
At a Glance
The third law says the entropy of a perfect crystal goes to zero as its temperature goes to absolute zero: S → 0 as T → 0 K. Using Boltzmann's formula S = k_B ln W, a perfect crystal has only one possible arrangement (W = 1), so S = 0, and no finite cooling process can reach exactly 0 K.
- Discovered by
- Walther Nernst, 1906 to 1912 (Nernst heat theorem)
- Statement
- Entropy approaches a constant minimum as T → 0 K; zero for a perfect crystal
- Formula
- S = kB ln W, with W = 1 giving S = 0
- Consequence
- Absolute zero cannot be reached in a finite number of steps
- SI unit of entropy
- joule per kelvin (J/K)
- Absolute zero
- 0 K = −273.15 °C = −459.67 °F
On this page
- What Is the Third Law of Thermodynamics?
- The Third Law Explained Simply
- What Formula Describes the Third Law?
- Why Can't We Reach Absolute Zero?
- Do Real Materials Have Zero Entropy at Absolute Zero?
- Where Does the Third Law Matter in Practice?
- Who Discovered the Third Law of Thermodynamics?
- Going Deeper: What Else Does the Third Law Predict?
- How Can You Check Your Understanding of the Third Law?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is the Third Law of Thermodynamics?
The third law describes what happens to matter as it gets colder and colder. As the temperature approaches absolute zero, 0 K, the entropy of a system levels off at its lowest possible value. For a perfect crystal, where every atom sits in a single, fully ordered arrangement, that lowest value is exactly zero.
The law has a second, practical form: absolute zero cannot be reached in a finite number of steps. Each step of cooling gets you closer, but each one also removes a smaller amount of heat than the step before, so the final goal keeps slipping away.
The third law completes the four laws of thermodynamics. The zeroth law defines temperature, the first conserves energy, the second law says entropy tends to grow, and the third sets the floor that entropy can fall to.
The Third Law Explained Simply
Think of entropy as a count of how many different ways the pieces of a system can be arranged while it looks the same from the outside. A messy bedroom has a huge number of possible arrangements; a perfectly tidy one where everything has a fixed place has only one.
When matter is warm, its atoms jiggle and can sit in many slightly different ways, so the count is large. Cool it down and the jiggling calms. At absolute zero, a perfect crystal would settle into the single lowest-energy arrangement, with nothing left to shuffle. One arrangement means zero entropy.
The catch is that getting the very last bit of motion out is impossibly hard. It is like trying to empty a bucket by removing half the water each time: you can get as close to empty as you like, but you never quite finish.

What Formula Describes the Third Law?
The third law is often written as a limit:
The constant
The formula also shows why entropy grows so quickly with size. Every independent two-way choice doubles
Boltzmann's formula links entropy to the number of ways a system can be arranged, and it shows directly why a perfect crystal at absolute zero has zero entropy.
| Symbol | Quantity | SI unit |
|---|---|---|
| entropy | joule per kelvin (J/K) | |
| Boltzmann constant (1.381 × 10⁻²³ J/K (exact: 1.380649 × 10⁻²³)) | joule per kelvin (J/K) | |
| number of microstates | dimensionless (1) |
Rearranged to find another variable:
Valid for: statistical definition; equally probable microstates.
Example 1 Entropy of a tiny magnetic crystal
A tiny model crystal has 20 magnetic atoms, and each can point either up or down with equal energy, giving W = 2²⁰ = 1,048,576 possible arrangements. What is the entropy of this set of arrangements?
- Given:
- Boltzmann constant:
- number of microstates:
- Boltzmann constant:
- Formula:
- Substitute:
- Answer:
If the crystal is cooled until all 20 atoms line up the same way, W drops to 1 and the entropy drops to exactly zero, as the third law describes.
Why Can't We Reach Absolute Zero?
Cooling something means pulling heat out of it, usually by putting it in contact with something colder or by making it do work as it expands or demagnetizes. Near absolute zero, every material's ability to store heat, its heat capacity, shrinks toward zero. There is less and less heat to remove, and each cooling cycle can take away only a fraction of what remains.
The table below shows an idealized process where every step halves the temperature. After 10 steps a sample that started at 1 K sits just below one thousandth of a kelvin, and after 20 steps it is below one millionth. The numbers keep falling, but none of them is ever zero.
In the language of the third law, the entropy curves for different states of a material all meet at the same point at 0 K. A cooling process that jumps between those curves can only creep toward that meeting point, never land on it. This is the unattainability principle that Nernst stated in 1912.
| Cooling step | Temperature (K) | Fraction of starting temperature |
|---|---|---|
| 0 (start) | 1 | 1 |
| 1 | 0.5 | 1/2 |
| 2 | 0.25 | 1/4 |
| 3 | 0.125 | 1/8 |
| 5 | 0.03125 | 1/32 |
| 10 | 0.0009766 | 1/1,024 |
| 20 | 0.0000009537 | 1/1,048,576 |
| Any finite number n | 1/2ⁿ, never 0 | 1/2ⁿ |
| Source: Computed with T = (1 K) × (1/2)ⁿ; an idealized model, not a specific refrigerator · Retrieved October 2026 | ||

Do Real Materials Have Zero Entropy at Absolute Zero?
Not always. The third law promises zero entropy only for a perfect crystal in its single lowest-energy state. Many real solids freeze with some disorder locked in, because their molecules get stuck in arrangements that have almost the same energy. The leftover entropy is called residual entropy.
Carbon monoxide is a classic case. The CO molecule looks nearly the same from both ends, so in the crystal each molecule can point either way with almost no energy difference, and the choice freezes in at random. Ordinary ice is another: its hydrogen atoms can arrange themselves in many ways that all respect the bonding rules. The two worked examples below estimate how much entropy is left over.
Glasses, which are frozen liquids with no regular crystal pattern, also keep a residual entropy. None of these cases breaks the third law. They are simply not perfect crystals in true equilibrium.
Example 2 Leftover entropy in solid carbon monoxide
In a crystal of carbon monoxide, each CO molecule can freeze in pointing one of two nearly equal ways, so W = 2 for every molecule. Estimate the leftover entropy of one mole of molecules (N = 6.022 140 76 × 10²³) frozen in at random.
- Given:
- N:
- Boltzmann constant:
- N:
- Formula:
- Substitute:
- Answer:
This equals R ln 2. Measured values for carbon monoxide are somewhat lower, because the molecules are not perfectly random, but they are clearly above zero.
Example 3 Pauling's estimate for ordinary ice
In ice, the hydrogen atoms can sit in many arrangements that all obey the bonding rules. Linus Pauling estimated about 3/2 arrangements per molecule, so W = (3/2)^N. Estimate the leftover entropy of one mole of ice (N = 6.022 140 76 × 10²³).
- Given:
- N:
- Boltzmann constant:
- N:
- Formula:
- Substitute:
- Answer:
Careful heat measurements on ice in the 1930s found leftover entropy of about 3.4 J/K per mole, a close match to this simple counting estimate.
Where Does the Third Law Matter in Practice?
The third law shapes several fields of science and technology:
- Quantum computers. Many designs run inside dilution refrigerators at a few thousandths of a kelvin, close to but never at absolute zero.
- Superconducting magnets. MRI scanners keep their coils at about 4 K with liquid helium, where electrical resistance vanishes.
- Chemistry tables. Because a perfect crystal has zero entropy at 0 K, chemists can list absolute entropies for substances, measured by adding up heat taken in from near 0 K upward.
- Atomic physics. Laser cooling and evaporation chill clouds of atoms to below a millionth of a kelvin, producing new states of matter such as Bose-Einstein condensates.
- Space telescopes. Infrared detectors are cooled to a few kelvin so their own warmth does not drown out faint signals from space.
| Situation | Typical temperature (K) | Typical temperature (°C) |
|---|---|---|
| Comfortable room | about 293 | about 20 |
| Dry ice turning to gas (1 atm) | about 195 | about −78 |
| Liquid nitrogen boiling (1 atm) | about 77 | about −196 |
| Liquid helium-4 boiling (1 atm) | about 4.2 | about −269 |
| Cosmic microwave background | about 2.7 | about −270.5 |
| Helium-3 refrigerator | about 0.3 | about −272.85 |
| Dilution refrigerator | a few thousandths | just above −273.15 |
| Laser-cooled atom clouds | below one millionth | just above −273.15 |
| Absolute zero | 0 (never reached) | −273.15 |
| Source: Typical values; °C computed with °C = K − 273.15 · Retrieved October 2026 | ||

Who Discovered the Third Law of Thermodynamics?
The German chemist Walther Nernst developed the third law between 1906 and 1912. Studying chemical reactions at low temperatures, he proposed in 1906 what became known as the Nernst heat theorem: as temperature approaches zero, the entropy change in a reaction between pure crystalline solids approaches zero. In 1912 he added the statement that absolute zero cannot be reached. Nernst received the 1920 Nobel Prize in Chemistry for his work in thermochemistry.
Max Planck soon strengthened the theorem, proposing that the entropy of a perfect crystal is not just constant but exactly zero at absolute zero. Boltzmann's earlier formula gave that statement a clear meaning: zero entropy is a single microstate.
The law was tested in the cold laboratories of the early 1900s. Heike Kamerlingh Onnes first liquefied helium in 1908, opening the range of temperatures just a few kelvin above zero, and later researchers pushed far lower without ever reaching 0 K.
Going Deeper: What Else Does the Third Law Predict?
Because entropy flattens out near absolute zero, several other properties must flatten out too. Heat capacities of all materials fall toward zero as the temperature does, which is why a tiny amount of heat warms an ultracold sample a great deal. Thermal expansion also vanishes: near 0 K, solids stop changing size as they warm slightly.
The third law is a statement about equilibrium. Systems that are stuck out of equilibrium, like glasses and the residual-entropy crystals above, can hold extra entropy because they never reach their true lowest state in any reasonable time. Physicists sometimes phrase the law more carefully as applying only to systems in internal equilibrium.
The law sits most naturally inside quantum mechanics. Classical physics, where energy can take any value, predicts heat capacities that stay finite at low temperature, which experiments rule out. The quantum picture, where a system has a well-defined lowest energy state, explains why the third law works.
How Can You Check Your Understanding of the Third Law?
Try explaining in your own words why a perfect crystal at 0 K has W = 1, then compute the entropy of a few small systems with Boltzmann's formula. Review how temperatures convert to the kelvin scale, and take the quiz below to test the main ideas.
Common Misconceptions
Myth: Scientists have cooled things to exactly absolute zero.
Physics: No experiment has reached 0 K, and the third law says none can in a finite number of steps. Records come extremely close, but always stay above zero.
Myth: At absolute zero, all motion stops completely.
Physics: Quantum mechanics says particles keep a minimum zero-point energy and motion even in their lowest state. What vanishes is the thermal motion and the entropy of a perfect crystal.
Myth: Every substance has zero entropy at absolute zero.
Physics: Only perfect crystals in true equilibrium do. Glasses and crystals with frozen-in disorder, like ice, keep some residual entropy.
Myth: The third law is just the second law applied at low temperature.
Physics: It is a separate law. The second law says how entropy changes; the third law fixes the value entropy approaches at absolute zero.
Key Facts
- The third law states that a system's entropy approaches a constant minimum as its temperature approaches absolute zero.
- For a perfect crystal, that minimum is exactly zero, because only one arrangement (W = 1) is possible.
- Absolute zero, 0 K or −273.15 °C, cannot be reached in a finite number of steps.
- Walther Nernst developed the law between 1906 and 1912, and it is also called the Nernst heat theorem.
- Boltzmann's formula S = k_B ln W explains the law: ln 1 = 0, so a single microstate means zero entropy.
- Some solids, such as ice and carbon monoxide, keep a small residual entropy because disorder is frozen in.
- Heat capacities of all materials fall toward zero as the temperature approaches absolute zero.
Quick Quiz: How Well Do You Know Third Law of Thermodynamics?
6 questions. Tap an answer to check it.
According to the third law, what is the entropy of a perfect crystal at absolute zero?
A perfect crystal at 0 K has one microstate, W = 1, and k_B ln 1 = 0.
What does the third law say about reaching absolute zero?
Each cooling step removes less heat, so 0 K can be approached but never reached.
Who is credited with developing the third law between 1906 and 1912?
Walther Nernst proposed the heat theorem in 1906 and the unattainability statement in 1912.
In S = k_B ln W, what does W stand for?
W is the number of microscopic arrangements consistent with the system's overall state.
Why does ordinary ice keep some entropy near absolute zero?
Frozen-in disorder of the hydrogen positions leaves residual entropy, so ice is not a perfect crystal.
What is absolute zero on the Celsius scale?
0 K equals −273.15 °C; −459.67 is the Fahrenheit value.
Frequently Asked Questions
What is the third law of thermodynamics in simple terms?
The third law says that as something gets colder and approaches absolute zero, its disorder, measured as entropy, drops to a minimum. For a perfect crystal, the entropy at absolute zero would be exactly zero. It also says you can never actually reach absolute zero, because each cooling step removes less heat than the one before.
What is the formula for the third law of thermodynamics?
The third law is usually written as a limit: S approaches S0 as T approaches 0 K, with S0 = 0 for a perfect crystal. Boltzmann's formula, S = k_B ln W, explains it. A perfect crystal at absolute zero has only one possible arrangement, so W = 1, and since ln 1 = 0, the entropy is zero.
Who discovered the third law of thermodynamics?
The German chemist Walther Nernst developed it between 1906 and 1912, which is why it is also called the Nernst heat theorem. Max Planck sharpened it soon after, proposing that the entropy of a perfect crystal is exactly zero at absolute zero. Nernst received the 1920 Nobel Prize in Chemistry for his work in thermochemistry.
Why can't absolute zero be reached?
As a sample gets colder, its heat capacity shrinks and each cooling cycle can remove only a fraction of the remaining heat. You get closer with every step, but never all the way, much like halving a distance over and over. The third law states this formally: no process can reach 0 K in a finite number of operations.
What is the coldest temperature ever achieved?
Laboratories have cooled clouds of atoms to well below a billionth of a kelvin above absolute zero, using laser cooling followed by other techniques. These records keep improving, but each one is still a small positive temperature. Reaching exactly 0 K remains impossible, just as the third law of thermodynamics predicts.
What is residual entropy?
Residual entropy is the entropy a substance still has near absolute zero because some disorder froze in as it cooled. In carbon monoxide crystals, molecules point one of two ways at random; in ice, the hydrogen atoms can take many allowed positions. These materials are not perfect crystals in equilibrium, so they do not reach zero entropy.
How is the third law different from the second law?
The second law says the total entropy of an isolated system never decreases, so it describes the direction in which processes run. The third law sets the reference point: it says what entropy approaches as temperature goes to zero. Together they let scientists give absolute entropy values to substances instead of only measuring changes.
What is absolute zero in Celsius and Fahrenheit?
Absolute zero is 0 kelvin, which equals exactly −273.15 °C and −459.67 °F. It is the lowest temperature physically possible, the point at which a system would be in its lowest energy state. The kelvin scale starts there, which is why temperatures in thermodynamics formulas are always written in kelvin.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








