
At a Glance
Cohesion is the attraction between like molecules, for example water to water, and adhesion is the attraction between unlike molecules, for example water to glass. When adhesion wins, a liquid wets a surface and spreads; when cohesion wins, it beads up. Cohesion also causes surface tension, γ = F / L.
- Cohesion
- Attraction between like molecules (water to water)
- Adhesion
- Attraction between unlike molecules (water to glass)
- Origin
- Intermolecular forces: hydrogen bonds, dipole and dispersion forces
- Measured by
- Contact angle θ and surface tension γ (N/m)
- Related formula
- γ = F / L
- Water on clean glass
- Adhesion wins: contact angle about 0°
On this page
- What Are Cohesion and Adhesion?
- Cohesion and Adhesion Explained Simply
- What Causes Cohesion and Adhesion?
- How Does Cohesion Create Surface Tension?
- How Does the Contact Angle Show Which Force Wins?
- How Do You Measure Cohesion and Adhesion?
- Why Does Water Curve Up in a Glass but Mercury Curve Down?
- What Are Examples of Cohesion and Adhesion?
- What Is the Difference Between Cohesion and Adhesion?
- How Are Cohesion and Adhesion Used in Technology?
- Where Can You Learn More About Surface Effects?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Are Cohesion and Adhesion?
Cohesion is the tendency of molecules of one substance to stick to each other. It is what holds a drop of water together and gives a liquid its surface tension. Adhesion is the tendency of molecules of one substance to stick to a different substance, like water clinging to a window or paint gripping a wall.
Both are attractions between molecules, so the names describe who is pulling on whom rather than two different kinds of force. The same liquid can show strong adhesion to one surface and weak adhesion to another. Water clings to clean glass but rolls off a freshly waxed car.
The contest between the two pulls explains a long list of everyday sights: drops that bead or spread, the curved edge of water in a glass, a towel soaking up a spill and an insect standing on a pond. This page covers where the pulls come from, how to compare them and where they show up.
Cohesion and Adhesion Explained Simply
Imagine a crowd of people at a party. Cohesion is how much they like holding hands with each other. Adhesion is how much they like holding on to the walls of the room.
If they love the walls more than each other, they spread out along every wall. That is water on clean glass, which spreads into a thin film. If they love each other more than the walls, they huddle in a tight group in the middle. That is water on a waxy leaf, which pulls itself into round beads.
Most real cases sit somewhere in between, which is why a drop on a kitchen counter is neither a flat film nor a perfect ball, but a little dome.
What Causes Cohesion and Adhesion?
Both are produced by intermolecular forces, the electrical attractions between neighboring molecules. They are much weaker than the chemical bonds inside a molecule, but there are enormous numbers of them, so together they matter a lot.
Water is a strong example. Each molecule has a slightly negative oxygen end and slightly positive hydrogen ends, so molecules line up and form hydrogen bonds with their neighbors. That gives water unusually strong cohesion. Glass has oxygen atoms at its surface that water can also bond to, which gives strong adhesion.
Other liquids rely on weaker dispersion forces, the brief attractions between shifting electron clouds. Oils and many plastics interact mainly this way, so oil spreads easily over plastic while water does not. In liquid metals like mercury, the atoms share a sea of electrons and cohesion is far stronger than any pull toward glass.

How Does Cohesion Create Surface Tension?
Deep inside a liquid, every molecule is pulled equally from all sides by its neighbors, so the forces cancel. The first diagram shows six equal pulls on an interior molecule adding up to zero. Nothing about such a molecule is special.
A molecule at the surface has neighbors beside and below it, but none above. Its pulls no longer cancel, and the leftover force points into the liquid, as the second diagram shows. Every surface molecule feels this inward tug, so the surface behaves like a stretched sheet.
That stretched-sheet behavior is surface tension. It is cohesion seen from the outside, and its value tells you how strongly a liquid holds itself together.

How Does the Contact Angle Show Which Force Wins?
Place a drop on a flat surface and look at it from the side. The angle between the solid and the edge of the drop, measured through the liquid, is the contact angle
A small angle means adhesion is strong: the liquid flattens and wets the surface. An angle above 90° means cohesion dominates: the liquid draws itself into a bead and avoids the surface. Surfaces that water avoids are called hydrophobic, and those it spreads over are hydrophilic.
In 1805 the English scientist Thomas Young described how this angle comes from a balance of surface tensions at the line where solid, liquid and air meet. The table sorts contact angles into the behaviors you can actually see.
| Contact angle | Which pull wins | What you see | Typical example |
|---|---|---|---|
| About 0° | Adhesion, strongly | Liquid spreads into a thin film | Water on very clean glass |
| 0° to 90° | Adhesion | Flattened drop, surface is wetted | Water on a kitchen countertop |
| 90° to 150° | Cohesion | Rounded bead, poor wetting | Water on wax or a nonstick pan |
| Above 150° | Cohesion, strongly | Nearly spherical beads that roll off | Water on a lotus leaf |
| About 140° | Cohesion | Liquid metal pulls into a bead | Mercury on glass |
| Source: Standard wetting categories; example angles are typical values for clean surfaces at room temperature · Retrieved October 2026 | |||
How Do You Measure Cohesion and Adhesion?
Cohesion is measured through surface tension, written
The liquid climbs or avoids the plate depending on adhesion, and the surface pulls on the plate along the waterline. The extra pull is
The two worked examples use the same plate twice, once clean and once greasy. Comparing them shows how much a thin film of oil weakens adhesion.
Cohesion is measured through surface tension, the force per unit length along a liquid surface.
| Symbol | Quantity | SI unit |
|---|---|---|
| surface tension | newton per meter (N/m) | |
| force along the surface | newton (N) | |
| length of the line over which the force acts | meter (m) |
Valid for: for a film with two surfaces (e.g. soap film on a wire frame) L counts both: F = 2γl.
Example 1 Pulling a clean glass plate out of water
A thin, perfectly clean glass plate hangs from a force sensor with its lower edge just touching water. The waterline around the plate has a total length of 0.08 m, water's surface tension is 0.0728 N/m, and the contact angle on clean glass is 0°. How much extra downward pull does the water exert on the plate?
- Given:
- surface tension:
- length of the line over which the force acts:
- θ:
- surface tension:
- Formula:
- Substitute:
- Answer:
Strong adhesion lets the water climb the glass, so the surface pulls straight down along the plate with its full strength.
Example 2 The same plate after touching greasy fingers
The plate from the first example is now lightly smeared with skin oil, which raises the contact angle with water to about 70°. With the same 0.08 m waterline and surface tension of 0.0728 N/m, what is the extra pull now?
- Given:
- surface tension:
- length of the line over which the force acts:
- θ:
- surface tension:
- Formula:
- Substitute:
- Answer:
Weaker adhesion tilts the surface away from the plate, so only part of the pull acts along it. This is why lab plates are cleaned so carefully.
Why Does Water Curve Up in a Glass but Mercury Curve Down?
The curved top surface of a liquid in a container is called the meniscus. Water is more attracted to glass than to itself, so it creeps a little way up the wall and the surface forms a shallow dish, a concave meniscus. That is why you read a measuring cylinder at the bottom of the curve.
Mercury is far more attracted to itself than to glass. It pulls away from the wall and its surface bulges upward into a dome, a convex meniscus. In a narrow tube the same contest makes water climb and mercury sink, an effect explained on our capillary action page.

What Are Examples of Cohesion and Adhesion?
Cohesion in action:
- Raindrops and dew drops pull themselves into round shapes.
- A glass can be filled slightly above the rim before it overflows.
- Water striders and floating paper clips rest on the surface of still water.
- Water in tall plants stays connected in long, unbroken columns as leaves pull it upward.
Adhesion in action:
- Raindrops stick to a window instead of sliding straight off.
- A paper towel draws up a spill.
- Wet glass slides cling together and are hard to pull apart.
- Glue, paint and tape all work by bonding to the surface they touch.
Many examples involve both at once. A drop hanging from a leaf stays attached by adhesion and stays in one piece by cohesion, until its growing weight beats one of them.
What Is the Difference Between Cohesion and Adhesion?
The difference lies entirely in the partners. Cohesion acts between identical molecules, adhesion between different ones. The physics behind them, intermolecular attraction, is the same.
A quick test: ask whether the pull would still exist if the liquid were floating alone in space. If it would, as with a drop holding its round shape, it is cohesion. If it needs a second material, like a tabletop or a glass wall, it is adhesion. The table lines the two up side by side.
| Feature | Cohesion | Adhesion |
|---|---|---|
| Attraction between | Like molecules | Unlike molecules |
| Water example | Water to water | Water to glass |
| Main visible effect | Surface tension, round drops | Wetting, clinging, spreading |
| Meniscus when it dominates | Convex (bulges up) | Concave (dips in the middle) |
| Contact angle when it dominates | Above 90° | Below 90° |
| In a narrow tube | Liquid level falls | Liquid level rises |
| Everyday sign | Beads on a waxed car | Drops stuck to a window |
| Source: Summary of the physics on this page · Retrieved October 2026 | ||
How Are Cohesion and Adhesion Used in Technology?
Engineers tune adhesion all the time. Water-repellent coatings on rain jackets, windshields and nonstick pans lower adhesion so water beads and rolls away. Some leaves, like the lotus, do the same naturally with a waxy surface covered in tiny bumps, giving contact angles above 150°.
Adhesives work the other way. A good glue wets both surfaces well, flows into their microscopic roughness and then hardens with strong cohesion of its own. A joint fails either at the boundary, an adhesive failure, or inside the glue, a cohesive failure, and engineers study which one happened to improve the design.
Geckos climb walls using millions of tiny hairs on their toes, which get close enough to a surface for weak dispersion forces to add up to a firm grip. Researchers have copied the idea to make dry adhesive pads that leave no residue.
Where Can You Learn More About Surface Effects?
Cohesion and adhesion are the starting point for the rest of this topic. Read surface tension to see how cohesion is measured and why soap weakens it, then capillary action to see adhesion lift water up narrow tubes. Our fluid formulas sheet collects the equations, and the guide to surface tension and capillarity maps the whole topic. For the molecular side, continue with liquids.
Common Misconceptions
Myth: Cohesion and adhesion are two different fundamental forces.
Physics: Both are intermolecular attractions of electrical origin. The names only say whether the molecules involved are alike or different.
Myth: Water always sticks to surfaces.
Physics: Water's adhesion depends on the surface. It spreads on clean glass but beads up on wax, oily skin and nonstick coatings.
Myth: A liquid with strong cohesion must be thick and slow.
Physics: Cohesion and viscosity are different properties. Water flows easily yet has strong cohesion and a high surface tension.
Myth: Adhesion only matters for glue and tape.
Physics: Adhesion decides how every liquid meets every surface, from rain on a windshield to ink on paper and tears on the eye.
Key Facts
- Cohesion is the attraction between molecules of the same substance; adhesion is the attraction between different substances.
- Both come from intermolecular forces such as hydrogen bonds and dispersion forces.
- Cohesion is responsible for surface tension, measured as γ = F / L in N/m.
- The contact angle shows which pull wins: below 90° adhesion dominates, above 90° cohesion does.
- Water forms a concave meniscus in glass, while mercury forms a convex one.
- When adhesion beats cohesion a liquid rises in a narrow tube; when cohesion wins it is pushed down.
- Water-repellent coatings lower adhesion, while glues and paints are designed to raise it.
Quick Quiz: How Well Do You Know Cohesion and Adhesion?
6 questions. Tap an answer to check it.
Water molecules attracting other water molecules is an example of
Attraction between like molecules is cohesion.
Rain clinging to a car window is mainly due to
Water molecules are attracted to the glass, a different substance.
A drop on a surface has a contact angle of 130°. Which statement is true?
Angles above 90° mean the liquid avoids the surface and pulls itself into a bead.
Which property of a liquid is a direct result of cohesion?
The inward cohesive pull on surface molecules produces surface tension.
Why does mercury form a convex meniscus in a glass tube?
Mercury atoms hold on to each other far more than to glass, so the surface bulges up.
Both cohesion and adhesion come from
They are electrical attractions between neighboring molecules.
Frequently Asked Questions
What is the difference between cohesion and adhesion?
Cohesion is the attraction between molecules of the same kind, such as water molecules holding on to other water molecules. Adhesion is the attraction between molecules of different kinds, such as water molecules holding on to glass. Both are intermolecular forces. Cohesion keeps a drop together and causes surface tension, while adhesion makes a liquid stick to or spread over a surface.
What is an example of cohesion?
A raindrop pulling itself into a round shape is a clear example of cohesion, because the water molecules hold tightly to each other. Other examples include a glass of water filled slightly above the rim without spilling, a paper clip floating on water, and water striders walking on a pond. All of them rely on water molecules attracting each other.
What is an example of adhesion?
Raindrops clinging to a window are a simple example of adhesion, because the water is attracted to the glass. A paper towel soaking up a spill, two wet glass slides sticking together, and paint gripping a wall are others. In every case, molecules of one substance are holding on to the molecules of a different substance.
Why is water so cohesive?
Water molecules are polar, with a slightly negative oxygen end and slightly positive hydrogen ends. Neighboring molecules line up and form hydrogen bonds, and each molecule can bond with several others at once. That network of bonds makes water much more cohesive than most liquids of similar size, which is why its surface tension is so high.
How do cohesion and adhesion cause capillary action?
In a narrow tube, adhesion pulls the liquid up the walls and curves its surface. Cohesion then drags the rest of the liquid along, because the molecules hold on to each other. The column rises until its weight balances the pull. If cohesion beats adhesion, as for mercury in glass, the same contest pushes the liquid down instead.
Why does water bead up on some surfaces?
Water beads up when its cohesion is stronger than its adhesion to the surface. Waxy leaves, freshly waxed cars and nonstick pans attract water only weakly, so the water molecules prefer to hold on to each other and gather into rounded drops. The contact angle on such surfaces is above 90°, and on some textured leaves it is above 150°.
Is surface tension caused by cohesion or adhesion?
Surface tension is caused by cohesion. Molecules at the surface of a liquid are pulled inward by the liquid below and beside them, with nothing equal pulling outward. That inward pull makes the surface act like a stretched sheet. Adhesion affects what happens where the surface meets a solid, such as the shape of the meniscus.
What is a meniscus and what causes it?
A meniscus is the curved top surface of a liquid in a container. It forms because of the balance between adhesion and cohesion at the wall. Water is attracted to glass, so it climbs the wall slightly and forms a concave meniscus. Mercury is attracted far more to itself, so it pulls away from the wall and forms a convex meniscus.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.







