How fast something moves

Speed

Speed is the distance an object travels divided by the time it takes, so it tells you how quickly something covers ground without caring which way it goes. A snail, a cyclist and a jet airliner all have a speed. It is measured in meters per second, it is a scalar, and it can never be negative.

High-speed train racing through green countryside with motion blur, an everyday picture of speed as distance covered per second
A high-speed train covers dozens of meters every second, which is exactly what its speed measures.

At a Glance

Speed is distance traveled per unit of time, found with s = d / t, where d is distance in meters and t is time in seconds. The SI unit is the meter per second (m/s), and speed is a scalar, so it has size but no direction.

Symbol
s (often v when only the size of velocity matters)
SI unit
meter per second (m/s)
Formula
s = d / t (average speed)
Scalar or vector
Scalar, never negative
Depends on
Total distance and elapsed time
Common units
km/h, mph, ft/s, knots
On this page
  1. What Is Speed in Physics?
  2. Speed Explained Simply
  3. What Is the Formula for Speed?
  4. What Is the Difference Between Average and Instantaneous Speed?
  5. What Are the Units of Speed?
  6. How Fast Do Everyday Things Move?
  7. Is Speed the Same as Velocity?
  8. How Is Speed Measured?
  9. What Happens When Speed Changes?
  10. Practice Speed Problems
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Is Speed in Physics?

Speed measures how much distance an object covers in each unit of time. If a runner covers 100 meters every 20 seconds, she covers 5 meters in each second, so her speed is 5 m/s. The bigger the number, the faster the motion.

Speed only cares about the length of the path, not the direction. A car circling a parking lot at a steady 4 m/s has the same speed the whole time, even though it keeps turning. That makes speed a scalar quantity: a single number with a unit and nothing else.

Because it is built from distance, which is always positive or zero, speed can never be negative. An object at rest has a speed of zero, and anything moving has a positive speed.

Speed Explained Simply

Speed is a way of answering one question: how much ground do you cover in a set amount of time? Imagine two friends walking to the same store. The one who arrives first, after starting together, was faster.

You can think of speed as a rate, like pages read per hour or cookies baked per batch. Here it is meters traveled per second. Walk for 10 seconds and cover 14 meters, and you moved at 1.4 meters every second.

Speed does not care where you are headed. Running north or south at the same pace gives the same speed. Direction becomes important only when we talk about velocity, which is the next step up.

What Is the Formula for Speed?

Average speed is total distance divided by total time: s=dt. Use meters for distance and seconds for time, and the answer comes out in meters per second. The same idea works in any matching units, such as kilometers and hours or miles and hours.

The formula can be turned around in two useful ways. Distance equals speed times time, d=st, which tells you how far you will go. Time equals distance divided by speed, t=d/s, which tells you how long a trip will take.

For quick unit conversions or a step-by-step solution for any of the three quantities, use our speed, distance and time calculator. The worked example below shows the basic case.

Here is the average speed formula with each variable and its SI unit, plus the rearranged forms for distance and time.

s=dt
What each symbol means
SymbolQuantitySI unit
saverage speedmeter per second (m/s)
ddistance traveledmeter (m)
telapsed timesecond (s)

Rearranged to find another variable:

d=stt=ds

Valid for: gives the average over the time interval.

Example 1 A morning bike commute

A student cycles 7,200 m from home to school and the trip takes 1,500 s. What is her average speed?

  1. Given:
    • distance traveled: d=7,200 m
    • elapsed time: t=1,500 s
  2. Formula: s=dt
  3. Substitute: s=(7,200 m)(1,500 s)
  4. Answer: s=4.8 m/s (17.28 km/h, 10.74 mph)

That is a relaxed but steady pace, a bit over 17 km/h, typical for a commuter on a city bike.

What Is the Difference Between Average and Instantaneous Speed?

Average speed describes a whole trip. It is the total distance divided by the total time, including every slowdown, red light and coffee stop. A drive of 120 km that takes 2 hours has an average speed of 60 km/h, even if the car sometimes went 100 km/h and sometimes sat still.

Instantaneous speed is the speed at one particular moment. It is what a car's speedometer shows. Mathematically, it is the average speed over a time interval so short that the speed has no chance to change during it.

When an object moves at a constant speed, the two are the same. When it speeds up and slows down, they differ, and you have to be clear which one a question asks for. The position-time graph below shows a trip with a stop in the middle; the steepness of each line is the speed during that stage.

Example 2 How far does the train go?

A regional train holds a steady 34 m/s for 420 s between two stations. How much track does it cover in that time?

  1. Given:
    • average speed: s=34 m/s
    • elapsed time: t=420 s
  2. Formula: d=st
  3. Substitute: d=(34 m/s)(420 s)
  4. Answer: d=14,280 m

Multiplying speed by time gives distance, as long as the speed stays roughly constant over the interval.

Position-time graph of a trip at 5 m/s, a 10 s stop, then 8 m/s, with a slope triangle showing speed as the steepness of the line
Each straight stretch has a constant speed equal to its slope; the flat part is the stop.

What Are the Units of Speed?

The SI unit of speed is the meter per second (m/s), built from the meter and the second. Everyday life uses several others. Road signs in most countries show kilometers per hour, the United States and the United Kingdom use miles per hour, and ships and aircraft use knots, which are nautical miles per hour.

Converting is a matter of multiplying by a fixed factor. One meter per second equals 3.6 km/h, about 2.24 mph, about 3.28 ft/s and about 1.94 knots. To go from km/h back to m/s, divide by 3.6. A handy check: 100 km/h is a little under 28 m/s.

Always convert to m/s before using speed in other physics formulas, such as those for kinetic energy or momentum. Mixing km/h with meters and seconds is one of the most common sources of wrong answers. Our page on unit conversion shows the method in detail.

How Fast Do Everyday Things Move?

Speeds in the world around us span an enormous range. A garden snail creeps along at roughly a centimeter per second, while Earth carries all of us around the Sun at nearly 30 kilometers every second. Most human activity sits between 1 and 30 m/s.

The table lists typical values in three units. They are rounded, representative numbers rather than records, and real values vary with conditions. Sound in air, for example, gets faster as the air warms up; see our page on the speed of sound.

Typical speeds of everyday objects in three units
ObjectSpeed (m/s)Speed (km/h)Speed (mph)
Garden snailabout 0.013about 0.05about 0.03
Adult walkingabout 1.45.03.1
Recreational cyclistabout 5.519.812.3
Elite sprinter at top speedabout 12.444.627.7
Car on a city streetabout 13.448.230.0
Cheetah at full sprintabout 29104.464.9
Car on a highwayabout 31111.669.3
Airliner at cruiseabout 250900559
Sound in air at 20 °Cabout 3431,235767
Earth in its orbit around the Sunabout 29,780107,20866,616
Source: Speeds are typical values; km/h and mph computed with 1 m/s = 3.6 km/h = 2.236936 mph · Retrieved October 2026

Is Speed the Same as Velocity?

No. Velocity is speed with a direction attached, which makes it a vector. A car going 20 m/s east and a car going 20 m/s west have the same speed but opposite velocities.

The difference matters most over a full trip. Average speed uses total distance, while average velocity uses displacement, the straight-line change in position. A runner who finishes one lap of a 400 m track in 80 s has an average speed of 5 m/s but an average velocity of zero, because she ends where she began.

For a full side-by-side breakdown, read speed vs velocity. The short version: speed asks "how fast?" and velocity asks "how fast, and which way?"

How Is Speed Measured?

The simplest method is to time an object over a known distance. Mark two lines 20 m apart, start a stopwatch as a ball crosses the first and stop it at the second, then divide. School labs use light gates that do the same thing electronically and cut out the delay of a human reaction.

Cars measure speed from how fast the wheels turn. Police radar and laser guns bounce a signal off a moving vehicle and read the tiny shift in its frequency or the change in its travel time. GPS receivers work out speed by comparing positions taken a fraction of a second apart.

Each method really measures an average over some short interval. The shorter the interval, the closer the reading gets to the true instantaneous speed.

Example 3 Planning a hike

A hiker keeps an average walking speed of 1.3 m/s on a flat trail that is 5,850 m long. How long will the walk take?

  1. Given:
    • average speed: s=1.3 m/s
    • distance traveled: d=5,850 m
  2. Formula: t=ds
  3. Substitute: t=(5,850 m)(1.3 m/s)
  4. Answer: t=4,500 s

Divide by 60 to get minutes; real hikes take longer because of rest stops, which lower the average speed.

Two cyclists riding side by side on a tree-lined park path, a simple setting for timing speed over a measured distance
Timing a rider between two marked points is the simplest way to measure average speed.

What Happens When Speed Changes?

When speed rises or falls, the object is accelerating. Acceleration measures how quickly velocity changes, in meters per second every second. A car that goes from rest to 15 m/s in 6 s gains 2.5 m/s each second.

On a velocity-time graph, the area under the line equals the distance covered. The second diagram shows a car speeding up evenly and then cruising. The triangle and rectangle under the line add up to the total distance, which you can then divide by the total time to get the average speed.

Speed can also stay constant while velocity changes. A ball whirled on a string at a steady pace changes direction all the time, so it accelerates even though its speed never changes.

Velocity-time graph of a car speeding up from rest to 15 m/s in 6 s, then cruising, with the shaded area showing distance traveled
The shaded area under a speed-time line is the distance covered: a triangle while speeding up plus a rectangle while cruising.

Practice Speed Problems

Speed problems are the foundation of the rest of motion and kinematics, so they are worth practicing until they feel automatic. Our speed worksheets come with answer keys, and the speed, velocity and acceleration worksheets mix in the next topics. Check your work with the speed calculator, then take the quiz below.

Speed also has a long history. Galileo Galilei was among the first to time moving objects carefully and to treat speed as something you could measure and calculate.

Common Misconceptions

Myth: Average speed is just the average of the starting and ending speeds.

Physics: Average speed is total distance divided by total time. Averaging two speeds only works if equal times were spent at each, which is rarely the case.

Myth: Speed and velocity are two words for the same thing.

Physics: Speed has no direction, while velocity does. A runner finishing a full lap has a positive average speed but zero average velocity.

Myth: If speed is constant, the object is not accelerating.

Physics: An object turning at a steady speed changes its direction, so its velocity changes and it does accelerate.

Myth: A speedometer shows average speed.

Physics: A speedometer shows instantaneous speed, the speed at that moment. Average speed for a trip comes from total distance and total time.

Key Facts

  • Speed is the distance an object covers per unit of time, found with s = d / t.
  • The SI unit of speed is the meter per second; 1 m/s equals 3.6 km/h or about 2.24 mph.
  • Speed is a scalar, so it has a size but no direction, and it is never negative.
  • Average speed covers a whole trip, while instantaneous speed is the speed at one moment, as shown on a speedometer.
  • Velocity is speed plus direction; two objects can share a speed but have opposite velocities.
  • The slope of a position-time graph gives the speed, and the area under a speed-time graph gives the distance.
  • Nothing with mass can reach the speed of light in a vacuum, exactly 299,792,458 m/s.
Did you know? Light takes about 499 seconds, a little over 8 minutes, to cross the average distance from the Sun to Earth, so the sunlight you see left the Sun before you finished reading this page.

Quick Quiz: How Well Do You Know Speed?

6 questions. Tap an answer to check it.

  1. A drone flies 600 m in 40 s. What is its average speed?

  2. Which quantity is a scalar?

  3. What does a car speedometer show?

  4. What is 72 km/h in meters per second?

  5. A runner completes one 400 m lap and stops where she started. What is her average velocity for the lap?

  6. On a position-time graph, what tells you the speed?

Frequently Asked Questions

What is speed in physics?

Speed is the rate at which an object covers distance. It equals the distance traveled divided by the time taken, and it is measured in meters per second in the SI system. Speed tells you how fast something moves but says nothing about the direction, which is why physicists call it a scalar quantity. Adding direction turns speed into velocity.

What is the formula for speed?

The formula for average speed is s = d / t, where s is speed, d is the distance traveled and t is the time taken. Rearranged, it gives distance as d = s × t and time as t = d / s. Use meters and seconds for an answer in m/s, or kilometers and hours for an answer in km/h. Keep the units consistent throughout.

What is the SI unit of speed?

The SI unit of speed is the meter per second, written m/s. It comes from dividing the SI unit of length, the meter, by the SI unit of time, the second. Other common units are kilometers per hour, miles per hour, feet per second and knots. One meter per second equals 3.6 kilometers per hour and roughly 2.24 miles per hour.

Is speed a scalar or a vector?

Speed is a scalar. It has a size and a unit but no direction, so 15 m/s north and 15 m/s south are the same speed. Velocity is the matching vector quantity, because it includes direction. Speed is in fact the magnitude, or size, of the instantaneous velocity, which is why speedometers can show it without any compass.

How do you calculate average speed?

Add up the total distance traveled over the whole trip, add up the total time including any stops, and divide the first by the second. For example, 12 km covered in 0.5 hours gives 24 km/h. Do not average separate speeds from different stages unless you spent exactly equal time in each stage, because that usually gives the wrong result.

What is instantaneous speed?

Instantaneous speed is how fast an object is moving at one exact moment. You find it by measuring the distance covered over a very short time interval, so short that the speed barely changes. A car speedometer shows instantaneous speed. On a position-time graph, it equals the steepness of the curve, the slope of the tangent line at that instant.

Can speed be negative?

No. Speed is built from distance, which is never negative, and time, which always moves forward, so speed is always zero or positive. Velocity can be negative, because a minus sign is used to show motion in the opposite direction along a chosen axis. If a calculation gives you a negative speed, check whether you meant velocity or made a sign error.

How do you convert km/h to m/s?

Divide by 3.6. One kilometer is 1,000 meters and one hour is 3,600 seconds, so 1 km/h equals 1,000 ÷ 3,600 m/s, which simplifies to 1/3.6 m/s. For example, 90 km/h divided by 3.6 is 25 m/s. To go the other way, from m/s to km/h, multiply by 3.6 instead.

What is the fastest possible speed?

The fastest possible speed is the speed of light in a vacuum, exactly 299,792,458 meters per second. Nothing that has mass can reach it, because the energy needed grows without limit as an object gets close. Light, radio waves and other massless signals always travel at this speed in empty space, which makes it the universal speed limit for information.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.