
At a Glance
A velocity-time (v-t) graph shows velocity in m/s against time in s. The slope gives acceleration, a = Δv / Δt, and the area under the line gives displacement in meters, with area below the time axis counting as negative.
- Vertical axis
- Velocity v (m/s)
- Horizontal axis
- Time t (s)
- Slope means
- Acceleration, a = Δv/Δt (m/s²)
- Area means
- Displacement Δx (m)
- Flat line
- Constant velocity, zero acceleration
- Below the axis
- Moving in the negative direction
On this page
- What Is a Velocity-Time Graph?
- Velocity-Time Graphs Explained Simply
- Why Does the Slope of a Velocity-Time Graph Equal Acceleration?
- How Do You Find Displacement From a Velocity-Time Graph?
- What Do the Different Shapes of a Velocity-Time Graph Mean?
- What Happens When a Velocity-Time Graph Crosses the Time Axis?
- How Do You Read a Velocity-Time Graph Step by Step?
- How Do You Read a Curved Velocity-Time Graph?
- What Are Some Real-Life Examples of Velocity-Time Graphs?
- How Is a Velocity-Time Graph Different From a Position-Time Graph?
- Practice Velocity-Time Graph Problems
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Velocity-Time Graph?
A velocity-time graph is a chart with time running along the horizontal axis and velocity running up the vertical axis. Each point tells you how fast the object was moving, and in which direction, at one moment. Join the points and you get a line that tells the whole story of the motion.
Two features carry most of the information. The slope of the line shows how quickly the velocity is changing, which is the acceleration. The area between the line and the time axis shows how far the object moved, which is the displacement. Learning to read both is the key skill on this page.
A velocity-time graph is one of the three standard motion graphs, alongside the position-time graph and the acceleration-time graph. Students often call it a v-t graph, and in some courses it appears as a speed-time graph when direction does not matter.
Velocity-Time Graphs Explained Simply
Picture a car's speedometer needle and imagine drawing its position on paper every second as the car drives. That drawing is a velocity-time graph. When the needle climbs, the line climbs. When the needle holds still, the line goes flat. When the driver brakes, the line drops.
So the shape of the line is a record of the gas pedal and the brake. Uphill parts mean speeding up, flat parts mean cruising, and downhill parts mean slowing down. The steeper any part is, the harder the driver was pressing.
The space under the line is the distance covered. A long, high stretch of line means the car was going fast for a long time, so it covered a lot of road.
Why Does the Slope of a Velocity-Time Graph Equal Acceleration?
Slope is rise over run. On a v-t graph, the rise is a change in velocity, Δv, and the run is a change in time, Δt. Rise over run is therefore
To find the slope of a straight section, pick two points on it that are far apart and easy to read. Subtract the earlier velocity from the later one, subtract the earlier time from the later one, and divide. A positive answer means the velocity is increasing in the positive direction; a negative answer means it is decreasing.
A steeper line means a bigger acceleration, and a horizontal line has zero slope, so zero acceleration. Notice what slope does not tell you: a line can be high on the graph, showing a large velocity, and still be perfectly flat.
The slope of a velocity-time graph is the acceleration formula in graph form. Here it is with each variable and its SI unit.
| Symbol | Quantity | SI unit |
|---|---|---|
| average acceleration | meter per second squared (m/s²) | |
| change in velocity | meter per second (m/s) | |
| time interval | second (s) |
Rearranged to find another variable:
Example 1 Slope of a bus pulling away
On a velocity-time graph, a bus's line rises from 0 m/s at t = 0 s to 12 m/s at t = 6 s as a straight line. What acceleration does the slope show?
- Given:
- change in velocity:
- time interval:
- change in velocity:
- Formula:
- Substitute:
- Answer:
A straight rising line means this acceleration was the same for the whole six seconds.
How Do You Find Displacement From a Velocity-Time Graph?
The area between the line and the time axis equals the displacement. The reason is simple: displacement is velocity multiplied by time, and on this graph velocity is a height while time is a width. Height times width is an area.
For straight-line graphs, split the region into rectangles and triangles. A rectangle under a flat line has area
Area below the time axis counts as negative, because there the object moves in the negative direction. Add all the signed areas to get the displacement. If you want the total distance traveled instead, add the sizes of the areas and ignore the signs.
Example 2 Area under a sloping line
A scooter's velocity-time graph is a straight line from 4 m/s at t = 0 s to 16 m/s at t = 8 s. Using the area of the trapezoid under the line, how far does the scooter travel in those 8 s?
- Given:
- initial velocity:
- final velocity:
- elapsed time:
- initial velocity:
- Formula:
- Substitute:
- Answer:
The trapezoid area, half the sum of the two parallel sides times the width, is exactly the kinematic equation Δx = ½(v0 + v)t.
What Do the Different Shapes of a Velocity-Time Graph Mean?
Most v-t graphs in school physics are built from a few basic shapes. Once you recognize them, you can describe a motion at a glance. The table below lists the common ones and what each one tells you about the object.
The diagram that follows shows a city bus that speeds up from rest, cruises and then brakes to a stop. The shaded areas give the distance covered in each stage, and the triangle on the first stage measures the slope.
| Shape of the line | Velocity | Acceleration | What the object is doing |
|---|---|---|---|
| Flat line on the time axis | Zero | Zero | Standing still |
| Flat line above the axis | Constant, positive | Zero | Moving steadily in the positive direction |
| Flat line below the axis | Constant, negative | Zero | Moving steadily in the negative direction |
| Straight line rising, above the axis | Positive and increasing | Positive, constant | Speeding up in the positive direction |
| Straight line falling, above the axis | Positive and decreasing | Negative, constant | Slowing down in the positive direction |
| Straight line falling, below the axis | Negative, growing in size | Negative, constant | Speeding up in the negative direction |
| Straight line crossing the axis | Changes sign | Constant | Stops for an instant and reverses |
| Curve that flattens out | Increasing more slowly | Positive but shrinking | Approaching a top speed |
| Source: Follows from a = Δv/Δt (slope) and Δx = area under the line · Retrieved October 2026 | |||

What Happens When a Velocity-Time Graph Crosses the Time Axis?
When the line crosses the time axis, the velocity passes through zero and changes sign. The object stops for an instant and then reverses direction. A ball thrown straight up is the classic case: its velocity starts positive, falls steadily, reaches zero at the top and then becomes negative as the ball falls back.
For a ball thrown upward at 12 m/s with up as positive, the graph is a straight line sloping down at −9.81 m/s², the acceleration due to gravity. It crosses zero after about 1.2 s (computed as 12 ÷ 9.81), which is the moment the ball is highest. The slope never changes, even at the top, because gravity keeps pulling down the whole time.
This explains a common surprise: the ball is accelerating at its highest point, even though its velocity is zero there for an instant. The second diagram shows the full line with the area above and below the axis shaded.

How Do You Read a Velocity-Time Graph Step by Step?
- Check the axes and units. Make sure the vertical axis is velocity, not position, and note whether time is in seconds, minutes or hours.
- Split the graph into stages. Each straight section is one stage of constant acceleration.
- Read the velocities. Note the velocity at the start and end of each stage, and whether it is above or below the axis.
- Find each slope. Divide the change in velocity by the change in time to get the acceleration for that stage.
- Find each area. Use rectangles, triangles and trapezoids, giving areas below the axis a minus sign.
- Describe the motion in words. For example: "It sped up for 6 s, cruised for 10 s, then braked for 4 s and stopped 180 m from the start."
The same method works for any straight-line graph. If you know where the line starts and how steep it is, you can also predict the velocity at a later time without reading it off the graph.
Example 3 Reading ahead along a straight line
A cyclist's velocity-time graph starts at 3 m/s and rises in a straight line with a slope of 1.5 m/s² for 6 s. What velocity does the graph show at t = 6 s?
- Given:
- initial velocity:
- constant acceleration:
- elapsed time:
- initial velocity:
- Formula:
- Substitute:
- Answer:
(43.2 km/h, 26.84 mph)
Starting value plus slope times time is the equation of the straight line, written as v = v0 + at.
| Stage | Time (s) | Velocity (m/s) | Slope: acceleration (m/s²) | Area: displacement (m) |
|---|---|---|---|---|
| Speeding up | 0 to 6 | 0 → 12 | 2 | 36 |
| Cruising | 6 to 16 | 12 → 12 | 0 | 120 |
| Braking | 16 to 20 | 12 → 0 | −3 | 24 |
| Whole trip | 0 to 20 | 0 → 0 | average 0 | 180 |
| Source: Computed with a = Δv/Δt and the area of each triangle or rectangle for an invented bus trip · Retrieved October 2026 | ||||
How Do You Read a Curved Velocity-Time Graph?
A curved v-t graph means the acceleration is changing. A sprinter coming out of the blocks gives a curve that is steep at first and gradually levels off, because the runner gains speed quickly at the start and more slowly near top speed. A skydiver's graph looks similar as air resistance builds up toward terminal velocity.
To find the acceleration at one instant on a curve, draw a tangent line that just touches the curve at that point and measure its slope. To find the displacement, estimate the area by counting grid squares or by splitting it into thin strips. Calculus does this exactly: acceleration is the derivative of velocity, and displacement is its integral, as shown on our kinematics with calculus page.

What Are Some Real-Life Examples of Velocity-Time Graphs?
Engineers use velocity-time graphs every day, even when they call them something else. Car makers test acceleration by plotting velocity against time, and the time to reach highway speed is simply where the curve crosses a chosen velocity. Train schedulers design smooth trapezoid-shaped profiles so passengers are not jolted at departure and arrival.
Elevators follow a similar trapezoid: a gentle speed-up, a steady run between floors and a gentle slow-down. Fitness trackers and phone apps record a runner's velocity over a session, and the area under that curve is the distance on the summary screen. In crash testing, a very steep drop on the v-t graph shows the huge deceleration a seat belt and air bag must spread out.
The idea is older than graph paper. Galileo Galilei timed balls rolling down gentle ramps and found that their velocity grew by equal amounts in equal times, which is a straight rising line on what we now call a velocity-time graph.
How Is a Velocity-Time Graph Different From a Position-Time Graph?
The two graphs can look alike but mean different things, which is a frequent source of mistakes. On a position-time graph, a flat line means the object is standing still. On a velocity-time graph, a flat line means the object is moving at a constant velocity, which could be very fast.
The graphs are linked by slope and area. The slope of the position-time graph gives the height of the velocity-time graph, and the slope of the velocity-time graph gives the height of the acceleration-time graph. Going the other way, the area under each graph gives the change in the one before it. Seeing the three side by side, as on our motion graphs page, makes these links clear. For more on the two quantities themselves, see velocity vs acceleration.
Practice Velocity-Time Graph Problems
Reading v-t graphs becomes quick with practice. Our velocity-time graph worksheets provide printable graphs to analyze, with answer keys. Check slopes with the acceleration calculator, review the constant-acceleration equations on the kinematics formulas sheet, and then try the quiz below.
Common Misconceptions
Myth: A flat line on a velocity-time graph means the object is not moving.
Physics: A flat line means the velocity is not changing. The object is at rest only if that flat line lies on the time axis.
Myth: A line sloping downward means the object is moving backward.
Physics: A downward slope means negative acceleration. The object moves backward only where the line is below the time axis.
Myth: The highest point on the graph is where the object is farthest away.
Physics: The highest point is where the object is fastest. Its distance from the start comes from the area under the line, which keeps growing as long as the velocity stays positive.
Myth: When the velocity is zero, the acceleration must also be zero.
Physics: A thrown ball has zero velocity at the top of its flight, yet the graph still slopes down there because gravity keeps accelerating it.
Key Facts
- A velocity-time graph plots velocity on the vertical axis against time on the horizontal axis.
- The slope of a velocity-time graph equals the acceleration, a = Δv/Δt.
- The area between the line and the time axis equals the displacement.
- Area below the time axis counts as negative displacement.
- A horizontal line means constant velocity and zero acceleration, not that the object is at rest.
- Where the line crosses the time axis, the object stops for an instant and reverses direction.
- A curved line means the acceleration is changing, and a tangent gives the acceleration at one moment.
Quick Quiz: How Well Do You Know Velocity-Time Graphs?
6 questions. Tap an answer to check it.
What does the slope of a velocity-time graph give you?
Slope is Δv/Δt, which is the definition of acceleration.
A velocity-time graph shows a flat line at 8 m/s for 5 s. How far does the object travel?
The area of the rectangle is 8 m/s × 5 s = 40 m.
What does a horizontal line above the time axis mean?
No slope means no acceleration, so the velocity stays constant.
A velocity-time graph rises in a straight line from 0 to 10 m/s in 4 s. What is the acceleration?
Slope = 10 m/s ÷ 4 s = 2.5 m/s².
What happens where a velocity-time graph crosses the time axis?
Velocity passes through zero and changes sign, so the object stops for an instant and turns back.
How is the area below the time axis treated when finding displacement?
Below the axis the object moves in the negative direction, so that area is negative displacement.
Frequently Asked Questions
What does a velocity-time graph show?
A velocity-time graph shows how an object's velocity changes over time. Reading the height of the line tells you the velocity at each moment, the slope tells you the acceleration, and the area under the line tells you the displacement. It also shows direction: parts of the line above the time axis are motion in the positive direction, and parts below are motion in the negative direction.
What does the slope of a velocity-time graph represent?
The slope represents acceleration. Slope is rise over run, and on this graph the rise is a change in velocity while the run is a change in time, so the slope is Δv divided by Δt. A steep slope means a large acceleration, a flat line means zero acceleration, and a downward slope means negative acceleration. The unit is meters per second squared.
What does the area under a velocity-time graph represent?
The area between the line and the time axis represents displacement. Velocity times time gives displacement, and on the graph that product is a height times a width, which is an area. Areas above the axis count as positive and areas below count as negative. If you add the sizes of all areas without signs, you get the total distance traveled instead.
How do you calculate acceleration from a velocity-time graph?
Choose two points on a straight part of the line. Subtract the first velocity from the second to get the change in velocity, and subtract the first time from the second to get the change in time. Divide the change in velocity by the change in time. For example, a rise from 2 m/s to 8 m/s over 3 s gives an acceleration of 2 m/s².
What does a horizontal line on a velocity-time graph mean?
A horizontal line means the velocity is constant, so the acceleration is zero. If the line sits above the axis, the object is moving steadily in the positive direction; if it sits below, it is moving steadily in the negative direction. Only a horizontal line lying right on the time axis means the object is at rest.
What does a negative velocity on a velocity-time graph mean?
A negative velocity, shown by the line dipping below the time axis, means the object is moving in the direction you chose as negative. It does not mean the object is slowing down. The area under that part of the line counts as negative displacement, so it subtracts from the object's overall progress in the positive direction.
How is a velocity-time graph different from a speed-time graph?
A speed-time graph shows only how fast the object moves, so it never goes below the time axis. A velocity-time graph includes direction, so it can show negative values when the object moves the other way. For motion in one direction only, the two graphs look the same. When the object reverses, the velocity graph crosses the axis while the speed graph bounces off it.
Can you find distance traveled from a velocity-time graph?
Yes. Find the area of each part of the region between the line and the time axis, and add their sizes while ignoring the signs. That gives the total distance traveled. If you keep the signs, with areas below the axis counted as negative, you get the displacement instead, which can be smaller when the object turns back.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








