The law of inertia

Newton's First Law of Motion (Inertia)

Newton's first law of motion says that a resting object remains still, and a moving object continues along a straight line at a steady speed, unless a net external force acts on it. In other words, forces are needed to change motion, not to keep it going. The law is also called the law of inertia, and Isaac Newton published it in 1687.

Curling stone gliding across smooth ice, an example of Newton's first law where little force acts to change its motion
With very little friction to slow it, a curling stone keeps sliding at nearly constant velocity, just as the first law predicts.

At a Glance

Newton's first law says that if the net force on an object is zero, its velocity does not change: a resting object stays put and a moving object keeps the same speed and direction. In symbols, if ΣF = 0 then v is constant, which is the special case of F_net = m a with a = 0.

Stated by
Isaac Newton
Published
1687, in the Principia
Statement
ΣF = 0 means velocity stays constant
Also called
The law of inertia
Built on
Earlier ideas of Galileo and Descartes
Applies to
Motion seen from an inertial (non-accelerating) reference frame
On this page
  1. What Does Newton's First Law Say?
  2. Newton's First Law Explained Simply
  3. Is There a Formula for Newton's First Law?
  4. What Happens When Forces Are Balanced?
  5. What Are Examples of Newton's First Law in Everyday Life?
  6. How Does the First Law Explain Seat Belts?
  7. Who Discovered the Law of Inertia?
  8. Going Deeper: Why Does the First Law Need an Inertial Frame?
  9. Does Newton's First Law Have Limits?
  10. How Can You Practice Newton's First Law?
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Does Newton's First Law Say?

The first law makes a bold claim: motion does not need a cause, but changes in motion do. An object left alone will keep whatever velocity it has. If that velocity is zero, the object stays at rest. If it is 20 m/s due north, it keeps going 20 m/s due north forever.

The phrase "left alone" has a precise meaning. It means the net force is zero, either because no forces act or because the forces that do act cancel each other out. A book on a shelf feels gravity and the shelf's upward push, but they balance, so the book stays put.

The law gets its nickname from inertia, the property of matter that resists changes in motion. It is the first of Newton's three laws of motion and sets the stage for the other two.

Newton's First Law Explained Simply

Think of a soccer ball sitting on the grass. It will not roll away unless something kicks it. Once kicked, it rolls, and the only reason it eventually stops is that the grass and the air slowly drag it back.

Now picture that same kick on a smooth sheet of ice. The ball glides much farther, because the forces slowing it are much weaker. Newton's insight was to imagine taking those forces away completely. Then the ball would never stop.

So the first law in plain words: things keep doing what they are doing until a push or pull makes them change.

Is There a Formula for Newton's First Law?

The first law is usually written as a condition rather than an equation to solve: ∑F→=0⇒v→=constant. The capital sigma means "add up all the forces as vectors."

Mathematically, this is the zero-force case of the second law, Fnet = ma. If Fnet is zero, the acceleration is zero, and an object with zero acceleration has a constant velocity. That does not make the first law redundant, though. Its real job is to define the kind of viewpoint (an inertial frame) in which the second law works at all.

The first law has no separate equation of its own. It is what Newton's second law says when the net force is zero: set F_net to zero and the acceleration must be zero too.

Fnet=ma
What each symbol means
SymbolQuantitySI unit
Fnetnet external forcenewton (N)
mmasskilogram (kg)
aaccelerationmeter per second squared (m/s²)

Valid for: constant mass, inertial reference frame; vector equation (a points along F_net).

Example 1 A car on cruise control

A car holds a steady 27 m/s on a straight, level highway. Its tires push it forward with 2,400 N while air resistance and rolling friction together push back with 2,400 N. What is the net horizontal force on the car (forward positive)?

  1. Given:
    • F_drive: Fdrive=2,400 N
    • F_resist: Fresist=2,400 N
  2. Formula: Fnet=ma
  3. Substitute: Fdrive=2,400 N,Fresist=2,400 N
  4. Answer: Fnet=0 N

Zero net force is exactly why the speed stays constant. The engine is not there to keep the car moving, only to cancel the forces that would slow it down.

What Happens When Forces Are Balanced?

When the forces on an object are balanced, the first law says its velocity does not change. This covers two situations that look different but are physically the same: sitting still and moving at a steady speed in a straight line.

A lamp hanging from two cords is a good example of the first case. Each cord pulls up and sideways, gravity pulls down, and the three forces add to zero, as the diagram shows. An elevator rising smoothly between floors is the second case: the cable and gravity cancel, so the elevator neither speeds up nor slows down.

Our page on balanced and unbalanced forces works through more of these cases, and a free-body diagram is the best way to check whether the forces really cancel.

Example 3 An elevator rising at constant speed

An elevator car with a total mass of 800 kg rises at a steady speed between floors. How large is its weight, which the cable tension must exactly match? Use g = 9.8 m/s².

  1. Given:
    • mass: m=800 kg
    • acceleration due to gravity: g=9.8 m/s2
  2. Formula: W=mg
  3. Substitute: W=(800 kg)(9.8 m/s2)
  4. Answer: W=7,840 N

Because the velocity is constant, the first law tells us the net force is zero, so the cable pulls up with exactly this force, no more and no less.

Hanging lamp held by two cords at 30 degrees above horizontal, three 50 N forces adding tip to tail into a closed triangle
The two cord tensions and the lamp's weight close into a loop when added tip to tail, so the net force is zero and the lamp stays at rest.

What Are Examples of Newton's First Law in Everyday Life?

  • Bus passengers: when a bus pulls away, standing riders tip backward because their bodies stay at rest while the floor moves forward.
  • Hockey puck: a puck glides a long way on ice because there is very little friction to change its velocity.
  • Coin and card: flick a card out from under a coin resting on a cup, and the coin drops straight down instead of flying off with the card.
  • Spacecraft: probes travel between planets for years with their engines off, coasting on their existing velocity.
  • Groceries in a trunk: bags slide forward when the driver brakes and toward the outside on a turn.
  • Hammer head: tapping the handle end on the ground drives a loose head farther onto the handle, because the head keeps moving after the handle stops.

We collect many more on our page of Newton's first law examples.

What Newton's first law predicts in common situations
SituationNet forceVelocityWhat you observe
Book resting on a shelfZeroStays zeroBook does not move
Car on cruise control, straight roadZeroConstantSteady speed and direction
Skydiver at terminal velocityZeroConstantNo further speeding up
Puck sliding on smooth iceNearly zeroNearly constantGlides a long distance
Car brakingBackwardDecreasingPassengers lean forward
Bus pulling awayForward on the bus onlyBus speeds upStanding riders tip backward
Car rounding a curveToward the centerChanging directionLoose objects slide outward
Source: Descriptive summary of Newton's first law; no measured values · Retrieved October 2026
A blank card flicked off a glass while a plain metal disc drops straight into the glass, a classic first law demonstration
The card is flicked away so fast that the disc barely moves sideways, so it falls straight into the glass.

How Does the First Law Explain Seat Belts?

In a collision, the car stops in a fraction of a second, but nothing is acting on the passenger's body yet. By the first law, the passenger keeps moving forward at the car's original speed. The seat belt is the force that changes that motion, and it does so while the body is still in the seat.

The belt also stretches slightly, which lengthens the stopping time and lowers the force. The worked example below shows why the force is still very large even with a belt. Read more about how belts, airbags and crumple zones share this job on the car safety features page.

Example 2 Why the seat belt matters

A 70 kg passenger is moving at 15 m/s when the car stops suddenly. If a seat belt brings the passenger to rest in 0.12 s, what average net force must it apply?

  1. Given:
    • mass: m=70 kg
    • Δv: Δv=15 m/s
    • Δt: Δt=0.12 s
  2. Formula: Fnet=ma
  3. Substitute: m=70 kg,Δv=15 m/s,Δt=0.12 s
  4. Answer: Fnet=8,750 N

That is many times the passenger's weight. Without a belt, the body keeps moving at 15 m/s until the dashboard or windshield stops it in a far shorter time, with a far larger force.

Free-body diagram of a braking car with a 9,000 N backward friction force and no forward force, so the car slows down
When a car brakes, the only horizontal force on it points backward, so the car slows while unbelted passengers keep going.

Who Discovered the Law of Inertia?

For many centuries, the common view held that every motion needs something pushing it, and that objects naturally come to rest. Everyday experience seemed to agree, because friction is almost always present.

Galileo Galilei broke with this view in the early 1600s. Rolling balls down one ramp and up another, he noticed that a ball climbed back to nearly its starting height no matter how shallow the second ramp was. He reasoned that on a level, frictionless surface the ball would never stop. You can try a version of this with our Galileo inclined plane experiment.

René Descartes added that free motion follows a straight line. Isaac Newton then stated the idea as the first of his laws of motion in the Principia of 1687, making it the foundation of classical mechanics.

Going Deeper: Why Does the First Law Need an Inertial Frame?

The first law only holds when you observe from a reference frame that is not accelerating. Sit in a car that is speeding up and a ball on the floor seems to roll backward with no force on it. The law looks broken, but it is the car, not the ball, that is accelerating.

A frame where the first law works is called an inertial reference frame. The ground is a very good approximation for everyday problems, even though Earth spins and orbits the Sun. In an accelerating frame, physicists add fictitious forces to make the bookkeeping work.

Does Newton's First Law Have Limits?

The first law is extremely reliable for everyday objects. It needs care in two places. At speeds close to the speed of light, special relativity changes how motion and force relate, although a body with no net force still moves in a straight line at constant speed. On the scale of atoms, quantum mechanics replaces the idea of a sharp path.

It is also easy to misuse the law by forgetting hidden forces. A rolling ball that slows down is not breaking the law; friction and air resistance are acting on it.

How Can You Practice Newton's First Law?

Our printable Newton's laws worksheets include first law questions with answer keys. To check calculations where forces do not balance, use the force calculator, and for related equations see the force formulas page.

Common Misconceptions

Myth: A moving object needs a constant force to keep moving.

Physics: With zero net force an object keeps moving at constant velocity. Everyday objects slow down only because friction and air resistance act on them.

Myth: An object at rest has no forces acting on it.

Physics: Resting objects usually feel several forces, such as weight and a support force. They stay at rest because those forces cancel.

Myth: When a car brakes, a force throws you forward.

Physics: No forward force acts on you. Your body continues at the old speed while the car slows, until the seat belt applies a backward force.

Myth: The first law is just a special case of the second law, so it adds nothing.

Physics: It also defines inertial frames, the viewpoints in which F = ma is valid, so physicists still treat it as a separate foundation.

Key Facts

  • Newton's first law states that an object keeps a constant velocity unless a net external force acts on it.
  • Being at rest is just the special case of a constant velocity equal to zero.
  • The law is also called the law of inertia, after the property of matter that resists changes in motion.
  • Forces are needed to change motion, not to maintain it.
  • Newton published the law in 1687, building on Galileo's ramp experiments and Descartes' ideas.
  • The first law holds in inertial reference frames, ones that are not themselves accelerating.
  • Seat belts, headrests and cargo nets are all designed around the first law.
Did you know? Probes launched in the 1970s are still heading out of the solar system today, coasting for decades with no engine pushing them, because the only notable force left on them, the Sun's fading gravity, changes their velocity very little.

Quick Quiz: How Well Do You Know Newton's First Law of Motion (Inertia)?

6 questions. Tap an answer to check it.

  1. According to Newton's first law, what happens to a moving object when the net force on it is zero?

  2. Newton's first law is also known as the law of:

  3. A car moves at a steady 25 m/s on a straight road. What is the net force on it?

  4. Why does a rolling ball on grass eventually stop?

  5. Which scientist's ramp experiments helped lead to the first law?

  6. In which situation does the first law hold without adding extra forces?

Frequently Asked Questions

What is Newton's first law in simple words?

Newton's first law says things keep doing what they are already doing unless a force makes them change. A ball sitting on the floor will not budge until something pushes it. A ball rolling on a perfectly smooth floor would keep rolling forever at the same speed. In real life, friction and air resistance are the forces that slowly stop moving objects.

Why is Newton's first law called the law of inertia?

It is called the law of inertia because it describes inertia, the natural tendency of every object to resist changes in its motion. The law tells you what happens when nothing overcomes that tendency: the velocity stays the same. Mass is the measure of how much inertia an object has.

What is an example of Newton's first law?

A common example is a passenger in a car that stops suddenly. The car slows down because the brakes act on it, but the passenger keeps moving forward at the earlier speed until the seat belt holds them back. Another is a hockey puck that slides a long way across ice, where little friction acts on it.

Who discovered Newton's first law?

Isaac Newton stated the law in his Principia in 1687, so it carries his name. The idea came earlier, though. Galileo Galilei argued in the early 1600s that a ball on a smooth level surface would roll forever, and René Descartes added that free motion follows a straight line. Newton combined these ideas into a single law.

What is the formula for Newton's first law?

The first law is written as a condition: if the vector sum of the forces, ΣF, is zero, then the velocity v stays constant. It matches Newton's second law, F_net = m a, with the net force set to zero, which forces the acceleration to be zero too. There is nothing to calculate except checking that the forces balance.

Does Newton's first law apply to objects at rest?

Yes. Rest is simply a velocity of zero, and the first law says that velocity will not change while the net force is zero. A parked car, a picture on a wall and a book on a desk all obey the first law, because the forces on each of them cancel out exactly.

How does Newton's first law apply in space?

Space shows the first law most clearly. Far from planets, there is almost no air or friction, so a spacecraft that turns off its engines keeps coasting at the same speed in the same direction. Mission planners rely on this to send probes across the solar system using short engine burns and long periods of coasting.

What is the difference between Newton's first and second laws?

The first law describes what happens when the net force is zero: velocity stays constant. The second law describes what happens when the net force is not zero: the object accelerates, and the acceleration equals the net force divided by the mass. Together they explain both steady motion and changing motion.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.