Speed with a direction

Velocity

Velocity is the rate at which an object's position changes, so it tells you both how fast something moves and in which direction. Average velocity equals displacement divided by the time taken, and its SI unit is the meter per second. Because direction is part of it, velocity is a vector and can be positive, negative or zero.

Two cars driving in opposite directions on a straight highway, same speed but opposite velocities
Two cars at the same speed in opposite lanes have equal speeds but opposite velocities.

At a Glance

Velocity is displacement per unit time, written v = Δx / Δt, where Δx is the change in position in meters and Δt is the time in seconds. It is a vector measured in meters per second (m/s), so a car going 20 m/s east and one going 20 m/s west have the same speed but different velocities.

Symbol
v (average velocity: v̄)
SI unit
meter per second (m/s)
Formula
v̄ = Δx / Δt
Scalar or vector
Vector: size and direction
Depends on
Displacement and elapsed time, not total path length
Size of velocity
Called speed
On this page
  1. What Is Velocity in Physics?
  2. Velocity Explained Simply
  3. What Is the Formula for Velocity?
  4. What Is the Difference Between Average and Instantaneous Velocity?
  5. What Does a Negative Velocity Mean?
  6. What Is the Difference Between Constant and Changing Velocity?
  7. How Do You Find Velocity on a Graph?
  8. How Does Velocity Work in Two Dimensions?
  9. What Are Some Examples of Velocity in Everyday Life?
  10. Going Deeper: Velocity as a Derivative
  11. Practice Velocity Problems
  12. Common Misconceptions
  13. Key Facts
  14. Quiz
  15. FAQ

What Is Velocity in Physics?

Velocity describes how quickly an object's position changes and which way that change points. If a runner covers ground at 5 m/s heading north, the full velocity is "5 m/s north." Drop the word north and you are left with the runner's speed, which is only half the story.

Velocity is built on displacement, the straight-line change in position from start to finish, rather than on the total distance traveled. That choice has real consequences. A swimmer who finishes two lengths of a 25 m pool ends where she started, so her displacement is zero and her average velocity for the whole swim is zero, even though she was clearly moving the entire time.

Because it has both a size and a direction, velocity is a vector. Its size is called speed, and its SI unit is the meter per second (m/s). In everyday life you will also see kilometers per hour and miles per hour; 1 m/s is exactly 3.6 km/h.

Velocity Explained Simply

Imagine giving a friend directions. Saying "walk at a normal pace for five minutes" will not get them anywhere useful. Saying "walk at a normal pace toward the river for five minutes" will. The first instruction is a speed; the second is a velocity.

So velocity is speed plus an arrow. The length of the arrow shows how fast, and the way it points shows where. Two cars on the same highway at the same speed but in opposite lanes have equal speeds and opposite velocities.

Whenever the arrow changes, the velocity changes. That happens when the object speeds up, slows down or simply turns. A car going around a roundabout at a steady 30 km/h has a constant speed, but its velocity keeps changing because its direction keeps changing.

What Is the Formula for Velocity?

Average velocity is the displacement divided by the time it took: v¯=ΔxΔt=xf−x0tf−t0. The bar over the v means "average," and the Greek letter delta (Δ) means "change in." Put displacement in meters and time in seconds, and the answer comes out in meters per second.

To use the formula, first choose a positive direction, such as east or up. Then subtract the starting position from the final position to get Δx, keeping its sign. Divide by the elapsed time, which is always positive. The sign of your answer tells you the direction of the average velocity.

The formula ignores everything that happened between the start and the end. A taxi that zigzags through side streets and one that drives straight down a boulevard have the same average velocity if they start and finish at the same points at the same times. We cover this formula in detail, with more examples, on our average velocity page.

Here is the average velocity formula with each variable and its SI unit, plus the rearranged forms for finding displacement or time.

v¯=ΔxΔt=xf−x0tf−t0
What each symbol means
SymbolQuantitySI unit
v¯average velocitymeter per second (m/s)
Δxdisplacementmeter (m)
Δttime intervalsecond (s)

Rearranged to find another variable:

Δx=v¯ΔtΔt=Δxv¯

Valid for: velocity is a vector; Δx is displacement (sign gives direction), not distance.

Example 1 A city bus heading east

A city bus pulls away from a stop and, 300 s later, is 1,350 m farther east along a straight avenue. Taking east as positive, what is its average velocity?

  1. Given:
    • displacement: Δx=1,350 m
    • time interval: Δt=300 s
  2. Formula: v¯=ΔxΔt=xf−x0tf−t0
  3. Substitute: v¯=(1,350 m)(300 s)
  4. Answer: v¯=4.5 m/s (16.2 km/h, 10.07 mph)

The positive sign carries the direction: the bus moved east on average, even if it paused at lights along the way.

What Is the Difference Between Average and Instantaneous Velocity?

Average velocity summarizes a whole stretch of time with one number. Instantaneous velocity is the velocity at one particular moment, the value a perfect speedometer with a compass would show at that instant.

You can get the instantaneous value by shrinking the time interval. Measure the displacement over one second, then a tenth of a second, then a hundredth. As the interval gets shorter, the average velocity settles toward a single value, and that limit is the instantaneous velocity.

When velocity is constant, the two are the same, which is the idea behind uniform motion. When velocity changes, they differ. A cyclist who averages 6 m/s over a ride might be doing 11 m/s down a hill and 2 m/s up the next one.

What Does a Negative Velocity Mean?

A negative velocity means the object is moving in the direction you chose to call negative. It does not mean the object is slow, and it does not mean it is slowing down. If you pick east as positive, a train heading west at 30 m/s has a velocity of −30 m/s.

The choice of positive direction is yours to make, as long as you stick with it throughout a problem. For a falling stone, many people pick up as positive, so the stone's velocity is negative while it falls. Others pick down as positive to avoid the minus signs. Both give the same physics.

The table below follows a delivery cyclist along a straight street, with east as positive. Notice how the velocity on the third leg turns negative when the rider heads back west, and how the whole-trip average velocity is smaller than the average speed because the backtracking cancels out part of the progress.

Example 2 An elevator going down

An elevator in a tall office building starts 84 m above the lobby and arrives at the lobby 12 s later. Taking up as positive, what is the elevator's average velocity?

  1. Given:
    • displacement: Δx=−84 m
    • time interval: Δt=12 s
  2. Formula: v¯=ΔxΔt=xf−x0tf−t0
  3. Substitute: v¯=(−84 m)(12 s)
  4. Answer: v¯=−7 m/s

The minus sign is not a mistake; it simply says the elevator moved downward, opposite to the direction we chose as positive.

A delivery cyclist on a straight street (east is positive, position measured from the depot)
LegTime interval (s)Position change (m)Average velocity (m/s)What the rider did
10 to 1200 → 540+4.5Rode east
2120 to 200540 → 5400Stopped at a door
3200 to 320540 → 180−3.0Rode back west
4320 to 470180 → 930+5.0Rode east again
Whole trip0 to 4700 → 930+1.98Average speed was 3.51 m/s
Source: Computed with v̄ = Δx/Δt for an invented trip; average speed computed as total distance 1,650 m ÷ 470 s · Retrieved October 2026
Velocity-time graph with positive velocity, a zero stretch, then negative velocity below the time axis
The same walk on a velocity-time graph: the return leg sits below the axis because its velocity is negative.

What Is the Difference Between Constant and Changing Velocity?

An object has constant velocity only if both its speed and its direction stay the same, which means it moves in a straight line at a steady pace. A hockey puck gliding across smooth ice comes close. So does a train cruising on a long straight section of track.

Any change in velocity is called acceleration. Speeding up, braking and turning all count. This is why physicists say a satellite in a circular orbit is accelerating all the time, even though its speed barely changes: the direction of its velocity rotates once every orbit.

The link between the two ideas is simple. Acceleration is the rate of change of velocity, just as velocity is the rate of change of position. For a clear side-by-side look at both quantities, see velocity vs acceleration.

How Do You Find Velocity on a Graph?

On a position-time graph, velocity is the slope. A steep line means a large velocity, a flat line means the object is at rest, and a line that slopes downward means a negative velocity. For a curved line, the slope of the tangent at a point gives the instantaneous velocity at that moment.

On a velocity-time graph, velocity is read straight off the vertical axis. Points above the time axis are positive velocities and points below it are negative. The slope of that graph is the acceleration, and the area between the line and the time axis is the displacement.

The diagram below shows the position-time graph for a short walk. The slope triangle on the first stretch gives the walker's velocity directly as rise over run.

Position-time graph: rising line at 1.6 m/s, flat pause, then falling line for a negative velocity of 0.8 m/s
Velocity is the slope of the position-time graph: positive going out, zero while paused, negative on the way back.

How Does Velocity Work in Two Dimensions?

In real life, motion is rarely confined to one straight line. A ball thrown across a field moves forward and up at the same time, and a boat crossing a river moves across the water and downstream together. In these cases velocity has components, one along each direction.

You can treat each component separately and then combine them. If an object's velocity is 3 m/s east and 4 m/s north at the same time, its overall velocity has a size of 5 m/s, found with the Pythagorean theorem, and it points between east and north. Our page on resolving vectors into components shows the method step by step.

The same idea explains why a passenger walking down the aisle of a moving train has a different velocity relative to the train than relative to the ground. Velocities measured from different viewpoints add as vectors, which is the subject of relative velocity.

Example 3 A survey drone flying diagonally

A survey drone moves 120 m east and 50 m north in 26 s, flying in a straight line. What is the size of its average velocity?

  1. Given:
    • x: x=120 m
    • y: y=50 m
    • time interval: Δt=26 s
  2. Formula: v¯=ΔxΔt=xf−x0tf−t0
  3. Substitute: x=120 m,y=50 m,Δt=26 s
  4. Answer: v¯=5 m/s (18 km/h, 11.18 mph)

The straight-line displacement is found with the Pythagorean theorem first, then divided by the time; the direction points a little north of east.

Ball flying in an arc over a grassy field, moving forward and up at once with two velocity components
A thrown ball moves forward and up at the same time, so its velocity has two components.

What Are Some Examples of Velocity in Everyday Life?

Weather forecasts give wind velocity, not just wind speed: "winds from the northwest at 25 km/h" names both the size and the direction, and that direction decides which side of a building gets hit. Pilots care about the same thing, since a headwind and a tailwind of equal speed have very different effects on a flight.

Rivers, ocean currents and air traffic all depend on velocity. A kayaker paddling at 2 m/s relative to the water moves at 3 m/s relative to the bank when going with a 1 m/s current, but only 1 m/s when paddling against it. GPS units in phones and cars work out velocity by comparing positions a moment apart, then show you both your speed and your heading.

Even a skydiver's motion is a velocity story. After jumping, the downward velocity grows until air resistance balances weight, and the diver then falls at a steady terminal velocity.

Going Deeper: Velocity as a Derivative

In calculus terms, instantaneous velocity is the derivative of position with respect to time, v=dxdt. This is just the shrinking-interval idea written compactly. If you know an object's position as a function of time, differentiating it gives the velocity at every instant.

The process also runs in reverse. Integrating velocity over time gives the displacement, which is why the area under a velocity-time graph equals displacement. Our kinematics with calculus page develops both directions, and the constant-acceleration special cases are collected on the kinematic equations page.

Practice Velocity Problems

Velocity problems get easier once choosing a positive direction becomes a habit. Our speed, velocity and acceleration worksheets offer printable sets with answer keys. You can check distance and time arithmetic with the speed, distance and time calculator, then test yourself with the quiz below.

Common Misconceptions

Myth: Velocity and speed are just two words for the same thing.

Physics: Speed is only how fast something moves. Velocity adds the direction, so two objects with equal speeds can have different velocities.

Myth: A negative velocity means the object is slowing down.

Physics: The sign shows direction only. An object can have a negative velocity and be speeding up, as long as it moves faster and faster in the negative direction.

Myth: If a car's speedometer reading stays the same, its velocity is constant.

Physics: Turning changes the direction of motion, so the velocity changes even when the speed does not.

Myth: Average velocity is the total distance divided by the time.

Physics: That is average speed. Average velocity uses displacement, the straight-line change in position, so backtracking reduces it.

Key Facts

  • Velocity is the rate of change of position, including the direction of motion.
  • Average velocity equals displacement divided by elapsed time, v̄ = Δx/Δt.
  • The SI unit of velocity is the meter per second, and 1 m/s equals 3.6 km/h.
  • Velocity is a vector, while speed, its size, is a scalar.
  • A negative velocity means motion in the direction chosen as negative, not slow motion.
  • Any change in speed or direction is a change in velocity, which is acceleration.
  • The slope of a position-time graph gives velocity, and the area under a velocity-time graph gives displacement.
Did you know? A person standing still on the equator has zero velocity relative to the ground, yet Earth's spin carries them east at roughly 465 m/s, faster than the speed of sound in air.

Quick Quiz: How Well Do You Know Velocity?

6 questions. Tap an answer to check it.

  1. Which quantity is a vector?

  2. A hiker walks 600 m east and then 600 m west in 20 minutes. What is her average velocity?

  3. With up chosen as positive, what is the sign of a falling ball's velocity?

  4. A car drives around a circular track at a steady 20 m/s. Which statement is true?

  5. On a position-time graph, what does the slope represent?

  6. What is 10 m/s in kilometers per hour?

Frequently Asked Questions

What is velocity in simple terms?

Velocity is how fast something moves together with the direction it moves in. A car going 50 km/h has a speed; a car going 50 km/h north has a velocity. If either the speed or the direction changes, the velocity changes. Physicists use velocity rather than speed whenever direction matters, which is most of the time in mechanics.

What is the formula for velocity?

Average velocity equals displacement divided by the time taken, v̄ = Δx / Δt. Displacement is the final position minus the starting position, including its sign, and the time is the elapsed time. For constant acceleration you can also use the kinematic equation v = v0 + at to find the velocity at a later moment from the starting velocity and the acceleration.

What is the SI unit of velocity?

The SI unit of velocity is the meter per second, written m/s. It comes from dividing a displacement in meters by a time in seconds. Other common units are kilometers per hour, miles per hour, feet per second and knots. To convert meters per second to kilometers per hour, multiply by 3.6, since an hour has 3,600 seconds and a kilometer has 1,000 meters.

Is velocity a scalar or a vector?

Velocity is a vector because it has both a size and a direction. Its size alone is speed, which is a scalar. In one-dimensional problems the direction is shown with a plus or minus sign. In two or three dimensions velocity is written with components, such as 3 m/s east and 4 m/s north, or drawn as an arrow.

Can velocity be negative?

Yes. A negative velocity simply means the object is moving in the direction you defined as negative. If up is positive, a falling apple has a negative velocity. Speed, by contrast, can never be negative because it is only the size of the velocity. Flip your choice of positive direction and the signs of all velocities flip with it, while the physics stays the same.

Can an object have zero average velocity but still be moving?

Yes. Average velocity depends only on where an object starts and finishes. A runner who completes one full lap of a track returns to the starting line, so the displacement is zero and the average velocity for the lap is zero. The runner's average speed, however, is the lap length divided by the lap time, which is clearly not zero.

How do you find velocity from a graph?

On a position-time graph, velocity is the slope: rise in position divided by run in time. A steeper line means a faster velocity and a downward slope means a negative one. On a velocity-time graph, you read the velocity directly from the vertical axis at the time you want. The slope of that second graph gives acceleration instead.

What is the difference between velocity and acceleration?

Velocity tells you how fast position changes and in which direction, measured in meters per second. Acceleration tells you how fast velocity itself changes, measured in meters per second squared. A car cruising in a straight line at a steady 25 m/s has a large velocity but zero acceleration, while a car just pulling away from a light has a small velocity but a large acceleration.

Who first described velocity scientifically?

Galileo Galilei was one of the first to treat motion with careful measurements in the early 1600s. By rolling balls down gentle ramps and timing them, he showed how velocity grows steadily under gravity. His approach of defining quantities precisely and testing them with experiments laid the groundwork that Isaac Newton later built on in his laws of motion.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.