
At a Glance
Displacement is how far and in which direction an object ends up from its starting point, Δx = x_f − x_i. It is a vector measured in meters. A runner who finishes one full lap of a track has covered 400 m of distance but has zero displacement, because she is back where she began.
- Symbol
- Δx (or s, or d as a vector)
- SI unit
- meter (m)
- Formula
- Δx = xf − xi
- Scalar or vector
- Vector (size and direction)
- Depends on
- Only the start and end positions
On this page
- What Is Displacement in Physics?
- Displacement Explained Simply
- How Do You Calculate Displacement?
- What Is the Difference Between Distance and Displacement?
- How Do You Find Displacement in Two Dimensions?
- How Are Displacement and Velocity Related?
- How Is Displacement Shown on Motion Graphs?
- What Are Some Examples of Displacement?
- Practice Displacement Problems
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is Displacement in Physics?
Displacement answers one question: how far out of place has the object ended up, and in which direction? Picture an arrow drawn from the starting point to the finishing point. The length of that arrow is the size of the displacement, and the way it points is its direction.
Because it has both size and direction, displacement is a vector. That sets it apart from distance, which only counts how much ground was covered. A walk around the block can add up to hundreds of meters of distance and still leave you with zero displacement once you are back at your front door.
The SI unit of displacement is the meter. On a straight line, physicists usually write it as
Displacement Explained Simply
Imagine you are lost in a park and a friend calls to ask where you are compared with the gate. They do not care that you wandered past the pond, around the playground and back again. They only want to know how far away you are now and which way to walk to reach you. That answer is your displacement.
Distance is like the odometer in a car: it keeps adding up no matter which way you drive. Displacement is like a string stretched tight from the starting point to wherever you are right now. Walk back toward the start and the string gets shorter, even though the odometer keeps climbing.
How Do You Calculate Displacement?
On a straight line, displacement is final position minus initial position:
Follow these steps:
- Pick a reference point and a positive direction.
- Write the starting position and the final position as numbers on that line.
- Subtract the start from the end.
- State the result with its unit and its direction.
Notice that the path in between never appears in the calculation. Only the two endpoints matter.
Example 1 A delivery van on a straight avenue
A delivery van starts at the 350 m marker of a straight avenue and parks at the 1,180 m marker. Taking the direction of increasing markers as positive, what is its displacement?
- Given:
- x_f:
- x_i:
- x_f:
- Formula:
- Substitute:
- Answer:
The answer is positive because the van ended up farther along the positive direction than where it began.
What Is the Difference Between Distance and Displacement?
Distance is a scalar that adds up every meter traveled, whichever way you go. Displacement is a vector that only compares the start and the finish. The two are equal in size only when an object moves in a straight line without turning back.
The table below compares them for a few everyday trips. In every case the displacement is less than or equal to the distance, never more, because a straight line is the shortest path between two points. For a full side-by-side treatment, read our distance vs displacement comparison, and for the bigger picture of size-only versus size-and-direction quantities see scalar vs vector.
| Trip | Distance traveled | Displacement | Direction of displacement |
|---|---|---|---|
| One lap of a 400 m track | 400 m | 0 m | None (back at start) |
| Two lengths of a 50 m pool | 100 m | 0 m | None (back at start) |
| Dog runs 25 m to a ball and brings it back | 50 m | 0 m | None (back at start) |
| Walk 300 m east, then 400 m north | 700 m | 500 m | About 53° north of east |
| Hike 1,200 m east, then 500 m north | 1,700 m | 1,300 m | About 23° north of east |
| Elevator up 12 floors, down 4 (3 m per floor) | 48 m | 24 m | Up |
| Car drives 2 km straight north | 2 km | 2 km | North |
| Source: Computed with Δx = x_f − x_i and the Pythagorean theorem; trip lengths are invented examples · Retrieved October 2026 | |||
How Do You Find Displacement in Two Dimensions?
When motion is not along a single line, treat displacement as an arrow on a map. Break the trip into east-west and north-south parts, add each set separately, then combine them. The total eastward and northward parts form the two short sides of a right triangle, and the displacement is the long side.
Suppose a hiker walks 300 m east and then 400 m north. The distance is 700 m. The displacement is found with the Pythagorean theorem:
How Are Displacement and Velocity Related?
Velocity is built on displacement. Average velocity equals displacement divided by the time taken, so rearranging gives displacement as average velocity times time. Speed, by contrast, uses distance. That is why a runner finishing a full lap has a healthy average speed but an average velocity of zero.
This link is the heart of the difference between speed and velocity. Whenever a problem asks for velocity, start by finding the displacement, not the distance. Our average velocity formula page has more practice with this relationship.
Displacement is tied to velocity through this formula; rearranged, it gives displacement as average velocity times time.
| Symbol | Quantity | SI unit |
|---|---|---|
| average velocity | meter per second (m/s) | |
| displacement | meter (m) | |
| time interval | second (s) |
Rearranged to find another variable:
Valid for: velocity is a vector; Δx is displacement (sign gives direction), not distance.
Example 2 A kayak drifting downstream
A kayak drifts downstream with an average velocity of 1.6 m/s for 420 s. What is its displacement along the river?
- Given:
- average velocity:
- time interval:
- average velocity:
- Formula:
- Substitute:
- Answer:
Average velocity times time gives displacement, not distance, so any back-and-forth wobble along the way is already canceled out.
How Is Displacement Shown on Motion Graphs?
Motion graphs give two ways to read displacement. On a position-time graph, displacement is the change in height of the line between two times. If the line climbs and then falls back, the object moved forward and then returned, and the net displacement is just the final height minus the starting height.
On a velocity-time graph, displacement is the area between the line and the time axis. Area above the axis counts as positive and area below counts as negative, so forward and backward motion can cancel. The two graphs below show the same kind of trip both ways.
Example 3 A cart rolling down a ramp
A lab cart leaves the top of a ramp at 0.4 m/s and speeds up with a constant acceleration of 0.9 m/s². What is its displacement after 2.5 s?
- Given:
- initial velocity:
- elapsed time:
- constant acceleration:
- initial velocity:
- Formula:
- Substitute:
- Answer:
This equation works only when the acceleration stays constant; the first term is the distance from the starting speed alone and the second is the extra from speeding up.


What Are Some Examples of Displacement?
Displacement shows up wherever the end point matters more than the route:
- Navigation: a ship's captain plots the straight-line offset from port to decide a heading, regardless of how the ship zigzagged around storms.
- Elevators: a car that rides up 12 floors and back down 4 ends up 8 floors above where it started, even though it moved past 16 floors in total.
- Sports: a swimmer who swims two lengths of a 50 m pool covers 100 m but finishes with zero displacement at the starting wall.
- Earthquakes: geologists measure how far the ground on one side of a fault has shifted compared with the other side, a displacement that can reach several meters in a large quake.
- Springs: the stretch of a spring from its resting length is a displacement, and it sets how hard the spring pulls back.

Practice Displacement Problems
Try drawing every trip as a single arrow from start to finish before you calculate anything. Our distance and displacement worksheets provide printable problems with answer keys, from simple number-line trips to two-dimensional hikes. When displacement and time are known, the speed, distance and time calculator helps you move on to speed and velocity. Then test yourself with the quiz below.
Common Misconceptions
Myth: Displacement and distance are the same thing.
Physics: Distance counts every meter traveled. Displacement only compares the start and end points and includes a direction, so it is often smaller.
Myth: Displacement can never be negative.
Physics: On a line, a negative displacement simply means the object ended up on the side you chose as negative. Only the size of the displacement is never negative.
Myth: If displacement is zero, the object did not move.
Physics: Zero displacement means the object finished where it began. It may have traveled a long way in between, like a runner completing a lap.
Myth: Displacement depends on the path taken.
Physics: Any path that joins the same start and end points gives the same displacement. Only distance depends on the route.
Key Facts
- Displacement is the straight-line change in position from start to finish, with a direction attached.
- In one dimension it is found with Δx = x_f − x_i, and its SI unit is the meter.
- Displacement is a vector, while distance is a scalar.
- The size of the displacement can never be larger than the distance traveled.
- An object that returns to its starting point has zero displacement, however far it went.
- Average velocity is displacement divided by time, which is why it can be zero even when speed is not.
- On a velocity-time graph, displacement equals the signed area under the line.
Quick Quiz: How Well Do You Know Displacement?
5 questions. Tap an answer to check it.
A runner completes exactly one lap of a 400 m track. What is her displacement?
She finishes where she started, so the straight-line change in position is zero.
A toy car moves from x = 2 m to x = −5 m. What is its displacement?
Δx = x_f − x_i = −5 − 2 = −7 m, so it moved 7 m in the negative direction.
A student walks 6 m east and then 8 m north. What is the size of her displacement?
The two legs are at right angles, so the displacement is the square root of 36 + 64, which is 10 m.
Which statement about distance and displacement is always true?
A straight line is the shortest path, so distance can never be smaller than the size of the displacement.
On a velocity-time graph, what gives the displacement?
Velocity times time is displacement, which is the signed area under the line.
Frequently Asked Questions
What is displacement in simple words?
Displacement is how far you are from where you started, measured in a straight line, plus which way you would point to show it. It does not care about the route. If you walk to a shop 200 m north and come back home, you covered 400 m of distance, but your displacement is zero because you ended up exactly where you began.
What is the formula for displacement?
In one dimension, displacement equals the final position minus the initial position, Δx = x_f − x_i. If you know the average velocity and the time, you can also use Δx = v̄ × Δt. For constant acceleration, Δx = v₀t + ½at² works. In two dimensions, add the east and north parts separately and use the Pythagorean theorem for the total size.
What is the SI unit of displacement?
Displacement is measured in meters, the same unit used for distance and position. Larger trips may be given in kilometers and tiny ones in millimeters or micrometers. Because displacement is a vector, a complete answer also includes a direction, such as 35 m east, 12 m downward, or simply a plus or minus sign when the motion is along one line.
Can displacement be negative?
Yes. When motion is along a line, you choose one direction to be positive. If an object finishes on the opposite side of its starting point, its displacement is negative. A ball rolling 3 m to the left, with right as positive, has a displacement of −3 m. The minus sign shows direction; it does not mean the object moved a negative amount.
Can displacement be zero when distance is not?
Yes, whenever an object returns to its starting point. A swimmer doing one out-and-back length, a pendulum completing a full swing, and a car circling a roundabout back to its entry point all have zero displacement even though each covered real distance. The reverse is impossible: if the distance is zero, the object never moved, so the displacement must be zero too.
Is displacement a scalar or a vector?
Displacement is a vector because it has both a size and a direction. Two trips of the same length in opposite directions have opposite displacements. Distance, its scalar partner, only has a size. Vectors like displacement are added with arrows or components, not with ordinary arithmetic, which is why a 3 m and a 4 m step at right angles combine to 5 m.
Can displacement be greater than distance?
No. The size of the displacement is the length of the straight line between the start and end points, and no path between two points can be shorter than that straight line. So the distance traveled is always equal to or greater than the size of the displacement. They are equal only for motion in one straight line without turning back.
How do you find displacement from a velocity-time graph?
Find the area between the line and the time axis. For a flat line it is a rectangle, velocity times time. For a sloped straight line it is a triangle or trapezoid. Area above the axis is positive displacement and area below is negative, so add them with their signs. The total is the net displacement over that time interval.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








