A fluid's internal friction

Viscosity

Viscosity is a measure of a fluid's resistance to flow, caused by internal friction between layers of fluid sliding past each other. Honey has a high viscosity and pours slowly, while water and air have low viscosities. Dynamic viscosity is written η and measured in pascal-seconds; water at room temperature has about one thousandth of a pascal-second.

Thick golden honey folding slowly off a wooden dipper into a glass bowl, a classic example of a high-viscosity liquid
Honey folds and piles up as it pours because its high viscosity resists the layers sliding past each other.

At a Glance

Viscosity is a fluid's internal resistance to flow. For a layer of fluid sheared between two plates, the force is F = η A v / d, where η is the dynamic viscosity in pascal-seconds (Pa·s). Water at 20 °C has η of about 0.001 Pa·s, and honey is thousands of times more viscous.

Symbol
η (eta), sometimes μ
SI unit
pascal-second (Pa·s) = 1 kg/(m·s); 1 poise = 0.1 Pa·s
Defining rule
Shear stress = η × velocity gradient (F/A = η v/d)
Scalar or vector
Scalar property of the fluid
Depends on
The fluid and its temperature; liquids get runnier when heated
On this page
  1. What Is Viscosity?
  2. Viscosity Explained Simply
  3. What Is the Formula for Viscosity?
  4. What Are the Units of Viscosity?
  5. How Does Temperature Affect Viscosity?
  6. How Does Viscosity Affect Flow in a Pipe?
  7. How Does Viscosity Slow Down Falling Objects?
  8. What Are Newtonian and Non-Newtonian Fluids?
  9. How Is Viscosity Measured?
  10. Where Does Viscosity Matter in Everyday Life?
  11. Where Can You Go Next?
  12. Common Misconceptions
  13. Key Facts
  14. Quiz
  15. FAQ

What Is Viscosity?

Viscosity is how strongly a fluid resists flowing. Pour water and syrup side by side and the difference is obvious: the water splashes out at once, while the syrup creeps. Physicists say the syrup has a higher viscosity, or that it is more viscous.

The resistance comes from inside the fluid. When a fluid flows, neighboring layers move at different speeds, and each layer drags on the ones next to it. In liquids this drag comes mainly from attractions between molecules; in gases it comes from molecules wandering between fast and slow layers and carrying their momentum with them.

Viscosity is a property of the fluid itself, like density. It is not the same thing as density, though. Olive oil is less dense than water and floats on it, yet it is far more viscous.

Viscosity Explained Simply

Think of viscosity as how "thick" or "sticky" a liquid feels when it moves. Stir a glass of water and a jar of honey with the same spoon. The honey fights back much harder because its layers cling to each other and resist sliding.

A deck of cards is a good picture. Push the top card sideways and the cards slide over one another, the top one moving most and the bottom one not at all. In a flowing fluid, thin layers slide the same way. Viscosity tells you how hard it is to make those layers slide.

What Is the Formula for Viscosity?

Picture a thin layer of fluid of thickness d between a fixed plate and a top plate of area A that is dragged along at speed v. The fluid touching each plate moves with it, and the speed changes smoothly across the gap. The force needed to keep the top plate moving is F=ηAvd.

Rearranged, η=F/Av/d. The top of that fraction is the shear stress, the sideways force per unit area. The bottom is the velocity gradient, how quickly speed changes across the layer. Viscosity is the ratio of the two, which is why its unit is a pascal (stress) times a second (one over the gradient).

This proportional rule was proposed by Isaac Newton in the late 1600s. Fluids that follow it, such as water, air and most oils, are called Newtonian fluids.

What Are the Units of Viscosity?

The SI unit of dynamic viscosity is the pascal-second (Pa·s), equal to one kilogram per meter per second. Many lab and engineering sources also use the older poise (P), where 1 P = 0.1 Pa·s, and the centipoise (cP), which equals exactly one millipascal-second. Water at 20 °C is close to 1 cP, a handy reference point.

A second quantity, kinematic viscosity, is dynamic viscosity divided by density: ν=η/ρ, in square meters per second. It describes how quickly a fluid's motion spreads out under its own weight and appears in the Reynolds number. Motor oil ratings are based on viscosity measured at set temperatures.

Typical viscosities of common fluids at about 20 °C (approximate)
FluidViscosity (mPa·s = cP)Viscosity (Pa·s)Compared with water
Airabout 0.018about 1.8 × 10⁻⁵about 1/55
Waterabout 1.0about 0.0011×
Ethanolabout 1.2about 0.0012about 1.2×
Olive oilabout 80about 0.08about 80×
SAE 30 motor oilabout 250about 0.25about 250×
Glycerinabout 1,400about 1.4about 1,400×
Honeyabout 2,000 to 10,000about 2 to 10thousands of times
Source: Typical rounded values; viscosity varies with temperature and composition · Retrieved October 2026

How Does Temperature Affect Viscosity?

Heat a liquid and it usually becomes much runnier. The molecules move faster and slip past their neighbors more easily, overcoming the attractions that hold layers together. Warm honey pours far faster than honey from the fridge, and engine oil is thick on a cold morning.

Gases behave the opposite way. Hotter gas molecules move faster and carry more momentum between layers, so a gas's viscosity rises slightly with temperature. The table shows how strongly water thins as it warms: near boiling it flows with less than a sixth of the viscosity it has near freezing.

Approximate viscosity of liquid water at different temperatures
Temperature (°C)Temperature (°F)Viscosity (mPa·s)
032about 1.79
1050about 1.31
2068about 1.00
40104about 0.65
60140about 0.47
80176about 0.35
100212about 0.28
Source: Typical rounded reference values for water at normal atmospheric pressure · Retrieved October 2026

How Does Viscosity Affect Flow in a Pipe?

In a long, narrow tube with smooth flow, the flow rate is given by Poiseuille's law, Q=πr4ΔP8ηl. Doubling the viscosity halves the flow for the same push. Doubling the length does the same.

The radius is the surprise: it appears to the fourth power. Halve the radius of a tube and the flow drops to one sixteenth. This is why a slightly narrowed blood vessel makes the heart work much harder, and why a thin drinking straw is so tiring to use with a thick milkshake.

The law assumes laminar flow, where layers slide smoothly. Fluid touching the wall is at rest and the fastest fluid is in the center, giving a curved speed profile across the tube.

Poiseuille's law shows how viscosity controls the flow rate through a tube. Here it is with every symbol and its SI unit.

Q=πr4(P1−P2)8ηl
What each symbol means
SymbolQuantitySI unit
Qvolume flow ratecubic meter per second (m³/s)
rtube radiusmeter (m)
P1−P2pressure difference between the endspascal (Pa)
ηdynamic viscositypascal second (Pa·s)
ltube lengthmeter (m)

Rearranged to find another variable:

P1−P2=8ηlQπr4η=πr4(P1−P2)8Qlr=(8ηlQπ(P1−P2))1/4

Valid for: laminar flow of a viscous incompressible fluid in a long cylindrical tube.

Example 1 Water through a drip-irrigation tube

A drip-irrigation tube has an inside radius of 0.002 m and a length of 5 m. The pressure at the inlet is 2,000 Pa higher than at the outlet, and the water's viscosity is 0.001 Pa·s. What volume flow rate does Poiseuille's law predict?

  1. Given:
    • tube radius: r=0.002 m
    • pressure difference between the ends: P1−P2=2,000 Pa
    • dynamic viscosity: η=0.001 Pa·s
    • tube length: l=5 m
  2. Formula: Q=πr4(P1−P2)8ηl
  3. Substitute: r=0.002 m,P1−P2=2,000 Pa,η=0.001 Pa·s,l=5 m
  4. Answer: Q=2.513×10−6 m3/s

That is about 2.5 mL each second. The average speed is about 0.2 m/s and the Reynolds number about 800 (both computed), so the flow is laminar and the law applies.

Example 3 Pumping honey through a pipe

A food factory pumps honey with a viscosity of 10 Pa·s through a pipe of radius 0.005 m and length 0.5 m at a flow rate of 1.0 × 10⁻⁶ m³/s. What pressure difference is needed between the ends of the pipe?

  1. Given:
    • volume flow rate: Q=1×10−6 m3/s
    • tube radius: r=0.005 m
    • dynamic viscosity: η=10 Pa·s
    • tube length: l=0.5 m
  2. Formula: P1−P2=8ηlQπr4
  3. Substitute: Q=1×10−6 m3/s,r=0.005 m,η=10 Pa·s,l=0.5 m
  4. Answer: P1−P2=20,370 Pa

Water would need ten thousand times less pressure for the same flow, which is why thick foods are often warmed before pumping.

How Does Viscosity Slow Down Falling Objects?

Drop a marble into a jar of glycerin and it sinks slowly at a steady speed. Three forces act on it: its weight down, a buoyant force up and a viscous drag up. The drag grows with speed until the upward forces balance the weight. From then on the marble falls at its terminal velocity.

For small, slow objects the drag is described by Stokes' law, Fd=6πηrv. A 1 cm glass marble in glycerin settles at roughly 5 cm/s, reaching that speed in a few hundredths of a second (computed with Stokes' law, using typical densities and a glycerin viscosity of about 1.4 Pa·s). Timing such a fall is a classic way to measure viscosity.

Free-body diagram of a marble sinking in glycerin: weight 12.8 mN down, buoyant force 6.5 mN and viscous drag 6.3 mN up
At terminal velocity the viscous drag plus the buoyant force exactly balance the marble's weight.
Graph of a marble's speed in glycerin rising from zero and leveling off near 4.8 cm/s within about 50 milliseconds
In a very viscous liquid the marble reaches its terminal speed almost at once and then sinks steadily (idealized Stokes model).

What Are Newtonian and Non-Newtonian Fluids?

For a Newtonian fluid, viscosity stays the same no matter how fast you stir. Water, air, alcohol, gasoline and plain oils behave this way.

A non-Newtonian fluid changes its viscosity when it is stirred, squeezed or shaken:

  • Shear-thinning fluids get runnier the faster they are worked. Ketchup flows after a shake, and paint spreads easily under a brush but does not drip off the wall.
  • Shear-thickening fluids get stiffer when pushed fast. A thick mix of cornstarch and water flows slowly through your fingers but feels solid when you punch it.
  • Yield-stress fluids such as toothpaste do not flow at all until pushed hard enough.

Blood is mildly shear-thinning, which helps it pass through the smallest vessels.

How Is Viscosity Measured?

Instruments that measure viscosity are called viscometers. Three simple designs are common:

  • Capillary viscometers time how long a fixed volume takes to drain through a thin glass tube, then use Poiseuille's law.
  • Falling-ball viscometers time a ball sinking through the fluid and apply Stokes' law.
  • Rotational viscometers spin a cylinder or disk in the fluid and measure the twisting force needed, which is how non-Newtonian fluids are tested.

The worked example uses the capillary method to identify an unknown oil.

Example 2 Measuring an oil with a narrow tube

A student pushes an oil through a glass tube of radius 0.001 m and length 0.2 m with a steady pressure difference of 5,000 Pa. She collects 1.2 × 10⁻⁷ m³ of oil every second. What is the oil's viscosity?

  1. Given:
    • volume flow rate: Q=1.2×10−7 m3/s
    • tube radius: r=0.001 m
    • pressure difference between the ends: P1−P2=5,000 Pa
    • tube length: l=0.2 m
  2. Formula: η=πr4(P1−P2)8Ql
  3. Substitute: Q=1.2×10−7 m3/s,r=0.001 m,P1−P2=5,000 Pa,l=0.2 m
  4. Answer: η=0.08181 Pa·s

A value near a tenth of a pascal-second is typical of a light oil, roughly eighty times thicker than water.

Where Does Viscosity Matter in Everyday Life?

Engine oil must be thin enough to reach every moving part on a cold start, yet thick enough to keep metal surfaces apart when hot; multigrade oils are blended to manage both. Lava with high viscosity traps gas and can erupt explosively, while runny lava flows out in rivers. Blood viscosity affects how hard the heart pumps.

In cooking, sauces thicken as starch swells, and chocolate makers control temperature carefully to get the right flow. Viscosity also decides whether flow stays smooth or turns chaotic, a story told on our laminar and turbulent flow page. Air's small viscosity is the source of skin friction, part of the air resistance on cars and planes.

Glowing orange lava creeping slowly over dark rock with a wrinkled crust, showing how viscous molten rock flows
Lava is many thousands of times more viscous than water, so even on a slope it creeps rather than gushes.

Where Can You Go Next?

See how the flow speed changes with pipe size on our continuity equation page, then compare with the ideal, friction-free flow behind Bernoulli's principle. For every fluid equation on one page, use our fluid formulas sheet, and test yourself with the quiz below.

Common Misconceptions

Myth: Thicker, more viscous liquids are always denser.

Physics: Viscosity and density are unrelated properties. Vegetable oil is less dense than water and floats on it, yet it is dozens of times more viscous.

Myth: Heating any fluid makes it less viscous.

Physics: That is true for liquids, but gases become slightly more viscous when heated because their faster molecules carry more momentum between layers.

Myth: Viscosity is just friction between the fluid and the walls of its container.

Physics: Viscosity is friction inside the fluid, between its own layers. The wall only sets the fluid next to it at rest; the resistance comes from the layers dragging on each other.

Myth: A fluid always has one fixed viscosity at a given temperature.

Physics: Only Newtonian fluids do. Ketchup, paint and cornstarch slurry change viscosity depending on how fast they are stirred or squeezed.

Key Facts

  • Viscosity is a fluid's resistance to flow, caused by friction between layers moving at different speeds.
  • Dynamic viscosity η is measured in pascal-seconds; 1 centipoise equals 1 millipascal-second.
  • Water at 20 °C has a viscosity of about 0.001 Pa·s, or about 1 cP.
  • Liquids become less viscous when heated, while gases become slightly more viscous.
  • Poiseuille's law shows that flow through a tube depends on the fourth power of its radius.
  • Newtonian fluids keep the same viscosity at any stirring rate; non-Newtonian fluids do not.
  • Viscosity and density are different properties: oil floats on water yet is far more viscous.
Did you know? A famous laboratory experiment begun in 1927 lets a funnel of pitch, a tar-like substance that shatters under a hammer, drip on its own; it has produced only a handful of drops in nearly a century because its viscosity is hundreds of billions of times that of water.

Quick Quiz: How Well Do You Know Viscosity?

6 questions. Tap an answer to check it.

  1. What does viscosity measure?

  2. What is the SI unit of dynamic viscosity?

  3. What usually happens to the viscosity of a liquid when it is heated?

  4. By Poiseuille's law, what happens to the flow rate if a tube's radius is halved?

  5. Which of these is a shear-thinning fluid?

  6. Olive oil floats on water. What does this tell you about its viscosity?

Frequently Asked Questions

What is viscosity in simple terms?

Viscosity is how thick or runny a fluid is, or more precisely how much it resists flowing. Honey and syrup have high viscosity and pour slowly. Water, gasoline and air have low viscosity and flow easily. The resistance comes from friction between layers of the fluid as they slide past each other while it moves.

What is the SI unit of viscosity?

The SI unit of dynamic viscosity is the pascal-second, written Pa·s, which equals one kilogram per meter per second. You will also see the poise, equal to 0.1 Pa·s, and the centipoise, equal to 0.001 Pa·s. Water at room temperature has a viscosity of about 1 centipoise. Kinematic viscosity uses square meters per second instead.

What is the difference between dynamic and kinematic viscosity?

Dynamic viscosity, η, measures the force needed to shear a fluid and is given in pascal-seconds. Kinematic viscosity, ν, is dynamic viscosity divided by the fluid's density, given in square meters per second. Kinematic viscosity matters when a fluid flows under its own weight, such as oil draining through a cup viscometer, and appears in the Reynolds number.

Why does honey flow faster when it is warm?

Heating gives honey's molecules more energy, so they slip past one another more easily and the attractions between layers matter less. The viscosity drops steeply with temperature, so honey warmed by a few tens of degrees can pour several times faster. That is why recipes suggest warming honey or syrup before measuring it.

Is viscosity the same as density?

No. Density is mass per unit volume, while viscosity is resistance to flow. The two do not track each other. Mercury is very dense yet flows about as easily as water, and olive oil is less dense than water but much more viscous. A fluid can be heavy and runny, or light and thick.

What is a non-Newtonian fluid?

A non-Newtonian fluid is one whose viscosity changes with how fast it is stirred or deformed. Ketchup and paint become runnier when worked, which is called shear thinning. A cornstarch and water mix becomes stiffer under a sudden push, which is called shear thickening. Water, air and simple oils are Newtonian and keep one viscosity at a given temperature.

Does air have viscosity?

Yes. Air's viscosity is about 0.018 millipascal-seconds at room temperature, roughly 55 times smaller than water's. It is small but important: it creates skin friction on cars and aircraft, sets how fast tiny droplets and dust settle, and shapes the thin boundary layer of slow air that clings to every surface moving through it.

How does viscosity affect the speed of a falling object?

A more viscous fluid creates a larger drag force at a given speed, so an object sinking through it reaches a lower terminal velocity. For small, slow spheres, Stokes' law says the drag is proportional to viscosity, so doubling the viscosity halves the terminal speed. A marble falls quickly through water but slowly through glycerin or honey.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.