Energy per unit charge

Electric Potential and Potential Difference

Potential difference is the change in electric potential energy per unit of charge when a charge moves between two points, ΔV = ΔU/q. It is measured in volts, where one volt equals one joule per coulomb. A potential difference across a component is what pushes charge through it, and it is the quantity a voltmeter reads.

Transmission towers carrying high-voltage cables across fields, with birds perched safely on a single cable
Power lines run at a high potential difference to ground, yet a bird on one cable feels almost none across its body.

At a Glance

Potential difference is the energy transferred per coulomb of charge moving between two points, found with ΔV = ΔU / q. Its SI unit is the volt (V), equal to one joule per coulomb, so a 9 V battery gives each coulomb that passes through it 9 J of energy.

Symbol
ΔV (often written V)
SI unit
volt (V), equal to 1 J/C
Formula
ΔV = ΔU / q
Scalar or vector
Scalar, can be positive or negative
Measured with
A voltmeter connected across two points
Also called
Voltage, p.d.
On this page
  1. What Is Potential Difference?
  2. Potential Difference Explained Simply
  3. What Is the Formula for Potential Difference?
  4. What Is the Difference Between Electric Potential and Potential Difference?
  5. How Is Potential Difference Related to Work and Energy?
  6. How Does the Electric Field Create a Potential Difference?
  7. How Does Potential Difference Work in a Circuit?
  8. What Are Some Typical Potential Differences?
  9. Common Misconceptions
  10. Key Facts
  11. Quiz
  12. FAQ

What Is Potential Difference?

Potential difference compares two points in an electric field or a circuit. It tells you how much electric potential energy one coulomb of charge gains or loses when it moves from the first point to the second. If moving 1 C between two points transfers 1 J, the potential difference between them is 1 V.

The word "difference" matters. A single point does not have a potential difference; only a pair of points does. That is why a voltmeter always has two leads and is connected across a component, one lead on each side.

In everyday language people say voltage, and in circuit problems the two words mean the same thing. Physicists keep the longer name when they want to stress that it is a change between two locations, built on the idea of electric potential at each point.

Potential Difference Explained Simply

Think of water stored in a tank on a hill. The higher the tank, the more energy each liter of water gives up as it flows down through a pipe and turns a wheel. Height difference for water plays the role that potential difference plays for electric charge.

A battery is like a pump that lifts charge to the top of the hill. The charge then flows "downhill" through a lamp or a heater, giving up energy along the way. A bigger potential difference means each bit of charge carries more energy to hand over.

The analogy also explains why potential difference alone does not tell you how much energy is used. A tall hill with a thin trickle of water does less work per second than a lower hill with a river. In circuits, the trickle or river is the current.

Water tower on a hill feeding a stream that turns a waterwheel, an analogy for potential difference driving charge
Water stored high up gives energy to a wheel as it flows down, much as charge gives energy to a lamp as it falls through a potential difference.

What Is the Formula for Potential Difference?

The defining formula is ΔV=ΔU/q. Here ΔU is the change in electric potential energy in joules and q is the charge in coulombs that moved, so the result is in volts. Rearranged, ΔU=qΔV gives the energy transferred for a known voltage.

In circuits it is often easier to find potential difference from current and resistance. For a resistor, Ohm's law gives V=IR, and our Ohm's law calculator solves for any of the three. Both routes give the same volts, because Ohm's law is just a convenient way to find the energy per coulomb in a resistor.

All the main electricity equations, including this one, are collected on our electricity formula sheet.

Here is the defining formula with each symbol and its SI unit, plus the rearranged forms for energy and charge.

ΔV=ΔUq
What each symbol means
SymbolQuantitySI unit
ΔVpotential differencevolt (V)
ΔUchange in electric potential energyjoule (J)
qcharge movedcoulomb (C)

Rearranged to find another variable:

ΔU=qΔVq=ΔUΔV

Example 1 Finding the voltage from energy and charge

When 0.05 C of charge moves through a small motor, the electrical energy it transfers to the motor is 0.6 J. What is the potential difference across the motor?

  1. Given:
    • change in electric potential energy: ΔU=0.6 J
    • charge moved: q=0.05 C
  2. Formula: ΔV=ΔUq
  3. Substitute: ΔU=0.6 J,q=0.05 C
  4. Answer: ΔV=12 V

Dividing joules by coulombs gives volts directly, so no unit conversion is needed when both values are in SI units.

What Is the Difference Between Electric Potential and Potential Difference?

Electric potential is a value assigned to one point: the potential energy a coulomb of charge would have if it were placed there, measured from some chosen zero. Potential difference is what you get when you subtract the potentials of two points, ΔV=VB−VA.

The choice of zero is free. In circuits the negative terminal or a wire connected to ground is usually called 0 V. For an isolated charge, physicists usually put zero infinitely far away. Moving the zero shifts every potential by the same amount, so every potential difference stays exactly the same.

This is why only potential differences have a direct physical effect. A bird can sit on a high-voltage line safely because both of its feet are at nearly the same potential; there is almost no difference across its body to drive a current.

How Is Potential Difference Related to Work and Energy?

Potential difference is work per unit charge. To move a positive charge from a low-potential point to a high-potential point, something must do work on it, and that work is stored as electric potential energy. Let the charge go and the field does the work instead, turning the stored energy into motion, heat or light.

The sign depends on the charge. A positive charge loses potential energy as it moves toward lower potential, while a negative charge such as an electron loses potential energy as it moves toward higher potential. That is why electrons in a wire drift from the negative terminal toward the positive one.

At the scale of single particles, physicists use the electronvolt. An electron crossing a potential difference of 1 V gains exactly 1.602176634 × 10⁻¹⁹ J, the size of the elementary charge times one volt.

Example 2 Energy delivered by a battery

A 9 V battery drives 2 C of charge around a circuit. How much energy does the battery transfer to that charge?

  1. Given:
    • charge moved: q=2 C
    • potential difference: ΔV=9 V
  2. Formula: ΔU=qΔV
  3. Substitute: q=2 C,ΔV=9 V
  4. Answer: ΔU=18 J

Every coulomb picks up 9 J, which is exactly what the 9 V rating means.

How Does the Electric Field Create a Potential Difference?

A potential difference exists wherever there is an electric field, because the field pushes on charges and so does work on them as they move. Potential always decreases in the direction the field points. The field lines run from high potential toward low potential.

Between two large parallel plates the field is uniform, and the relationship is simple: V=Ed, where E is the field strength in volts per meter and d is the plate separation in meters. Double the gap at the same field and the potential difference doubles.

Surfaces where every point has the same potential are called equipotentials. Moving a charge along one takes no work, and these surfaces always cross field lines at right angles.

Example 3 Voltage between two charged plates

Two large parallel metal plates are 0.004 m apart, and the uniform electric field between them has a strength of 2,500 V/m. What is the potential difference between the plates?

  1. Given:
    • uniform electric field strength: E=2,500 V/m
    • distance along the field direction: d=0.004 m
  2. Formula: V=Ed
  3. Substitute: E=2,500 V/m,d=0.004 m
  4. Answer: V=10 V

A strong field across a tiny gap gives a modest voltage, which is why touch screens and capacitors can use low voltages with thin layers.

Uniform electric field between a positive and a negative plate 4 mm apart with a 10 V potential difference
Between parallel plates the field is uniform, and the potential difference equals the field strength times the gap.

How Does Potential Difference Work in a Circuit?

In a circuit, a battery or power supply sets up a potential difference between its terminals. Charge leaves the high-potential terminal, gives up energy in each component and arrives back at the low-potential terminal. Around a complete loop, the drops across the components add up to the rise provided by the source.

In the series loop below, a 9 V battery feeds a 100 Ω and a 200 Ω resistor. The larger resistor takes the larger share of the 9 V, and the two shares add back to the battery's voltage. Connected in parallel instead, each resistor would get the full 9 V.

To measure potential difference, connect a voltmeter across the part, never in line with it. A good voltmeter has a very high resistance so that it draws almost no current. See ammeters and voltmeters for how each meter is placed, and current vs voltage for how the two quantities differ.

Series circuit with a 9 V battery, 100 and 200 ohm resistors and a voltmeter connected across one resistor
A voltmeter connected across a resistor reads the potential difference between its two ends.

What Are Some Typical Potential Differences?

Potential differences in daily life span a huge range. The membrane of a resting nerve cell holds roughly a tenth of a volt, while a lightning stroke can involve hundreds of millions of volts between cloud and ground. The table lists common values and the energy each one gives to a single electron.

The energy per electron is tiny even for mains voltage, but a working circuit moves enormous numbers of electrons every second. One coulomb is about six billion billion electrons, and a 1 A current carries that much charge past any point each second.

For the history of the unit, see Alessandro Volta, whose stacked metal-disk pile gave the first steady potential difference, and our page on the volt.

Typical potential differences and the energy given to one electron
SourceTypical potential differenceEnergy per coulomb (J)Energy per electron (J)
Resting nerve cell membraneabout 0.07 V0.071.12 × 10⁻²⁰
AA alkaline cell1.5 V1.52.40 × 10⁻¹⁹
USB port5 V58.01 × 10⁻¹⁹
Rectangular battery9 V91.44 × 10⁻¹⁸
Car battery12 V121.92 × 10⁻¹⁸
US household outletabout 120 V1201.92 × 10⁻¹⁷
European household outletabout 230 V2303.68 × 10⁻¹⁷
Source: Nominal and typical values · energy per electron computed as ΔV × e with e = 1.602176634 × 10⁻¹⁹ C (NIST CODATA 2022, exact) · Retrieved October 2026

Common Misconceptions

Myth: Potential difference flows through a circuit like current does.

Physics: Potential difference exists between two points and does not flow. It is the push that makes charge flow, and current is the flow itself.

Myth: A high voltage by itself is always dangerous.

Physics: Danger depends on the current a source can drive through the body. A static shock can exceed thousands of volts but delivers very little energy.

Myth: Potential and potential difference are the same quantity.

Physics: Potential belongs to one point and depends on the chosen zero. Potential difference compares two points and does not depend on where zero is set.

Myth: Charge is used up as it passes through a lamp.

Physics: Charge is conserved and returns to the source. What the lamp uses is energy, which the charge loses as it moves to lower potential.

Key Facts

  • Potential difference is the energy change per coulomb of charge moving between two points, ΔV = ΔU/q.
  • The SI unit is the volt, and one volt equals one joule per coulomb.
  • Potential difference is a scalar and only has meaning between two points, never at one point alone.
  • In everyday circuit work, potential difference and voltage mean the same thing.
  • In a uniform field between parallel plates, the potential difference is V = Ed.
  • A voltmeter measures potential difference and is always connected across a component.
  • An electron crossing 1 V gains 1.602176634 × 10⁻¹⁹ J, which defines one electronvolt.
Did you know? An electric eel can produce a potential difference of several hundred volts by stacking thousands of special cells in series, each one adding only a small fraction of a volt.

Quick Quiz: How Well Do You Know Electric Potential and Potential Difference?

6 questions. Tap an answer to check it.

  1. What does a potential difference of 1 V mean?

  2. A 6 V battery moves 3 C of charge around a circuit. How much energy does it transfer?

  3. How should a voltmeter be connected to measure the voltage across a lamp?

  4. Changing the zero point of electric potential affects which quantity?

  5. Two parallel plates are 0.01 m apart with a uniform field of 500 V/m. What is the potential difference?

  6. Why can a bird sit safely on a single power line?

Frequently Asked Questions

What is potential difference in simple words?

Potential difference is how much energy each coulomb of charge gains or loses when it moves from one point to another. A 1.5 V cell gives each coulomb 1.5 J of energy, which the charge then hands over to a bulb or motor. It is the electrical push that drives current through a circuit.

Is potential difference the same as voltage?

In circuit work, yes. Voltage is the everyday name for the potential difference between two points, and both are measured in volts. Physicists sometimes prefer potential difference because it reminds you that the value always compares two points. Electromotive force is a related but different idea that describes the energy a source supplies.

What is the unit of potential difference?

The SI unit is the volt, symbol V. One volt equals one joule of energy per coulomb of charge, and in base units it is kg·m²/(s³·A). Small values are given in millivolts and microvolts, while power lines and lightning are described in kilovolts and megavolts.

How do you calculate potential difference?

Divide the energy transferred by the charge that moved: ΔV = ΔU/q. If 30 J of energy is transferred by 5 C of charge, the potential difference is 6 V. For a resistor you can also use Ohm's law, V = IR, and between parallel plates you can use V = Ed.

Can potential difference be negative?

Yes. The sign shows the direction you move. Going from a high-potential point to a low-potential point gives a negative change, and going the other way gives a positive change. In circuit problems people usually quote the size of the voltage and state which side is higher, so the sign is often left out.

What instrument measures potential difference?

A voltmeter, or a multimeter set to its voltage range. It is connected in parallel with the component, with one lead on each side. A good voltmeter has a very high resistance so it draws almost no current and does not change the circuit it is measuring.

Why is potential difference needed for current to flow?

Charges in a conductor drift steadily only when something pushes them, and that push comes from an electric field along the wire. A field along the wire always means the two ends sit at different potentials. With no potential difference, the charges just move randomly and there is no overall current.

What is the potential difference across a wire?

For a short connecting wire it is very small, often a few thousandths of a volt, because the wire's resistance is tiny. Circuit diagrams treat it as zero. In long cables carrying large currents the drop becomes noticeable, which is one reason power companies send electricity at high voltage and low current.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.