The law of entropy

Second Law of Thermodynamics

The second law of thermodynamics states that heat flows spontaneously only from a hotter object to a colder one, and that the total entropy of an isolated system never decreases. One consequence is that no engine can turn heat completely into work. The law explains why ice melts in a warm room, why coffee cools and why time seems to run in one direction.

An ice cube melting on a slate plate beside a steaming mug, showing heat flowing from warm to cold as the second law requires
Heat flows from the warm room and tea into the ice, never the other way, which is the second law in action.

At a Glance

The second law of thermodynamics says the total entropy of an isolated system never decreases, written ΔS ≥ 0, so heat moves on its own only from hot to cold. It also caps the efficiency of any heat engine at the Carnot limit, e = 1 − Tc / Th, with both temperatures in kelvin.

Stated by
Rudolf Clausius and William Thomson (Lord Kelvin), building on Sadi Carnot
Year
Carnot 1824; Clausius 1850 (statement published 1854); Kelvin 1851
Formula
ΔSisolated ≥ 0; engine limit eC = 1 − Tc/Th
Key quantity
Entropy S, in joules per kelvin (J/K)
Also called
The law of entropy
Applies to
Every macroscopic process: engines, refrigerators, chemical reactions, living things, stars
On this page
  1. What Does the Second Law of Thermodynamics Say?
  2. The Second Law Explained Simply
  3. What Is the Clausius Statement of the Second Law?
  4. What Is the Kelvin-Planck Statement?
  5. What Is the Maximum Efficiency of a Heat Engine?
  6. How Is the Second Law Written With Entropy?
  7. What Are Examples of the Second Law in Everyday Life?
  8. Who Discovered the Second Law of Thermodynamics?
  9. Going Deeper: Does the Second Law Ever Fail?
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Does the Second Law of Thermodynamics Say?

The second law tells you which way energy changes can happen on their own. The first law only says energy is conserved, so it would allow a cold drink to grow colder while the warm air around it heats up, as long as the totals balance. Nobody has ever seen that happen. The second law is the rule that forbids it.

There are several equivalent ways to state the law. The simplest says heat flows by itself from hot to cold, never the reverse. The engine version says no device working in a cycle can take heat from one source and convert all of it into work. The modern version says the total entropy of an isolated system can stay the same or rise, but never fall.

These statements sound different, yet each one can be proved from any of the others. If you could build a machine that broke one of them, you could combine it with an ordinary engine or fridge to break all of them. That is why physicists treat them as one law with three faces.

The Second Law Explained Simply

Picture a hot bowl of soup on a kitchen table. Left alone, it cools until it matches the room. You never see a lukewarm bowl suddenly start steaming again by pulling heat out of the cooler air. Energy spreads out from where it is concentrated to where it is thin, and it does not gather back up without help.

Entropy is a way of measuring how spread out energy is. When heat leaves the soup and warms millions of air molecules a tiny bit, the energy is shared among far more particles than before. There are vastly more ways to arrange energy that is spread out than energy that is bunched up, so the spread-out state is overwhelmingly likely.

You can push heat the other way, but it costs something. A refrigerator moves heat out of cold food into your warm kitchen, and it needs a steady supply of electrical work to do it. The total entropy of the fridge, the food and the kitchen still goes up.

What Is the Clausius Statement of the Second Law?

The Clausius statement says that heat cannot pass on its own from a colder body to a hotter body. The words "on its own" matter. A heat pump or an air conditioner does move heat from cold to hot, but only because an outside source supplies work.

In the diagram below, a hot block and a cold block are placed in contact inside an insulated box. The hot block cools and the cold block warms until both reach the same temperature, and then nothing more happens. That end point is called thermal equilibrium, and the second law guarantees the process will not run backward.

This statement is also why heat always leaks into a cold freezer and out of a warm house in winter. Insulation can slow the flow, but nothing passive can reverse it. To learn how the three paths of heat flow work, see our guide to heat transfer.

Graph of a hot block cooling from 80 °C and a cold block warming from 20 °C until both meet at 50 °C
The hot block cools and the cold block warms until they share one temperature; the reverse never happens on its own.

What Is the Kelvin-Planck Statement?

The Kelvin-Planck statement says no device running in a cycle can absorb heat from a single hot source and turn every joule of it into work. Some heat must always be dumped into a colder place. A car engine sends it out through the radiator and exhaust, and a power plant sends it into cooling towers or a river.

This is why every heat engine needs two temperatures, a hot reservoir and a cold one. The useful work equals the heat taken in minus the heat thrown away, W=Qh−Qc, and the thermal efficiency is e=W/Qh=1−Qc/Qh. Because Qc can never be zero, the efficiency is always below 1.

A machine that broke this rule would be a perpetual motion machine of the second kind. It would not create energy, but it could run a ship forever by cooling the ocean slightly. Patent offices still receive designs like this, and every one of them fails.

Example 2 How efficient is a test engine?

In each cycle, a small test engine takes in 2,400 J of heat from its hot side and releases 1,560 J of heat to the surrounding air. What is its thermal efficiency as a fraction?

  1. Given:
    • heat absorbed from the hot reservoir: Qh=2,400 J
    • heat rejected to the cold reservoir: Qc=1,560 J
  2. Formula: e=WQh=1−QcQh
  3. Substitute: Qh=2,400 J,Qc=1,560 J
  4. Answer: e=0.35

The released heat cannot be zero for any engine; that is the Kelvin-Planck statement of the second law in numbers.

Cooling towers releasing vapor beside a river, where a power plant dumps the waste heat the second law requires
Cooling towers carry away the heat every power plant must reject to its cold reservoir.

What Is the Maximum Efficiency of a Heat Engine?

The second law sets a hard ceiling on engine efficiency that depends only on the two reservoir temperatures. Sadi Carnot found this limit by imagining a perfect, frictionless engine that runs so slowly every step can be reversed. The ceiling is eC=1−Tc/Th, where both temperatures must be in kelvin.

The formula shows two ways to build a better engine: run the hot side hotter or the cold side colder. The table below keeps the cold side at 300 K, about room temperature, and raises the hot side. Even at 1,500 K the best possible engine still wastes a fifth of its heat.

No real engine reaches the Carnot value, because real engines have friction, run fast and lose heat through their walls. To see the ideal cycle step by step, read about the Carnot cycle.

The most practical form of the second law is the Carnot limit, the highest efficiency any engine could reach between two temperatures.

eC=1−TcTh
What each symbol means
SymbolQuantitySI unit
eCmaximum (Carnot) efficiencydimensionless (1)
Tcabsolute temperature of the cold reservoirkelvin (K)
Thabsolute temperature of the hot reservoirkelvin (K)

Rearranged to find another variable:

Tc=Th(1−eC)Th=Tc1−eC

Valid for: reversible engine; temperatures MUST be in kelvin; upper limit for any real engine.

Example 1 The ceiling for a steam power plant

A power plant boils water into steam at 820 K and dumps its waste heat into a river at 300 K. What is the highest possible efficiency of this plant, as a percentage?

  1. Given:
    • absolute temperature of the cold reservoir: Tc=300 K
    • absolute temperature of the hot reservoir: Th=820 K
  2. Formula: eC=1−TcTh
  3. Substitute: Tc=300 K,Th=820 K
  4. Answer: eC=63.41 %

Real steam plants reach well below this ceiling because of friction, heat leaks and turbulence, which all add entropy.

Maximum (Carnot) efficiency with the cold reservoir held at 300 K
Hot reservoir (K)Hot reservoir (°C, rounded)Carnot efficiencyHeat that must be rejected
40012725.0%75.0%
50022740.0%60.0%
60032750.0%50.0%
80052762.5%37.5%
1,00072770.0%30.0%
1,5001,22780.0%20.0%
Source: Computed with e = 1 − Tc/Th and T(°C) = T(K) − 273.15; ideal reversible engine · Retrieved October 2026

How Is the Second Law Written With Entropy?

In terms of entropy, the second law reads ΔSisolated≥0. An isolated system exchanges neither energy nor matter with anything outside it. Its entropy stays constant only for an ideal reversible process and rises for every real one.

For heat added slowly at a fixed temperature, the entropy change is ΔS=Q/T. That small formula explains the Clausius statement. When heat Q leaves a hot body at Th, its entropy falls by Q/Th; when the same heat enters a cold body at Tc, its entropy rises by Q/Tc. Because Tc is smaller, the gain beats the loss.

Entropy of one part of a system can go down, as long as something else gains more. Water freezing in a freezer loses entropy, but the heat pumped out into the kitchen raises the kitchen's entropy by a larger amount. Ludwig Boltzmann later linked entropy to the number of microscopic arrangements, S=kBln⁡W, which is why we describe it as a measure of spread.

Example 3 Entropy bookkeeping for heat leaking from hot to cold

1,000 J of heat leaks from a hot block at 400 K into a cool block at 300 K. Both blocks are large enough that their temperatures barely change. What is the total entropy change of the two blocks together?

  1. Given:
    • heat transferred reversibly (positive into the system): Q=1,000 J
    • T_h: Th=400 K
    • T_c: Tc=300 K
  2. Formula: ΔS=QT
  3. Substitute: Q=1,000 J,Th=400 K,Tc=300 K
  4. Answer: ΔS=0.8333 J/K

The cool block gains more entropy than the hot block loses, so the total goes up, exactly as the second law demands.

Copper bar between a hot end at 127 °C and a cold end at 27 °C with heat flowing steadily from the hot end to the cold end
Heat crosses the bar from the 400 K end to the 300 K end, and each joule that does so raises the total entropy.

What Are Examples of the Second Law in Everyday Life?

  • Melting ice in a drink. Heat flows from the warmer liquid into the ice until everything is the same temperature.
  • A cooling cup of tea. Heat leaves the tea and spreads through the room. It never flows back by itself.
  • Car engines. Most of the fuel's energy leaves as warm exhaust and radiator heat, as the Kelvin-Planck statement requires.
  • Refrigerators and heat pumps. They move heat uphill from cold to hot only while electrical work is supplied. See refrigerators and heat pumps.
  • Perfume in a room. The scent spreads through the air and never collects back into the bottle.
  • Rubbing your hands. Work turns into heat easily, but that warmth cannot be turned fully back into motion.

All of these are irreversible processes. Played backward on video, each one would look obviously wrong, and that one-way character is the second law at work.

Who Discovered the Second Law of Thermodynamics?

The roots go back to 1824, when the French engineer Sadi Carnot studied how much work a steam engine could possibly deliver. He showed that the answer depends on the temperature difference, not on the working substance. Carnot still believed heat was a fluid called caloric, so his reasoning needed later repair.

Rudolf Clausius laid the foundation of the law in 1850, and his heat-flow statement was published in 1854. William Thomson, later Lord Kelvin, gave his engine statement in 1851. In the following decade Clausius introduced the word entropy and stated the law in the form we use today.

Later in the century Ludwig Boltzmann explained entropy in terms of counting molecular arrangements. His work showed that the second law is a statistical law: entropy falling is not strictly impossible, just so unlikely for large systems that it never happens in practice. For the full story of the field, see who discovered thermodynamics.

Going Deeper: Does the Second Law Ever Fail?

For anything you can see or hold, the second law has never been observed to fail. For a handful of molecules, though, entropy can drop for a brief moment, because random motion sometimes bunches energy up. Experiments with tiny beads in water have measured these short-lived dips, and they match the statistical predictions.

Living things do not break the law either. A growing plant builds ordered sugar and wood, which lowers its own entropy, but it does this by absorbing sunlight and releasing heat and water vapor. The entropy of the plant plus its surroundings still goes up.

The law also connects to the third law, which deals with entropy near absolute zero. For the whole set of four laws side by side, see our overview of the laws of thermodynamics.

Common Misconceptions

Myth: The second law means entropy can never decrease anywhere.

Physics: Entropy can fall in one part of a system, such as water freezing in a freezer, as long as the surroundings gain at least as much entropy.

Myth: A refrigerator breaks the second law because it moves heat from cold to hot.

Physics: The law forbids heat flowing from cold to hot on its own. A refrigerator uses electrical work to do it, and the total entropy still rises.

Myth: Better engineering will one day give a 100% efficient heat engine.

Physics: The Carnot limit comes from the second law itself, not from poor design. Any engine with a cold side above absolute zero must reject some heat.

Myth: Entropy simply means messiness.

Physics: Entropy measures how many microscopic ways energy can be arranged. A messy bedroom has almost the same thermodynamic entropy as a tidy one.

Key Facts

  • The second law of thermodynamics says the total entropy of an isolated system never decreases.
  • Heat flows on its own only from a hotter object to a colder one.
  • No engine running in a cycle can turn all the heat it absorbs into work.
  • The best possible engine efficiency is the Carnot limit, 1 − Tc/Th, with temperatures in kelvin.
  • Refrigerators and heat pumps move heat from cold to hot only by using work.
  • Sadi Carnot, Rudolf Clausius and Lord Kelvin built the law between 1824 and 1854.
  • Boltzmann showed the law is statistical: entropy rises because spread-out states vastly outnumber ordered ones.
Did you know? If you shuffle a sorted deck of cards, it almost never returns to perfect order. With 52 cards there are about 8 × 10^67 possible orders, and the second law works the same way with the far larger number of ways molecules can share energy.

Quick Quiz: How Well Do You Know Second Law of Thermodynamics?

6 questions. Tap an answer to check it.

  1. According to the second law, heat flows on its own from…

  2. What happens to the total entropy of an isolated system during a real process?

  3. An ideal engine runs between 600 K and 300 K. What is its maximum efficiency?

  4. Which device moves heat from a cold place to a warm place by using work?

  5. Who first analyzed the limits of steam engines in 1824?

  6. To raise the Carnot efficiency of an engine, you should…

Frequently Asked Questions

What is the second law of thermodynamics in simple terms?

In simple terms, the second law says energy tends to spread out. Heat moves from hot things to cold things by itself, never the other way, and once energy has spread out it cannot gather back up without outside work. A measure called entropy tracks this spreading, and for an isolated system the total entropy always stays the same or increases.

What is the formula for the second law of thermodynamics?

The general form is ΔS ≥ 0 for an isolated system, meaning total entropy never falls. For heat Q added reversibly at a constant absolute temperature T, the entropy change is ΔS = Q / T. The law also gives the maximum engine efficiency, e = 1 − Tc / Th, where Tc and Th are the cold and hot reservoir temperatures in kelvin.

What is an example of the second law of thermodynamics?

A glass of ice water on a summer day is a clear example. Heat flows from the warm air and table into the cold glass until the ice melts and the water reaches room temperature. The reverse, room-temperature water spontaneously freezing while the air gets warmer, never happens, even though it would not break energy conservation.

Why is the second law of thermodynamics important?

It decides which processes can happen on their own and sets limits on technology. Engineers use it to find the best possible efficiency of engines, power plants, refrigerators and heat pumps. Chemists use it to predict which reactions run spontaneously. It also explains why many everyday events, like mixing and cooling, only run one way in time.

Does the second law of thermodynamics apply to living things?

Yes. Living things build ordered structures and keep their own entropy low, but they do it by taking in energy as food or sunlight and releasing heat and waste. When you count the organism together with its surroundings, the total entropy always increases. Life is a local pocket of order paid for by a larger increase in disorder around it.

What is the difference between the first and second law of thermodynamics?

The first law says energy is conserved: the change in internal energy equals heat added minus work done. It says nothing about direction. The second law adds the direction, stating that heat flows from hot to cold and that entropy never decreases in an isolated system. The first law limits how much energy you have, the second limits how much of it is usable.

Who discovered the second law of thermodynamics?

No single person discovered it. Sadi Carnot analyzed heat engines in 1824 and found the key role of temperature difference. Rudolf Clausius laid the foundation of the law in 1850 and published his statement in 1854, and Lord Kelvin gave his engine statement in 1851. Ludwig Boltzmann later explained the law in terms of molecular statistics.

Can the second law of thermodynamics be broken?

For large everyday systems, it has never been observed to break. For a few molecules over very short times, entropy can dip briefly because of random motion, and lab experiments have measured this. These dips average out quickly, so for anything big enough to see, the second law holds as firmly as any rule in physics.

Why can't a heat engine be 100 percent efficient?

A heat engine must release some heat to a colder reservoir to complete its cycle, because turning all the absorbed heat into work would lower the total entropy. The Carnot formula shows the limit: efficiency equals 1 minus Tc divided by Th. It could only reach 1 if the cold side were at absolute zero, which cannot be reached.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.