When changing magnetism makes electricity

Induced Electric Fields

An induced electric field is an electric field produced by a magnetic field that changes with time, rather than by electric charges. Its field lines close on themselves in loops around the region of changing flux. This looping field is what pushes charges around a coil in Faraday's law, and it exists even in empty space where no wire is present.

Two copper coils wound on one iron ring core, the setup in which a changing magnetic field induces an electric field
Two coils on one iron ring: changing flux in the core induces an electric field that drives current in the second coil.

At a Glance

An induced electric field is created whenever magnetic flux changes with time. Its circulation around any closed path equals the emf, given by Faraday's law: emf = -N ΔΦ_B/Δt. Unlike the field of a charge, it forms closed loops and is not conservative, so it can push charges around a full circuit.

Symbol
E (induced), emf ε around a loop
SI unit
volt per meter (V/m) = newton per coulomb (N/C)
Key law
Faraday's law: ε = -N ΔΦB/Δt
Scalar or vector
Vector field with closed loop lines
Source
A magnetic flux that changes with time
Conservative?
No: work around a closed path is not zero
On this page
  1. What Is an Induced Electric Field?
  2. Induced Electric Fields Explained Simply
  3. How Does Faraday's Law Describe the Induced Field?
  4. How Is an Induced Electric Field Different From an Electrostatic Field?
  5. How Do You Calculate the Induced Electric Field?
  6. Where Do Induced Electric Fields Show Up in Everyday Life?
  7. Can an Induced Electric Field Accelerate Particles?
  8. Who Discovered Induced Electric Fields?
  9. Practice Induced Field Problems
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Is an Induced Electric Field?

Most electric fields you meet in school come from charges. A charged balloon or the terminal of a battery sets up a field whose lines start on positive charge and end on negative charge. An induced electric field is different: it is created by a magnetic field that is changing with time, and it needs no charges at all.

The lines of an induced field do not start or end anywhere. They wrap around the region where the magnetic flux is changing, forming closed loops like the rings around a tree trunk. A charge placed anywhere on one of those loops feels a force along the loop.

This is the hidden machinery behind electromagnetic induction. When a magnet moves toward a coil, it is the induced electric field inside the copper that pushes the electrons along and makes the current flow.

Induced Electric Fields Explained Simply

Picture a round racetrack with a stream of water swirling around it. Anything floating on the track gets carried around and around. An induced electric field acts like that swirl, but for electric charges, and the thing that sets it swirling is a magnetic field getting stronger or weaker in the middle.

If the magnetic field holds steady, the swirl stops. If it grows, the swirl goes one way. If it shrinks, the swirl reverses. The faster the magnetic field changes, the stronger the swirl.

Lay a loop of wire along the track and the charges in the wire get pushed around it, so a current flows. Take the wire away and the swirl is still there in the empty space; you just have nothing to show it.

How Does Faraday's Law Describe the Induced Field?

Faraday's law says the emf around a loop equals minus the rate of change of magnetic flux through it. For a coil of N turns this reads ε=−NΔΦB/Δt. The emf is the work done per coulomb on a charge carried once around the loop, and the induced electric field is what does that work.

Written in terms of the field itself, the law becomes ∮E→⋅dl→=−dΦBdt. Add up the part of E that points along the path, all the way around, and you get the emf. This version holds for any imaginary loop in space, wire or no wire.

The minus sign carries Lenz's law. The induced field circulates in the direction that would drive a current whose own magnetic field fights the change in flux.

Faraday's law gives the emf, which is the work the induced field does per coulomb on a trip around a closed loop.

ε=−NΔΦBΔt
What each symbol means
SymbolQuantitySI unit
εinduced emfvolt (V)
Nnumber of turnsdimensionless (1)
ΔΦBchange in magnetic flux through one turnweber (Wb)
Δttime intervalsecond (s)

Rearranged to find another variable:

ΔΦB=−εΔtNN=−εΔtΔΦBΔt=−NΔΦBε

Valid for: minus sign expresses Lenz's law (induced emf opposes the change in flux); average emf over Δt.

Example 1 EMF in a pickup coil

A 200-turn pickup coil sits near an electromagnet. When the magnet switches on, the flux through each turn rises by 3.0 × 10⁻⁴ Wb in 0.050 s. What average emf does the induced electric field drive around the coil?

  1. Given:
    • number of turns: N=200
    • change in magnetic flux through one turn: ΔΦB=3×10−4 Wb
    • time interval: Δt=0.05 s
  2. Formula: ε=−NΔΦBΔt
  3. Substitute: N=200,ΔΦB=3×10−4 Wb,Δt=0.05 s
  4. Answer: ε=−1.2 V

The minus sign is Lenz's law: the induced field pushes current in the direction that opposes the rise in flux.

Graph of a triangle-shaped magnetic field and a square-wave induced electric field that flips sign at every peak of B
The induced field depends on how fast B changes, not on how big B is.

How Is an Induced Electric Field Different From an Electrostatic Field?

Both kinds of field push on a charge with a force F = qE, and both are measured in volts per meter. They differ in where they come from and in the shape of their lines. The table below lines up the main contrasts.

The biggest difference is that an induced field is not conservative. Carry a charge around a closed loop in an electrostatic field and the total work is zero, so you can define a voltage at every point. Carry it around a loop in an induced field and the work is not zero. That is why there is no single "voltage" at a point in a transformer core: the answer would depend on which path you took to get there.

In real devices the two often appear together. In a coil connected to a light bulb, the induced field drives the current through the copper, while charges that pile up on the wire surfaces create an ordinary electrostatic field that pushes the current through the bulb. Our electric field vs magnetic field page covers how the two families of field relate in general.

Electrostatic field vs induced electric field
PropertyElectrostatic fieldInduced electric field
SourceElectric chargesMagnetic flux changing with time
Shape of field linesStart on + charges, end on − chargesClosed loops with no start or end
Work around a closed pathZeroEqual to the emf, not zero
Can you define a voltage at each point?YesNo, not uniquely
Force on a chargeF = qEF = qE
UnitV/m (N/C)V/m (N/C)
Exists in empty space?Yes, near chargesYes, near changing flux
Everyday exampleA charged balloonThe core of a transformer
Source: Summary of Faraday's law and Coulomb's law; no measured values · Retrieved October 2026

How Do You Calculate the Induced Electric Field?

For a long solenoid with a uniform field B inside, symmetry makes the job easy. The induced field lines are circles centered on the axis, and E has the same size all the way around each circle. Inside the solenoid, at distance r from the axis, Faraday's law gives E=r2dBdt.

Outside the solenoid, the loop encloses all of the changing flux, so the emf around it stops growing with r. The field then falls off as E=R22rdBdt, where R is the solenoid's radius. The strongest induced field sits right at the edge of the winding.

The table shows the pattern for a 2 cm radius solenoid whose field rises at 3 T/s. Notice that the emf around a circle stays fixed once the circle is wider than the solenoid, even as E itself weakens.

Example 2 Induced field inside a solenoid

The magnetic field inside a long solenoid of radius 2.0 cm rises steadily by 0.60 T in 0.20 s. How strong is the induced electric field at 1.5 cm from the axis?

  1. Given:
    • distance from the solenoid axis: r=0.015 m
    • change in the field inside: ΔB=0.6 T
    • time interval: Δt=0.2 s
  2. Formula: E=r2ΔBΔt
  3. Substitute: r=0.015 m,ΔB=0.6 T,Δt=0.2 s
  4. Answer: E=0.0225 V/m

That is 22.5 millivolts per meter. It sounds tiny, but in a closed copper loop it drives a noticeable current because copper has so little resistance.

Example 3 Induced field outside the solenoid

Use the same solenoid (radius R = 0.020 m, field rising by 0.60 T in 0.20 s). How strong is the induced electric field at r = 0.050 m from the axis, where the magnetic field itself is almost zero?

  1. Given:
    • radius of the solenoid: R=0.02 m
    • distance from the axis: r=0.05 m
    • change in the field inside: ΔB=0.6 T
    • time interval: Δt=0.2 s
  2. Formula: E=R22rΔBΔt
  3. Substitute: R=0.02 m,r=0.05 m,ΔB=0.6 T,Δt=0.2 s
  4. Answer: E=0.012 V/m

The induced field exists outside the solenoid even though the magnetic field there is close to zero. What matters is the changing flux enclosed by the loop.

Induced electric field around a solenoid of radius 2 cm whose inside field rises at 3 T/s
Distance from axis (cm)WhereInduced field E (mV/m)EMF around that circle (mV)
0.5Inside7.500.236
1.0Inside15.000.942
1.5Inside22.502.121
2.0At the winding30.003.770
3.0Outside20.003.770
4.0Outside15.003.770
6.0Outside10.003.770
10.0Outside6.003.770
Source: Computed with E = (r/2)(dB/dt) inside and E = (R²/2r)(dB/dt) outside, emf = 2πrE · Retrieved October 2026

Where Do Induced Electric Fields Show Up in Everyday Life?

Every transformer on a power pole or inside a phone charger relies on them. Alternating current in the primary coil makes the flux in the iron core rise and fall many times a second, and the induced field around the core drives current in the secondary coil.

An induction cooktop uses a rapidly changing magnetic field under the glass. The induced electric field reaches into the metal base of the pan and drives swirling currents there, which heat the pan directly. Those swirls are eddy currents, the same effect that brakes trains and sorts aluminum cans at recycling plants.

Wireless chargers, metal detectors, guitar pickups and the coils in credit card readers all depend on a changing magnetic field making an electric field that moves charges somewhere else.

Steel pot heating on a black glass induction cooktop, warmed by currents driven by an induced electric field
An induction cooktop heats the pan through currents driven by an induced electric field in the metal.
Two 60 hertz sine waves showing the induced electric field a quarter cycle behind the magnetic flux in a transformer core
In a transformer the induced field is largest when the flux passes zero and is zero when the flux peaks.

Can an Induced Electric Field Accelerate Particles?

Yes. A betatron, developed in the 1940s, sends electrons around a circular vacuum tube placed in a magnetic field that grows with time. The growing flux through the ring creates an induced electric field along the tube, and that field speeds the electrons up on every lap. No electrodes are needed, because the loop-shaped field pushes the electrons the same way all the way around.

Induced fields also hold up light itself. In an electromagnetic wave, the changing magnetic field induces an electric field, and the changing electric field in turn creates a magnetic field through displacement current. Each keeps the other going as the wave travels at the speed of light.

Who Discovered Induced Electric Fields?

Michael Faraday found electromagnetic induction in 1831, describing it in terms of lines of force cutting through circuits. Decades later, James Clerk Maxwell recast the effect as a statement about fields: a changing magnetic field produces an electric field everywhere around it. That idea became one of Maxwell's equations.

The induced field also depends on who is watching. A rod sliding through a steady magnetic field has a motional emf, which a ground observer explains with the magnetic force on moving charges. An observer riding with the rod sees the charges at rest and must explain the same push with an electric field. That puzzle was one of the starting points for Einstein's special relativity in 1905.

Practice Induced Field Problems

To build skill, work through flux and emf questions first, then move on to field strength around solenoids. Our magnetism worksheets provide printable practice, and the magnetic field calculator finds the B values you need before you can work out how fast the flux changes. Then try the quiz below.

Common Misconceptions

Myth: A magnetic field pushes the charges directly when a magnet moves near a still coil.

Physics: Magnetic forces do no work on charges at rest. It is the induced electric field from the changing flux that pushes the electrons in a stationary coil.

Myth: Induced electric fields only exist inside wires.

Physics: The field exists in the space around the changing flux whether or not a conductor is there. A wire simply lets charges respond to it and form a current.

Myth: Every electric field can be described by a voltage at each point.

Physics: Only conservative fields can. An induced field does net work around a closed loop, so the potential at a point would depend on the path taken.

Myth: No magnetic field at a point means no induced electric field there.

Physics: Outside a long solenoid B is nearly zero, yet E is not, because the loop through that point still encloses changing flux.

Key Facts

  • An induced electric field is created by a magnetic field that changes with time, not by charges.
  • Its field lines form closed loops around the region where the magnetic flux is changing.
  • The emf around any closed path equals the work the induced field does per coulomb, given by Faraday's law.
  • An induced field is not conservative, so the work done around a closed loop is not zero.
  • Inside a long solenoid the induced field grows with distance from the axis; outside it falls off as 1/r.
  • Transformers, induction cooktops, wireless chargers and betatrons all depend on induced electric fields.
  • A changing magnetic field induces an electric field even in empty space, which is part of how light travels.
Did you know? The induced electric field around a solenoid reaches places where the magnetic field is essentially zero, which shows that it is the enclosed change in flux, not the local magnetic field, that sets the push on a charge.

Quick Quiz: How Well Do You Know Induced Electric Fields?

6 questions. Tap an answer to check it.

  1. What produces an induced electric field?

  2. What shape are the field lines of an induced electric field?

  3. The work done carrying a charge once around a loop in an induced field equals what?

  4. Inside a long solenoid, how does the induced field change as you move away from the axis?

  5. Which law sets the direction of an induced electric field?

  6. Which device does NOT rely mainly on an induced electric field?

Frequently Asked Questions

What is an induced electric field in simple words?

It is an electric field made by a changing magnetic field instead of by charges. When a magnet moves or a current in a coil rises or falls, the magnetic field in a region changes, and an electric field appears that loops around that region. Charges in any nearby wire get pushed around the loop, which is how induced currents flow.

What causes an induced electric field?

A magnetic flux that changes with time. The change can come from a magnet moving, a current switching on or off, an alternating current in a coil, or a loop changing shape in a field. The faster the flux changes, the stronger the induced field. A steady magnetic field, no matter how strong, produces no induced electric field.

Is an induced electric field conservative?

No. In a conservative field the work done carrying a charge around any closed path is zero. An induced field does net work around a loop that encloses changing flux, and that work per coulomb is the emf. Because of this, you cannot assign a single unique voltage to each point in an induced field.

What is the formula for induced electric field?

The general rule is that the circulation of E around a closed path equals minus the rate of change of magnetic flux through it. For a long solenoid of radius R, this gives E = (r/2)(dB/dt) inside at distance r from the axis, and E = (R²/2r)(dB/dt) outside. For a coil, the total emf is ε = -N ΔΦ_B/Δt.

What is the difference between induced emf and induced electric field?

The induced electric field is the force per unit charge at each point, measured in volts per meter. The induced emf is the total push around a whole loop, measured in volts. You get the emf by adding up the part of the field that points along the path all the way around. A bigger loop can have a larger emf even where the field is weaker.

What direction does the induced electric field point?

It circulates around the changing flux in the direction set by Lenz's law. Imagine a loop of wire along the field line: the induced field points the way that would drive a current whose magnetic field opposes the change. If the flux through the loop is growing, the induced current would create flux in the opposite direction.

Can an induced electric field exist without a wire?

Yes. The field is a property of space around changing magnetic flux. A wire only gives charges a path to move along so that a current can be detected. In empty space the field still exists, and in an electromagnetic wave it does real work as the light travels and carries energy.

How is an induced electric field used in transformers?

Alternating current in the primary coil makes the magnetic flux in the iron core rise and fall. That changing flux produces an induced electric field that loops around the core, through the turns of the secondary coil. The field pushes charges along the secondary windings and creates the output voltage, which depends on the number of turns.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.