
At a Glance
A frame of reference is the point of view, with an origin, directions and a clock, from which motion is measured. Velocities change when you switch frames: in everyday physics, the velocity of A relative to C equals v_AC = v_AB + v_BC.
- What it is
- Origin + axes + clock used to measure motion
- Main types
- Inertial (not accelerating) and non-inertial (accelerating)
- Changing frames
- vAC = vAB + vBC (everyday speeds)
- Same in all inertial frames
- Acceleration, forces, laws of motion
- Differs between frames
- Position, velocity, kinetic energy, path shape
On this page
- What Is a Frame of Reference in Physics?
- Frame of Reference Explained Simply
- What Do You Need to Set Up a Frame of Reference?
- What Is the Difference Between Inertial and Non-Inertial Frames?
- How Do Velocities Change When You Switch Frames?
- Why Can Two Observers See Different Paths?
- What Are Examples of Frames of Reference?
- Is the Ground Really at Rest?
- Going Deeper: Galileo, Einstein and Relativity
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Frame of Reference in Physics?
A frame of reference is the setup you use to describe where things are and how they move. It has three parts: an origin, which is the zero point for position; a set of axes that fix the directions, such as east, north and up; and a clock that measures time. Usually the frame is attached to some object, like the ground, a car or a spacecraft.
Motion only makes sense relative to a frame. Saying a cup of coffee on an airplane tray is at rest is true for the passenger, because it is not moving relative to the plane. Saying it is moving at about 250 m/s is also true, for someone on the ground. Neither statement is wrong; they use different frames.
In most school problems the frame is the ground, and it is so familiar that nobody mentions it. Physics becomes much clearer once you notice that this choice is always being made, even when it is silent.
Frame of Reference Explained Simply
Think of a frame of reference as the spot you are watching from. If you sit in a car and look at your friend in the passenger seat, your friend is not moving. If you stand on the sidewalk and watch the same car drive by, your friend is moving quite fast.
Both views are correct. Motion is always relative to something. When you say a thing is moving, you are really saying it is changing position compared with you, or with the ground, or with whatever you chose to watch from.
What Do You Need to Set Up a Frame of Reference?
To set up a frame for a problem, make three choices and write them down:
- Pick an origin. It could be a starting line, a lamp post or the center of the Earth.
- Pick positive directions. For straight-line motion, one axis is enough; say whether right or left, up or down, counts as positive.
- Pick a starting time. Usually t = 0 is the moment something begins to move.
With those three choices, every displacement and velocity in the problem gets a definite sign. Moving the origin changes the numbers for position, but it does not change displacements or velocities. Flipping the positive direction flips every sign. Keeping the same frame throughout a problem is the single habit that prevents the most sign errors.
What Is the Difference Between Inertial and Non-Inertial Frames?
An inertial frame is one that is not accelerating: it is at rest or moving in a straight line at constant speed. In an inertial frame, Newton's first law holds exactly. An object with no net force on it stays at rest or keeps moving in a straight line. The term is defined more formally on our inertial reference frame glossary page.
A non-inertial frame is accelerating, speeding up, slowing down or turning. Inside a bus that brakes hard, a loose water bottle slides forward even though nothing pushed it. From the road, the explanation is simple: the bottle kept moving because of its inertia while the bus slowed beneath it. From inside the bus, it looks as if a mysterious force appeared.
Physicists call these apparent pushes fictitious forces. The outward pull you feel on a turning merry-go-round is one of them. They are useful bookkeeping in accelerating frames, but they do not come from any real interaction between objects.
How Do Velocities Change When You Switch Frames?
To move from one frame to another, you add velocities. If A moves relative to B, and B moves relative to C, then the velocity of A relative to C is
Accelerations do not change when you switch between two inertial frames, because the frames move at constant velocity relative to each other. That is why the laws of motion look the same in a smoothly cruising train and on the platform. Velocity, position and kinetic energy, on the other hand, all depend on the frame.
The full method for combining moving objects, including boats crossing rivers and planes in crosswinds, is on our relative velocity page. For two-dimensional problems, the vector addition calculator handles the arithmetic.
Switching between two frames that move relative to each other uses the velocity addition rule below, valid at speeds far below the speed of light.
| Symbol | Quantity | SI unit |
|---|---|---|
| velocity of A relative to C | meter per second (m/s) | |
| velocity of A relative to B | meter per second (m/s) | |
| velocity of B relative to C | meter per second (m/s) |
Rearranged to find another variable:
Valid for: vector addition; in 1D use signed values. Classical (v << c).
Example 1 Walking forward on a train
A train moves east along a straight track at 27 m/s relative to the ground. A passenger walks toward the front of the train at 1.3 m/s relative to the train. Taking east as positive, what is the passenger's velocity relative to the ground?
- Given:
- velocity of A relative to B:
- velocity of B relative to C:
- velocity of A relative to B:
- Formula:
- Substitute:
- Answer:
(101.88 km/h, 63.31 mph)
A person on the platform sees the passenger move slightly faster than the train, while a seated passenger sees an ordinary walking pace.
Example 2 A ball thrown backward from a truck
A worker standing on the back of a flatbed truck throws a ball straight backward at 15 m/s relative to the truck. The truck is moving forward at 15 m/s relative to the road. Taking forward as positive, what is the ball's velocity relative to the road?
- Given:
- velocity of A relative to B:
- velocity of B relative to C:
- velocity of A relative to B:
- Formula:
- Substitute:
- Answer:
Someone at the roadside sees the ball leave the hand with no horizontal motion at all; it simply drops straight down.

Why Can Two Observers See Different Paths?
The shape of a path depends on the frame too. Drop a key on a smoothly moving train and it falls straight down to your feet. A person standing beside the track sees the same key move forward with the train while it falls, so its path is a curve, the same shape as a ball thrown horizontally. Both observers agree on when the key lands and on its downward acceleration.
The diagram below shows the ground observer's view of a key dropped from about 1 m above the floor of a train moving at 27 m/s. A related effect appears when you overtake another vehicle. From your car, a slower truck ahead seems to drift backward toward you, even though both are moving forward relative to the road.
Example 3 Where does the dropped key land?
A passenger on the same 27 m/s train drops a key, which takes 0.45 s to fall to the floor. In the ground frame, the key keeps the train's horizontal speed while it falls. How far does it travel horizontally relative to the ground during the fall?
- Given:
- average speed:
- elapsed time:
- average speed:
- Formula:
- Substitute:
- Answer:
In the train frame the key falls straight down and lands at the passenger's feet. In the ground frame it travels more than 12 m sideways, tracing a curved path.

What Are Examples of Frames of Reference?
Frames of reference show up all the time once you look for them:
- Sitting at a desk. You are at rest relative to the room, but Earth's spin carries you east at hundreds of meters per second, depending on your latitude.
- Escalators and moving walkways. Walking on one, you move faster relative to the building than relative to the walkway.
- Rain on a car window. Rain falling straight down appears to slant toward you when you drive, because your frame is moving forward.
- Air travel. A plane's airspeed is measured in the frame of the air, while its ground speed is measured relative to the Earth. Wind makes the two differ.
- Space missions. Engineers describe a spacecraft's motion relative to Earth, the Moon or the Sun, depending on which body matters for the next step.

Is the Ground Really at Rest?
Not quite. The ground is a convenient frame, but it spins with the Earth and travels around the Sun. At the equator, the rotation alone carries the surface east at about 465 m/s; the speed falls toward the poles, as the table shows. On top of that, Earth orbits the Sun at roughly 30 km/s.
We do not feel any of this, because these motions are almost steady. Changes in direction are slow enough that the ground behaves very nearly like an inertial frame for everyday experiments. The small leftover effects show up only in large or long-running systems, such as the rotation of hurricanes or the slow swing of a very long pendulum.
| Latitude | Speed (m/s) | Speed (km/h) | Speed (mph) |
|---|---|---|---|
| 0° (equator) | 465 | 1,674 | 1,040 |
| 15° | 449 | 1,617 | 1,005 |
| 30° | 403 | 1,450 | 901 |
| 45° | 329 | 1,184 | 736 |
| 60° | 233 | 837 | 520 |
| 75° | 120 | 433 | 269 |
| 90° (pole) | 0 | 0 | 0 |
| Source: Computed with v = 2πR cos(latitude) / T, using an equatorial radius of about 6,378 km and a sidereal day of about 86,164 s; Earth treated as a sphere · Retrieved October 2026 | |||
Going Deeper: Galileo, Einstein and Relativity
The idea that uniform motion cannot be detected from inside goes back to Galileo Galilei. In his 1632 Dialogue, he described how butterflies, dripping water and thrown objects behave exactly the same in the closed cabin of a smoothly sailing ship as in a ship at anchor. This principle, that the laws of motion are the same in every inertial frame, is called Galilean relativity.
In 1905 Albert Einstein kept the principle but added a second rule: light travels at the same speed in every inertial frame. The simple velocity addition rule then has to be replaced at very high speeds, and time and length themselves depend on the frame. Our pages on special relativity and relativistic velocity addition explain how. At everyday speeds, the classical rule on this page is accurate to far better than any ordinary measurement.
Common Misconceptions
Myth: There is one true, absolute speed for every object.
Physics: Speed and velocity are always measured relative to a chosen frame. No single frame is the true one; physics just asks you to choose one and stay consistent.
Myth: If you feel pushed back in your seat, a real backward force is acting on you.
Physics: The car's frame is accelerating. From the road, the seat pushes you forward to speed you up; the backward push you feel is a fictitious force of the accelerating frame.
Myth: A ball dropped on a moving train lands behind the person who dropped it.
Physics: If the train moves at steady velocity, the ball already shares the train's motion and lands at the person's feet. It only lands behind if the train speeds up during the fall.
Myth: The ground is a perfect inertial frame.
Physics: Earth spins and orbits the Sun, so the ground is only approximately inertial. The approximation is excellent for everyday experiments but shows up in large-scale effects.
Key Facts
- A frame of reference is the origin, axes and clock used to measure position and motion.
- Motion is always relative: the same object can be at rest in one frame and moving in another.
- Inertial frames are not accelerating, and Newton's laws hold in them without extra forces.
- In accelerating frames, objects seem to be pushed by fictitious forces that have no physical source.
- At everyday speeds, velocities between frames combine by simple addition: v_AC = v_AB + v_BC.
- Velocity, position, path shape and kinetic energy depend on the frame, while accelerations agree between inertial frames.
- The ground is nearly inertial, even though Earth's rotation moves the equator at about 465 m/s.
Quick Quiz: How Well Do You Know Frame of Reference?
6 questions. Tap an answer to check it.
What three things make up a frame of reference?
A frame needs a zero point, directions and a way to measure time.
A passenger walks forward at 2 m/s on a train moving at 20 m/s. What is her speed relative to the ground?
Both velocities point the same way, so they add: 2 + 20 = 22 m/s.
Which of these is the best example of a non-inertial frame?
Turning means the velocity is changing direction, so the car's frame is accelerating.
Which quantity is the same in two inertial frames that move relative to each other?
A constant relative velocity shifts all velocities equally, so their rates of change agree.
A key is dropped on a smoothly moving train. Where does it land, as seen by the passenger?
The key already shares the train's velocity, so in the train frame it falls straight down.
Who first described how motion inside a smoothly sailing ship looks the same as on land?
Galileo used the closed ship cabin example in his 1632 Dialogue.
Frequently Asked Questions
What is a frame of reference in simple words?
A frame of reference is the place you are watching motion from, along with a starting point, directions and a clock. A passenger on a bus and a person on the sidewalk use different frames. The passenger sees the driver sitting still; the person outside sees the driver moving down the street. Both descriptions are correct within their own frame.
Why is a frame of reference important in physics?
Because position, velocity and kinetic energy all depend on it. A problem only has a definite answer once the frame is chosen. Stating the frame clearly prevents sign mistakes and confusion, and choosing a clever frame can turn a hard problem into an easy one, such as solving a collision in the frame where one object starts at rest.
What is an inertial frame of reference?
An inertial frame is one that is not accelerating. It is either at rest or moving in a straight line at constant speed. In an inertial frame, an object with no net force on it keeps a constant velocity, exactly as Newton's first law says. A smoothly cruising train and the ground are both good approximations of inertial frames.
What is a non-inertial frame of reference?
A non-inertial frame is one that is accelerating, such as a car speeding up, a bus braking or a carousel spinning. In these frames, objects appear to be pushed by forces with no physical source, like the push back into your seat during takeoff. These are called fictitious forces, and they disappear when you describe the motion from an inertial frame.
What are some examples of frames of reference?
Common examples are the ground, a moving car, a train carriage, an airplane cabin, the surface of the Earth, the center of the Earth and the Sun. Any object can serve as a frame, as long as you attach an origin, directions and a clock to it. The best choice is usually the one that makes the motion simplest to describe.
Is the Earth an inertial frame of reference?
Only approximately. Earth rotates once a day and orbits the Sun once a year, so the ground is slowly accelerating. For a ball thrown across a room, these effects are far too small to notice, so treating the ground as inertial works well. For long-range artillery, ocean currents or hurricanes, the rotation of the Earth has to be included.
Does acceleration depend on the frame of reference?
Not between inertial frames. If two frames move at constant velocity relative to each other, they disagree about an object's velocity by a fixed amount, but they agree about how fast that velocity is changing. If one of the frames is itself accelerating, though, the measured accelerations differ, which is where fictitious forces come from.
How do you change from one frame of reference to another?
At everyday speeds you add velocities. If an object moves at v_AB relative to frame B, and frame B moves at v_BC relative to frame C, then the object moves at v_AC = v_AB + v_BC relative to C. In one dimension, add the signed values. In two or three dimensions, add the velocities as vectors, component by component.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








