Law of elasticity

Hooke's Law

Hooke's law states that the force needed to stretch or compress a spring is directly proportional to how far it is stretched or compressed, as long as the deformation stays small. Written F = −kx, it says the spring always pulls back toward its natural length, with a strength set by its spring constant k.

Steel coil spring stretched between two gloved hands, the everyday picture of Hooke's law where force grows with stretch
The farther the spring is pulled, the harder it pulls back, which is Hooke's law in action.

At a Glance

Hooke's law is F = −k x, where F is the spring's restoring force in newtons, k is the spring constant in newtons per meter and x is the stretch or compression in meters. Double the stretch and the force doubles, until the spring passes its elastic limit.

Discovered by
Robert Hooke
Published
1676 as a Latin anagram, solved in 1678
Formula
F = −kx
Spring constant unit
newton per meter (N/m)
Scalar or vector
Vector law: the force points opposite the displacement
Applies to
Springs and solids deformed within their elastic limit
On this page
  1. What Does Hooke's Law Say?
  2. Hooke's Law Explained Simply
  3. What Is the Formula for Hooke's Law?
  4. What Does the Spring Constant k Mean?
  5. Why Is There a Minus Sign in Hooke's Law?
  6. Who Discovered Hooke's Law?
  7. Where Is Hooke's Law Used in Everyday Life?
  8. How Much Energy Does a Stretched Spring Store?
  9. Going Deeper: When Does Hooke's Law Stop Working?
  10. Practice Hooke's Law Problems
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Does Hooke's Law Say?

Hooke's law says that a spring's force grows in step with its deformation. Stretch a spring 1 cm and it pulls back with some force; stretch it 2 cm and it pulls back with twice that force; 3 cm gives three times as much. The same holds when you squeeze it, except that the spring then pushes outward instead of pulling inward.

This straight-line relationship is called linear elastic behavior. It is not limited to coiled springs. Rubber bands, diving boards, bridge cables, bones and even the bonds between atoms follow Hooke's law for small enough deformations, which makes it one of the most widely used rules in physics and engineering.

Hooke's Law Explained Simply

A spring always wants to get back to its normal length. Pull it longer and it tugs back. Push it shorter and it shoves back. The farther you move it from normal, the harder it fights you.

Some springs are stiff, like the ones under a car, and fight back hard after only a small squeeze. Others are soft, like the spring in a retractable pen, and give way easily. The number that says how stiff a spring is gets the letter k. Hooke's law is just this: force equals stiffness times distance, with the force pointing back toward normal.

What Is the Formula for Hooke's Law?

Hooke's law is written F=−kx. Here F is the force the spring exerts in newtons, k is the spring constant in newtons per meter and x is the displacement from the spring's natural, relaxed length in meters. Positive x means stretched and negative x means compressed, measured along the spring.

Many problems only need sizes, so you will often see the magnitude form |F|=k|x|. It gives the size of the force, and you then use common sense for the direction: back toward the natural length. To find the force needed to stretch a spring, rather than the force the spring exerts, drop the minus sign, because your pull and the spring's pull are equal and opposite.

Here is Hooke's law with each variable and its SI unit, plus the rearranged forms for finding the spring constant or the displacement.

F=−kx
What each symbol means
SymbolQuantitySI unit
Frestoring force exerted by the springnewton (N)
kspring constant (force constant)newton per meter (N/m)
xdisplacement from equilibrium (stretch or compression)meter (m)

Rearranged to find another variable:

k=−Fxx=−Fk

Valid for: within the elastic limit; minus sign: force opposes displacement. In magnitudes |F| = k|x|.

Example 1 Squashing a pogo stick spring

A pogo stick spring has a spring constant of 9,000 N/m. A rider pushes it down so that it is compressed by 0.12 m, which we write as x = −0.12 m. What force does the spring push back with?

  1. Given:
    • spring constant (force constant): k=9,000 N/m
    • displacement from equilibrium (stretch or compression): x=−0.12 m
  2. Formula: F=−kx
  3. Substitute: k=9,000 N/m,x=−0.12 m
  4. Answer: F=1,080 N

The answer comes out positive because the compressed spring pushes upward, opposite to the downward squash, exactly what the minus sign predicts.

What Does the Spring Constant k Mean?

The spring constant k is the force needed for each meter of stretch. A spring with k = 250 N/m needs 2.5 N to stretch it 1 cm and 12.5 N to stretch it 5 cm, as the table below shows. A larger k means a stiffer spring.

You can find k by hanging known masses on a spring and measuring the extension, then dividing the weight by the stretch. Plotting force against extension gives a straight line through the origin, and the slope of that line is k. Our Hooke's law spring experiment walks through this at home or in class. When several springs are joined, the combined k changes; see springs in series and parallel.

Example 2 Finding k for a hanging scale

A 2.5 kg bag of flour hangs from the spring of a simple hook scale and stretches it by 0.041 m before coming to rest. With g = 9.81 m/s², the spring's upward pull equals the bag's weight. What is the spring constant? (Using magnitudes, k = |F| / |x|.)

  1. Given:
    • m: m=2.5 kg
    • g: g=9.81 m/s2
    • displacement from equilibrium (stretch or compression): x=0.041 m
  2. Formula: k=−Fx
  3. Substitute: m=2.5 kg,g=9.81 m/s2,x=0.041 m
  4. Answer: k=598.2 N/m

A spring constant of several hundred newtons per meter is typical for a kitchen or luggage scale that weighs a few kilograms.

Force and stored energy for a spring with k = 250 N/m
Stretch x (cm)Stretch x (m)Force needed |F| (N)Stored energy ½kx² (J)
0000
10.012.50.0125
20.025.00.050
30.037.50.1125
40.0410.00.200
50.0512.50.3125
60.0615.00.450
Source: Computed with |F| = kx and PE = ½kx² for an example spring with k = 250 N/m, within its elastic limit · Retrieved October 2026

Why Is There a Minus Sign in Hooke's Law?

The minus sign says the spring's force always points opposite to its displacement. Stretch it to the right (x positive) and it pulls left (F negative). Compress it to the left (x negative) and it pushes right (F positive). This kind of force is called a restoring force because it always works to restore the original shape.

That restoring behavior is what makes springs bounce. A mass hanging on a spring, pulled down and released, overshoots the rest point, gets pulled back, overshoots again, and so on. Hooke's law is the reason this motion is a smooth, regular simple harmonic motion. The free-body diagram below shows the balanced case: the spring's upward pull exactly matching the weight of a hanging bag.

Free-body diagram of a 2.5 kg bag on a spring scale, 24.53 N spring force up balancing 24.53 N weight down
At rest, the stretched spring's upward pull exactly balances the 2.5 kg bag's weight.

Who Discovered Hooke's Law?

The law is named after Robert Hooke (1635 to 1703), an English natural philosopher who also built microscopes and worked as an architect after the Great Fire of London. He said he had understood the rule by 1660, but he guarded it at first. In 1676 he published it as a scrambled Latin anagram, a common way back then to claim an idea without revealing it.

In 1678 Hooke gave the solution: ut tensio, sic vis, meaning "as the extension, so the force." He used the principle in his designs for spring-driven watches. Hooke was also a sharp rival of Isaac Newton, and the two argued over credit for ideas about gravity.

Where Is Hooke's Law Used in Everyday Life?

Once you look, springs that follow Hooke's law are everywhere:

  • Weighing scales: a hook or bathroom scale reads weight from how far a spring is stretched or squashed, which only works because the stretch is proportional to the load.
  • Car suspensions: coil springs compress over bumps and push the wheels back down, keeping the tires on the road.
  • Mattresses and sofa cushions: rows of small coil springs share your weight.
  • Trampolines and diving boards: they store energy when bent and return it as a push.
  • Mechanical watches: a tiny hairspring sets the rhythm of the balance wheel.
  • Building design: steel beams and cables are designed to stay in their linear, springy range under expected loads.

Example 3 How far does a car settle on its springs?

A 1,400 kg car rests on four identical suspension springs, each with a spring constant of 30,000 N/m, and each spring carries a quarter of the car's weight (g = 9.81 m/s²). By how much is each spring compressed?

  1. Given:
    • m: m=1,400 kg
    • g: g=9.81 m/s2
    • spring constant (force constant): k=30,000 N/m
  2. Formula: x=−Fk
  3. Substitute: m=1,400 kg,g=9.81 m/s2,k=30,000 N/m
  4. Answer: x=0.1144 m

This is the size of the compression; by the sign convention it would be written as a negative x, since the spring is shortened.

Coil springs of different sizes and wire thickness on a workbench, each with its own spring constant and stiffness
Thicker wire and tighter coils make a stiffer spring with a larger spring constant k.

How Much Energy Does a Stretched Spring Store?

Stretching or squeezing a spring takes work, and that work is stored as elastic potential energy. Because the force grows steadily from zero to kx, the average force over the stretch is half the final force, which gives PEs=12kx2. Double the stretch and you store four times the energy.

When the spring is released, that energy can turn into motion. A toy launcher with a 400 N/m spring compressed 5 cm stores 0.5 J, and as the spring expands the stored energy moves into the kinetic energy of the ball, as the energy bars below show.

Energy bars for a toy launcher spring, 0.5 J of elastic energy turning into kinetic energy of the ball as the spring expands
A 400 N/m spring compressed 5 cm stores 0.5 J, all of which becomes the ball's kinetic energy when friction is ignored.

Going Deeper: When Does Hooke's Law Stop Working?

Hooke's law is an approximation that holds only for small deformations. Stretch a spring too far and it reaches its elastic limit. Beyond that point the coils bend permanently, the spring no longer returns to its original length, and force is no longer proportional to stretch. This permanent change is called plastic deformation.

Some materials never follow Hooke's law closely. Rubber bands stiffen in a curved way as they stretch, and many biological tissues behave similarly. For solid bars and wires, engineers rewrite the law in terms of stress and strain, where the constant becomes Young's modulus, a property of the material rather than of one particular object.

Practice Hooke's Law Problems

Solve for force, spring constant or stretch with our Hooke's law calculator, which shows every step. For printable practice with answer keys, use the Hooke's law worksheets, then test yourself with the quiz below. For the wider topic of how materials stretch and bend, start at our guide to springs and elasticity.

Common Misconceptions

Myth: The minus sign means the force is always negative.

Physics: The sign only shows direction. A compressed spring has negative x and pushes with a positive force, opposite to the squeeze.

Myth: Hooke's law works no matter how far you stretch a spring.

Physics: It applies only within the elastic limit. Overstretched springs deform permanently and stop following the straight-line rule.

Myth: x is the total length of the spring.

Physics: x is the change in length from the relaxed position, not the spring's full length.

Myth: A stiffer spring stores less energy because it stretches less.

Physics: For the same stretch, a stiffer spring stores more energy, since the stored energy ½kx² grows with k.

Key Facts

  • Hooke's law states that a spring's force is proportional to its stretch or compression, F = −kx.
  • The spring constant k, in newtons per meter, measures stiffness: a larger k means a stiffer spring.
  • The minus sign shows that the spring's force always points back toward its natural length.
  • Robert Hooke published the law as an anagram in 1676 and revealed it in 1678 as "ut tensio, sic vis."
  • A spring stores elastic potential energy equal to ½kx², so doubling the stretch stores four times the energy.
  • Hooke's law holds only up to the elastic limit; beyond it the material deforms permanently.
  • Hooke's law is the reason a mass on a spring bounces in simple harmonic motion.
Did you know? Hooke hid his law inside the anagram "ceiiinosssttuv," whose letters rearrange into the Latin phrase ut tensio, sic vis.

Quick Quiz: How Well Do You Know Hooke's Law?

6 questions. Tap an answer to check it.

  1. A spring is stretched twice as far, staying within its elastic limit. What happens to the force it exerts?

  2. What is the SI unit of the spring constant k?

  3. What does the minus sign in F = −kx tell you?

  4. A spring with k = 200 N/m is stretched 0.10 m. What is the size of its force?

  5. What happens when a spring is stretched past its elastic limit?

  6. Who published the law of elasticity in 1678 with the phrase ut tensio, sic vis?

Frequently Asked Questions

What is Hooke's law in simple terms?

Hooke's law says the harder you pull or push on a spring, the more it stretches or squashes, in a perfectly steady way. Twice the force gives twice the stretch. The spring always pulls or pushes back toward its normal length. This simple rule works for most springs and solid materials as long as they are not stretched too far.

What is the formula for Hooke's law?

The formula is F = −kx. F is the force the spring exerts in newtons, k is the spring constant in newtons per meter, and x is how far the spring is stretched or compressed from its relaxed length, in meters. The minus sign tells you the spring's force points opposite to the displacement. For sizes only, use F = kx.

What does k stand for in Hooke's law?

The letter k is the spring constant, sometimes called the stiffness or force constant. It tells you how many newtons of force are needed to stretch the spring by one meter. A soft spring in a retractable pen has a small k and gives way easily, while a car suspension spring typically has a k of tens of thousands of newtons per meter.

What is the unit of the spring constant?

The SI unit of the spring constant is the newton per meter, written N/m. It comes from dividing a force in newtons by a stretch in meters. In base SI units it equals a kilogram per second squared. You may also see newtons per centimeter or pounds per inch for springs sold in hardware stores.

Why is Hooke's law negative?

The negative sign shows direction, not size. A spring always pushes or pulls back toward its natural length, so its force points opposite to the way it was stretched or compressed. If you stretch it to the right, it pulls left. The minus sign captures that opposition, which is why spring forces are called restoring forces.

Does Hooke's law apply to rubber bands?

Only roughly, and only for small stretches. A rubber band starts out close to linear, but as it lengthens it stiffens in a curved way, so the force is no longer proportional to the stretch. Rubber also loses some energy as heat each time it is stretched and released. Metal springs follow Hooke's law much more closely.

What is the elastic limit?

The elastic limit is the largest deformation a material can undergo and still return to its original shape. Below it, Hooke's law holds and the spring springs back fully. Beyond it, the material deforms permanently, the force-stretch graph curves away from a straight line, and the spring will stay longer than before even after the load is removed.

How is Hooke's law related to simple harmonic motion?

A restoring force proportional to displacement is exactly what produces simple harmonic motion. When a mass on a spring is pulled and released, Hooke's law accelerates it back toward the rest point, it overshoots, and the cycle repeats. The result is a smooth, regular oscillation whose period depends only on the mass and the spring constant.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.