act like stiff springs. Each particle can jiggle back and forth around one spot, but it cannot wander off. The whole structure therefore keeps a fixed shape and a fixed volume.
Most of the objects around you are solids: furniture, rocks, bones, coins, glass windows and the device you are reading this on. Even many things that seem soft, like butter or clay, are solids that happen to deform easily.
Solids Explained Simply
Imagine a packed stadium where every fan has an assigned seat. People can bounce, wave and shift in their seats, but nobody can swap places. That is a solid.
Now imagine the same crowd leaving the stadium, moving past one another while still close together. That is a liquid. Finally, picture the fans spread across a huge parking lot, running in all directions. That is a gas.
Heat a solid and its particles bounce harder in their seats. Heat it enough and they break free and start sliding around, which is melting. The particle model of matter uses this simple picture to explain all three states.
What Are the Properties of Solids?
- Definite shape: a solid keeps its shape unless a force bends, breaks or melts it.
- Definite volume: solids are nearly incompressible. Squeezing a steel block with huge force shrinks it by only a tiny fraction.
- High density: because particles are tightly packed, most solids are denser than their own liquid and far denser than their gas. Ice is a famous exception.
- No flow: solids do not pour. Sand and sugar seem to flow, but each grain is a tiny solid sliding past others.
- Slow diffusion: particles in a solid mix with neighboring material extremely slowly, over years rather than seconds.
- Elasticity and strength: solids push back when stretched or squeezed, a behavior described by Hooke's law, first stated by Robert Hooke.
What Are the Two Types of Solids?
Crystalline solids have particles arranged in a regular pattern that repeats in every direction, like tiles on a floor. Table salt, quartz, ice, diamond and nearly all metals are crystalline. Because the pattern is so regular, a crystalline solid melts at one sharp temperature, and it often breaks along flat faces. Our page on crystal structure describes the common patterns.
Amorphous solids have particles locked in place but scattered in a disordered way, like a frozen snapshot of a liquid. Window glass, most plastics, rubber and candle wax are amorphous. Instead of melting at a single point, they soften gradually over a range of temperatures, which is how a glassblower can shape hot glass.
Solids can also be grouped by how their particles are held together: metallic solids such as copper, ionic solids such as salt, covalent network solids such as diamond, and molecular solids such as sugar and ice.

How Do You Find the Density of a Solid?
Density tells you how much mass is packed into a given volume, using
Densities of solids vary enormously, from light woods that float easily to gold, which is more than nineteen times denser than water. Because each pure material has its own typical density, measuring it is a quick way to check what something is made of. The table lists some common values. For a full treatment see our density formula page, or try the density calculator.
Density, the mass packed into each cubic meter, is the property most often used to describe and identify a solid.
| Symbol | Quantity | SI unit |
|---|---|---|
| density | kilogram per cubic meter (kg/m³) | |
| mass | kilogram (kg) | |
| volume | cubic meter (m³) |
Rearranged to find another variable:
Valid for: average density for non-uniform objects.
Example 1 Identifying a mystery metal block
A shiny gray block has a mass of 0.81 kg and a volume of 3.0 × 10⁻⁴ m³. What is its density?
- Given:
- mass:
- volume:
- mass:
- Formula:
- Substitute:
- Answer:
That matches the typical density of aluminum in the table, a strong clue to what the block is made of.
Example 2 How heavy is a stone countertop?
A granite countertop is 3.0 m long, 0.60 m deep and 0.03 m thick, so its volume is 0.054 m³. Granite has a density of about 2,700 kg/m³. What is its mass?
- Given:
- density:
- volume:
- density:
- Formula:
- Substitute:
- Answer:
That is about two adults' worth of stone, which is why installers carry countertops as a team.
| Solid | Type | Density (kg/m³) | Density (g/cm³) | Melting point (°C) |
|---|---|---|---|---|
| Pine wood | Natural material | about 500 | about 0.5 | Burns before melting |
| Ice | Crystalline (molecular) | 917 | 0.917 | 0 |
| Window glass | Amorphous | about 2,500 | about 2.5 | Softens over a range |
| Aluminum | Crystalline (metal) | 2,700 | 2.70 | 660 |
| Iron | Crystalline (metal) | 7,870 | 7.87 | 1,538 |
| Copper | Crystalline (metal) | 8,960 | 8.96 | 1,085 |
| Lead | Crystalline (metal) | 11,340 | 11.34 | 327 |
| Gold | Crystalline (metal) | 19,300 | 19.3 | 1,064 |
| Source: Typical room-temperature values at normal pressure; wood and glass vary with species and composition · Retrieved October 2026 | ||||
How Do Solids Change State?
Adding heat makes the particles of a solid vibrate more strongly. At the melting point, the vibrations become strong enough to break the fixed arrangement, and the solid turns into a liquid. The temperature stays steady during melting, because the incoming energy goes into loosening the structure instead of raising the temperature.
Some solids skip the liquid stage completely. Dry ice, which is solid carbon dioxide, turns straight into gas at normal air pressure, a process called sublimation. The reverse processes, freezing and deposition, release the same energy back out. All of these are covered on our phase changes page.
Why Do Solids Expand When Heated?
Heating a solid makes its particles vibrate with larger swings, so on average they sit slightly farther apart. The whole object grows a little in every direction. The change in length follows
The effect is small but powerful. Engineers leave gaps in bridges, railway tracks and concrete sidewalks so the materials have room to grow in summer. A tight metal jar lid loosens under hot water because the metal expands more than the glass. Our thermal expansion page has more examples.
Example 3 A steel bridge on a hot day
A 25 m steel bridge section warms by 40 K from a cold morning to a hot afternoon. Steel's coefficient of linear expansion is about 1.2 × 10⁻⁵ per kelvin. By how much does the section lengthen?
- Given:
- coefficient of linear expansion:
- original length:
- temperature change:
- coefficient of linear expansion:
- Formula:
- Substitute:
- Answer:
A gap of about a centimeter may sound small, but without expansion joints it would buckle the deck or crack the supports.
How Do Solids Respond to Forces?
Pull on a steel wire and it stretches slightly, then springs back when you let go. That is elastic behavior. Pull harder and the wire stays permanently longer, which is plastic deformation. Pull harder still and it snaps. Brittle solids like glass and ceramics skip the plastic stage and break suddenly.
Engineers describe this with stress, the force per area, and strain, the fractional change in length. A material's stiffness is its Young's modulus, the ratio of the two. The difference between bending back and staying bent is covered on our elastic and plastic deformation page.
Why Do Sound and Heat Travel Well Through Solids?
Because neighboring particles in a solid are tightly linked, a push on one passes quickly to the next. Sound is a chain of such pushes, so it races through steel more than fifteen times faster than through air. You can hear a distant train by putting your ear to a fence rail long before you hear it through the air. Our question page on why sound travels faster in solids explains the details.
Heat moves through solids the same way, by conduction. Fast-vibrating particles at the hot end jostle their neighbors and pass the energy along. Metals are especially good conductors because they also contain free electrons that carry energy quickly, the same electrons that let them carry electric current.


What Are Some Everyday Examples of Solids?
- Metals: iron nails, copper wire, aluminum foil, gold jewelry.
- Minerals and rocks: granite, quartz, table salt, chalk.
- Frozen substances: ice cubes, frost, frozen butter, dry ice.
- Living materials: wood, bone, teeth, seashells.
- Human-made materials: glass, plastic bottles, rubber tires, concrete.
A handy test: if an object keeps its shape on a flat table without a container, it is a solid. Powders and sand pass the test grain by grain even though a pile of them can be poured. To check your understanding, try our states of matter worksheets, and see mass vs volume for the two quantities behind density.
Common Misconceptions
Myth: The particles in a solid do not move at all.
Physics: They vibrate constantly around fixed positions. Only at absolute zero would that motion reach its minimum, and even then it would not stop completely.
Myth: Old window glass is thicker at the bottom because glass slowly flows like a liquid.
Physics: Glass is an amorphous solid that does not measurably flow at room temperature. Uneven old panes came from the way they were made and installed.
Myth: Powders like sand and flour are liquids because you can pour them.
Physics: Each grain is a tiny solid with its own fixed shape. The pile pours because grains slide past each other, not because the material itself flows.
Myth: A solid always sinks in its own liquid.
Physics: Most do, but ice floats on water because water molecules lock into an open pattern when they freeze, making the solid less dense.
Key Facts
- A solid has a definite shape and a definite volume because its particles are held in fixed positions.
- Particles in a solid vibrate about their positions but cannot slide past one another.
- Crystalline solids have a repeating particle pattern and a sharp melting point; amorphous solids do not.
- Density, ρ = m / V, is a key property for identifying a solid material.
- Most solids are denser than their liquid form, but ice is less dense than liquid water, so it floats.
- Solids expand when heated, by ΔL = αLΔT, so bridges and rails need expansion gaps.
- Sound and heat travel through solids faster than through gases because the particles are tightly linked.
Quick Quiz: How Well Do You Know Solids?
6 questions. Tap an answer to check it.
Which describes the particles in a solid?
Particles in a solid are tightly packed and vibrate around fixed positions.
Which of these is an amorphous solid?
Glass has particles fixed in place but with no repeating pattern.
A block has a mass of 2 kg and a volume of 0.001 m³. What is its density?
ρ = m / V = 2 / 0.001 = 2,000 kg/m³.
Why do bridges have expansion joints?
Solids expand when heated, so gaps prevent the structure from buckling.
Which solid floats in its own liquid?
Ice is less dense than liquid water because its molecules form an open pattern.
What happens to the temperature of a crystalline solid while it is melting?
The added energy breaks the fixed arrangement instead of raising the temperature.
Frequently Asked Questions
What is a solid in science?
In science, a solid is a state of matter with a fixed shape and a fixed volume. Its atoms, ions or molecules are packed closely and held in place by strong attractive forces, so they can only vibrate around fixed positions. Unlike liquids and gases, a solid does not spread out to fill a container and is very hard to compress.
What are 5 properties of solids?
Five key properties are a definite shape, a definite volume, high density compared with gases, very low compressibility, and particles that vibrate in fixed positions instead of flowing. Many solids also show elasticity, meaning they spring back after being stretched, and crystalline solids melt at one sharp temperature. Together these explain why solids make good building materials and tools.
What is the difference between crystalline and amorphous solids?
Crystalline solids, such as salt, ice and metals, have particles arranged in a regular repeating pattern and melt at a single sharp temperature. Amorphous solids, such as glass, rubber and many plastics, have particles fixed in place but in a disordered arrangement. They soften gradually over a range of temperatures and tend to break with curved, irregular surfaces instead of flat faces.
Why can't solids be compressed easily?
The particles in a solid already touch their neighbors, so there is almost no empty space to squeeze out. Pushing them closer means fighting strong repulsive forces between atoms. That is why even enormous pressures change the volume of a steel or stone block by only a tiny fraction, while the same push would shrink a gas dramatically.
Do particles in a solid move?
Yes. Particles in a solid vibrate constantly around fixed positions, a bit like people bouncing in assigned seats. The hotter the solid, the larger the vibrations. What they cannot do is slide past one another or travel freely, which is what liquids and gases do. If the vibrations grow large enough, the structure breaks down and the solid melts.
Why does ice float if it is a solid?
When water freezes, its molecules link into an open, hexagonal pattern that takes up more space than the same molecules in liquid water. That makes ice about 8 percent less dense than water, at roughly 917 kg/m³ compared with about 1,000 kg/m³, so it floats. Most other substances do the opposite and sink in their own liquid.
Is glass a solid or a liquid?
Glass is a solid, specifically an amorphous solid. Its particles are locked in place but lack the regular pattern of a crystal. The popular claim that old cathedral windows are thicker at the bottom because glass flows over centuries is a myth; at room temperature the flow would be far too slow to notice in billions of years.
Can a solid turn directly into a gas?
Yes. This is called sublimation. Dry ice, which is frozen carbon dioxide, sublimates at normal air pressure, producing the fog seen in stage shows. Snow and ice can also sublimate slowly on cold, dry, sunny days, which is why snowbanks shrink even when the temperature stays below freezing. The reverse change, from gas straight to solid, is called deposition.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








