Force per unit charge

Electric Field

An electric field is the region around an electric charge where another charge feels a force, and its strength at a point equals the force on a small positive test charge divided by that charge. It is a vector, measured in newtons per coulomb or, equivalently, volts per meter. Fields point away from positive charges and toward negative ones.

Charged balloon lifting small paper scraps off a table, showing the reach of an electric field without contact
A rubbed balloon pulls paper scraps toward it before touching them, a direct sign of its electric field.

At a Glance

The electric field at a point is the electric force per unit of positive charge placed there, E = F / q, measured in N/C (the same as V/m). Around a single point charge its strength is E = k|Q| / r^2, so it weakens with the square of distance, and between charged parallel plates it is uniform, E = V / d.

Symbol
E (bold or with an arrow, since it is a vector)
SI unit
newton per coulomb (N/C), equal to volt per meter (V/m)
Formula
E = F / q
Scalar or vector
Vector: it has size and direction
Point charge
E = k|Q| / r²
Direction
Away from + charges, toward − charges
On this page
  1. What Is an Electric Field?
  2. Electric Field Explained Simply
  3. What Is the Formula for Electric Field?
  4. What Is the Electric Field of a Point Charge?
  5. What Do Electric Field Lines Show?
  6. What Is a Uniform Electric Field?
  7. How Is Electric Field Related to Voltage?
  8. How Do Electric Fields from Several Charges Add?
  9. Where Do You Find Electric Fields in Everyday Life?
  10. Who Came Up With the Idea of an Electric Field?
  11. Practice Electric Field Problems
  12. Common Misconceptions
  13. Key Facts
  14. Quiz
  15. FAQ

What Is an Electric Field?

Every electric charge changes the space around it. Bring a second charge into that space and it is pushed or pulled, even though nothing touches it. The electric field is the name for this influence: at each point in space it tells you how strong the push would be, and in which direction, for every coulomb of charge you placed there.

The field idea solves a puzzle about action at a distance. Instead of saying that one charge somehow reaches across empty space to tug another, we say the first charge creates a field, and the second charge responds to the field right where it sits. This view turned out to be more than bookkeeping, because changing fields carry energy and travel outward as light.

Electric fields are vectors. At any point the field has a size, called the field strength, and a direction. By convention the direction is the way a positive test charge would be pushed: straight away from a positive charge and straight toward a negative one.

Electric Field Explained Simply

Picture a charged balloon after you rub it on your hair. Hold it near tiny bits of paper and they jump up to meet it before the balloon touches them. The balloon is surrounded by an invisible zone of influence, and the paper responds as soon as it enters that zone. That zone is the electric field.

The field is strongest close to the balloon and fades quickly as you move away. Move twice as far and the pull drops to roughly a quarter. If you could carry a tiny charged speck around the balloon and feel the push at every spot, you would be mapping its field.

What Is the Formula for Electric Field?

The electric field is defined as force per unit charge: E=Fq. Here F is the electric force in newtons on a small positive test charge q in coulombs, and E comes out in newtons per coulomb. The test charge must be small so that it does not disturb the charges that create the field.

Rearranged, the same formula gives the force on any charge sitting in a known field: F=qE. A positive charge is pushed along the field direction, and a negative charge is pushed the opposite way with the same size of force. This is the form engineers use to steer electrons in old television tubes and ions in mass spectrometers.

The unit N/C is exactly equal to V/m, volts per meter. Both appear in textbooks and data sheets, and you can switch between them freely.

Here is the defining formula with each symbol and its SI unit, plus the rearranged forms for finding force or charge.

E=Fq
What each symbol means
SymbolQuantitySI unit
Eelectric field strengthnewton per coulomb (N/C)
Felectric force on the test chargenewton (N)
qtest chargecoulomb (C)

Rearranged to find another variable:

F=qEq=FE

Valid for: positive test charge; vector field (force on a negative charge is opposite to E).

Example 1 Measuring a field with a test charge

A tiny bead carrying +2.0 µC is held at one spot near a charged plastic rod, and a sensor shows an electric force of 0.006 N on it. What is the electric field strength at that spot?

  1. Given:
    • electric force on the test charge: F=0.006 N
    • test charge: q=2×10−6 C
  2. Formula: E=Fq
  3. Substitute: F=0.006 N,q=2×10−6 C
  4. Answer: E=3,000 N/C

The field belongs to the rod, not the bead; a bead with twice the charge would feel twice the force but report the same field.

What Is the Electric Field of a Point Charge?

Combining the definition with Coulomb's law gives the field of a single point charge Q: E=k|Q|r2, where r is the distance from the charge and k is Coulomb's constant, about 8.99 × 10⁹ N·m²/C². The field spreads out evenly in all directions, like light from a bare bulb.

The square in the denominator is the key feature. Double the distance and the field drops to one quarter; ten times farther and it drops to one hundredth. The table below shows this fall-off for a charge of one nanocoulomb, about what a rubbed balloon might hold on a small patch.

To find the force between two specific charges rather than the field of one, use our Coulomb's law calculator.

Example 2 Field near a small charged sphere

A small metal sphere holds a charge of +5.0 nC. Using k = 8.988 × 10⁹ N·m²/C², what is the electric field strength 3.0 cm from its center?

  1. Given:
    • Coulomb constant: k=8.988×109 N·m2/C2
    • source charge: Q=5×10−9 C
    • distance from the charge: r=0.03 m
  2. Formula: E=k|Q|r2
  3. Substitute: k=8.988×109 N·m2/C2,Q=5×10−9 C,r=0.03 m
  4. Answer: E=49,930 N/C

Even a few nanocoulombs make a strong field close up, because the distance in the denominator is squared.

Electric field strength around a +1 nC point charge at different distances
Distance from chargeField strength (N/C)Compared with 1 cm
1 cm89,8761
2 cm22,4691/4
5 cm3,5951/25
10 cm898.81/100
50 cm35.951/2,500
1 m8.9881/10,000
Source: Computed with E = kQ/r², k = 1/(4πε₀) from the vacuum electric permittivity ε₀ = 8.8541878188 × 10⁻¹² F/m (NIST CODATA 2022) · Retrieved October 2026

What Do Electric Field Lines Show?

Field lines are a way to draw an invisible vector field on paper. Each line follows the direction a positive test charge would be pushed, and an arrow shows that direction. Where lines crowd together the field is strong; where they spread apart it is weak.

A few rules always hold. Lines start on positive charges and end on negative charges, or run off toward infinity. They never cross, because the field can only point one way at any spot. The number of lines leaving a charge is drawn in proportion to the size of the charge.

The first diagram shows the straight, outward lines of a lone positive charge. The second shows an electric dipole, a positive and negative pair, where lines curve from one charge to the other. Our page on electric field lines covers more patterns and how to sketch them.

Electric field lines of a single positive point charge, straight lines pointing radially outward in every direction
Around a lone positive charge the field lines point straight outward and spread apart as the field weakens.

What Is a Uniform Electric Field?

Between two large, flat, parallel plates with opposite charges, the field is the same size and direction everywhere except near the edges. This is called a uniform field, and it is drawn as evenly spaced parallel lines running from the positive plate to the negative plate.

For a uniform field there is a simple link to voltage: E=V/d, where V is the potential difference between the plates and d is their separation. That is why V/m is such a natural unit. Uniform fields are at the heart of parallel-plate capacitors, inkjet printers and particle accelerators.

A charge released in a uniform field feels a constant force and so accelerates steadily, just as a dropped ball does in Earth's nearly uniform gravitational field.

Example 3 Field between two charged plates

Two large flat metal plates are 6.0 mm apart and connected to a 1,500 V supply. What is the strength of the uniform electric field between them?

  1. Given:
    • potential difference: V=1,500 V
    • distance along the field direction: d=0.006 m
  2. Formula: E=Vd
  3. Substitute: V=1,500 V,d=0.006 m
  4. Answer: E=250,000 V/m

That is still below the roughly three million volts per meter at which dry air typically breaks down and sparks.

Uniform electric field between two parallel plates 6 mm apart at 1,500 V, drawn as evenly spaced parallel lines
Between large parallel plates the field lines are straight, parallel and evenly spaced.

How Is Electric Field Related to Voltage?

Electric field and electric potential describe the same situation in two ways. Potential, measured in volts, is energy per unit charge at each point. The field points in the direction in which potential falls fastest, and its strength equals how quickly the potential changes with distance.

A helpful image is a hillside. Potential is the height of the ground, and the field is the steepness and downhill direction of the slope. Lines of equal potential, called equipotentials, are like contour lines on a map, and they always cross the field lines at right angles. The dashed curves around the dipole diagram are equipotentials. See potential difference for the voltage side of the story.

Electric field lines of a dipole curving from the positive to the negative charge, with dashed equipotential curves crossing them
In a dipole the lines curve from the positive charge to the negative one, crossing equipotentials at right angles.

How Do Electric Fields from Several Charges Add?

When more than one charge is present, the total field at a point is the vector sum of the fields from each charge. This is called the principle of superposition. Each charge contributes as if the others were not there, and then the arrows are added head to tail.

Superposition explains why the field midway between two equal positive charges is zero: the two contributions are equal in size and point in opposite directions. It also explains why the field near a dipole is strongest in the gap between the charges, where both contributions point the same way. For smooth spreads of charge, such as a charged rod or sphere, the sum becomes an integral, which Gauss's law can often shortcut.

Where Do You Find Electric Fields in Everyday Life?

Electric fields are at work all around you. A thunderstorm builds a strong field between cloud and ground until the air breaks down into a lightning stroke. The touchscreen on a phone senses the small change in field caused by your fingertip. Photocopiers and laser printers use fields to place toner powder exactly where the image should be.

Inside every wire that carries current, a modest field pushes the free electrons along. Sharks and rays have sensory organs that detect the faint fields made by the muscles of hidden prey. A closed metal box, called a Faraday cage, blocks outside fields, which is why phone signals often fade inside elevators.

Typical electric field strengths in nature and technology
SituationTypical field strength (V/m)
Inside a household copper wire carrying currentwell under 1
Fair-weather air near the groundabout 100 to 150
Beneath a thundercloudabout 10,000 or more
Plates 6.0 mm apart at 1,500 V250,000 (computed)
Breakdown of dry air (sparks form)about 3,000,000
Across a cell membraneabout 10,000,000
Source: Typical order-of-magnitude values; the plate value is computed with E = V/d for 1,500 V across 6.0 mm · Retrieved October 2026
Thunderstorm cloud building over farmland at dusk, where a strong electric field forms between cloud and ground
A storm cloud builds a powerful electric field above the ground until the air breaks down into lightning.

Who Came Up With the Idea of an Electric Field?

The field concept grew from the work of Michael Faraday in the nineteenth century. Faraday pictured lines of force filling the space around charges and magnets and treated them as physically real, not just a drawing aid. Later, James Clerk Maxwell turned those pictures into equations and showed that changing electric and magnetic fields travel together as electromagnetic waves.

Electric fields have a close partner in the magnetic field produced by moving charges. Our comparison of electric field vs magnetic field sets out how they differ and how they combine.

Practice Electric Field Problems

To build confidence, work through a set of field and force problems on paper. Our Coulomb's law worksheets include printable electric force and field questions with answer keys, and the static electricity worksheets cover charging and field-line sketches. Then try the quiz below.

Common Misconceptions

Myth: The electric field depends on the test charge you use to measure it.

Physics: The field is set by the source charges. A bigger test charge feels a bigger force, but the force divided by the charge, which is the field, stays the same.

Myth: Field lines are the paths that charges always follow.

Physics: A field line shows the direction of the force at each point. A moving charge has inertia, so it can drift off a curved field line.

Myth: There is no electric field where no field line is drawn.

Physics: Field lines are just a sample. The field exists at every point in the region, including the gaps between the lines on a diagram.

Myth: A negative charge is pushed along the field direction.

Physics: Field direction is defined by a positive charge. A negative charge feels a force of the same size in the opposite direction.

Key Facts

  • An electric field is the force per unit positive charge at a point, found with E = F / q.
  • Field strength is measured in newtons per coulomb, which is the same as volts per meter.
  • The electric field is a vector that points away from positive charges and toward negative charges.
  • The field of a point charge falls off with the square of distance, E = k|Q| / r².
  • Between large charged parallel plates the field is uniform and equals the voltage divided by the plate gap.
  • Field lines never cross, and they are closest together where the field is strongest.
  • Fields from several charges add as vectors, a rule called superposition.
Did you know? Light itself is a traveling electric field locked together with a magnetic field. The electric field in bright midday sunlight swings back and forth hundreds of trillions of times per second.

Quick Quiz: How Well Do You Know Electric Field?

6 questions. Tap an answer to check it.

  1. Which formula defines electric field strength?

  2. Which unit is equivalent to newtons per coulomb?

  3. You move twice as far from a point charge. What happens to the field strength?

  4. In which direction does the field point near a negative charge?

  5. What is true about electric field lines?

  6. Two parallel plates 0.01 m apart have 200 V across them. What is the field between them?

Frequently Asked Questions

What is an electric field in simple terms?

An electric field is the invisible zone of influence around a charged object. Any other charge that enters this zone is pushed or pulled without being touched. The field is strongest near the charge and weakens with distance. We describe it at each point by the force it would exert on one coulomb of positive charge placed there, together with the direction of that force.

What is the SI unit of electric field?

The SI unit is the newton per coulomb, written N/C. It is exactly equal to the volt per meter, V/m, so either can be used. N/C fits the force-per-charge definition, while V/m fits the link between field and voltage across a gap. For example, a field of 500 N/C is the same as 500 V/m.

Is electric field a vector or a scalar quantity?

Electric field is a vector. At every point it has a strength and a direction, defined as the direction of the force on a positive test charge. Because it is a vector, fields from several charges must be added by taking direction into account. Electric potential, by contrast, is a scalar and can be added as plain numbers.

What is the formula for the electric field of a point charge?

The field of a point charge is E = k|Q| / r², where Q is the charge in coulombs, r is the distance in meters and k is Coulomb's constant, about 8.99 × 10⁹ N·m²/C². The field points away from a positive charge and toward a negative one. Doubling the distance cuts the field strength to a quarter of its value.

Which direction does an electric field point?

An electric field points in the direction a positive charge would be pushed. Around a positive charge it points straight outward, and around a negative charge it points straight inward. Between oppositely charged plates it runs from the positive plate to the negative one. Negative charges always feel a force opposite to the field direction.

How do you calculate electric field strength?

If you know the force on a small test charge, divide the force by the charge: E = F / q. If you know the source is a point charge, use E = k|Q| / r². If the field is between parallel plates, divide the voltage across them by their separation: E = V / d. In every case use SI units so the answer comes out in N/C or V/m.

What is the difference between electric field and electric force?

Electric force is the push or pull on one particular charge, measured in newtons, and it depends on how big that charge is. The electric field is the force per unit charge at a location, measured in N/C, and it belongs to the space around the source charges. Multiply the field by any charge placed there and you get the force on that charge.

Can an electric field be zero?

Yes. Far from all charges the field becomes negligible, and at some points the contributions from different charges cancel exactly, such as the midpoint between two equal like charges. Inside a solid conductor in electrostatic equilibrium the field is also zero, because free charges rearrange themselves until they feel no net force. A closed metal shell shields its interior in the same way.

What creates an electric field?

Electric charges create electric fields, whether the charges are at rest or moving. A changing magnetic field also creates an electric field, which is the basis of electric generators and transformers. In light and radio waves, changing electric and magnetic fields create each other and travel through space together without needing any charges nearby.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.