Bottling a star

Fusion Reactors (Tokamaks)

A fusion reactor is a machine that joins light nuclei, usually deuterium and tritium, to release energy, the same process that powers the Sun. The most developed design, the tokamak, heats the fuel into a plasma of about 150 million °C and holds it inside a doughnut-shaped vessel with powerful magnetic fields, so the scorching gas never touches the walls.

Inside the ring-shaped vacuum vessel of a tokamak fusion reactor, with a faint pink plasma glow along the tiled walls
The plasma fills a ring-shaped vessel and is held away from the tiled walls by magnetic fields.

At a Glance

A fusion reactor heats deuterium and tritium into a plasma above 100 million °C and confines it with magnetic fields so the nuclei collide fast enough to fuse. Each D-T reaction releases about 17.6 MeV, which comes from lost mass through E = mc². The fast neutrons carry most of that energy into a surrounding blanket, where it becomes heat.

What it does
Fuses light nuclei in a confined plasma to release heat
Main fuel
Deuterium and tritium, two heavy forms of hydrogen
Formula
E = mc²; one D-T reaction releases about 17.6 MeV
Plasma temperature
About 150 million °C, roughly ten times the Sun's core
Leading designs
Tokamak, stellarator, laser-driven inertial fusion
Status
Experimental; no plant yet sends power to the grid
On this page
  1. What Is a Fusion Reactor?
  2. How Does a Tokamak Work Step by Step?
  3. What Are the Main Parts of a Fusion Reactor?
  4. How Do Magnets Hold a Plasma Hotter Than the Sun?
  5. Where Does Fusion Energy Come From?
  6. Why Does Fusion Need Such High Temperatures?
  7. What Fuel Does a Fusion Reactor Use?
  8. What Are the Different Types of Fusion Reactors?
  9. How Close Are We to Fusion Power?
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Is a Fusion Reactor?

A fusion reactor is a device built to release energy by nuclear fusion, the joining of two light nuclei into a heavier one. Stars do this with gravity: the crushing weight of the Sun keeps its core dense and hot for billions of years. On Earth we cannot use gravity, so a reactor must create the right conditions with heat, magnetic fields or lasers.

The goal is the reverse of a normal nuclear reactor. A fission reactor splits heavy uranium nuclei; a fusion reactor builds light nuclei up. Both turn a small amount of mass into a large amount of heat, but fusion fuel is drawn from water and lithium, and the reaction leaves no long-lived spent fuel.

No fusion plant sends electricity to the grid yet. Today's machines are experiments that test how to heat, hold and control the fuel. Several large projects aim to show that a reactor can give out far more fusion power than it takes in.

How Does a Tokamak Work Step by Step?

A tokamak is a doughnut-shaped vacuum chamber wrapped in magnets. The name comes from a Russian phrase for a toroidal chamber with magnetic coils. Here is what happens in a typical pulse:

  1. Pump out the air. The chamber is emptied to a very high vacuum so that stray atoms do not cool or pollute the fuel.
  2. Puff in the fuel. A small amount of deuterium and tritium gas, only a fraction of a gram, is let into the chamber.
  3. Make a plasma. A central coil drives a large electric current through the gas. The current strips electrons from the atoms and turns the gas into a plasma, a soup of bare nuclei and free electrons.
  4. Hold it with magnets. Coils around the ring create a strong field running the long way around the doughnut, and the plasma current adds a field that wraps around the plasma. Together they make twisted field lines that the charged particles follow without hitting the wall.
  5. Heat it further. Beams of fast neutral atoms and powerful radio waves push the temperature beyond 100 million °C.
  6. Fuse and capture. Nuclei collide hard enough to fuse. Neutrons escape the magnetic field, fly into the surrounding blanket and deposit their energy as heat, which could raise steam for a turbine.

What Are the Main Parts of a Fusion Reactor?

A tokamak combines some of the hottest and coldest objects on Earth only a couple of meters apart. The plasma sits at well over 100 million °C, while the superconducting coils that confine it are chilled with liquid helium to about 4 K, just above absolute zero. Thick shielding and a vacuum gap keep the two apart.

The table lists the key parts. The vacuum vessel holds the plasma, the magnet coils shape and steady it, and the divertor at the bottom acts as an exhaust that removes helium ash and impurities. The blanket lines the inner wall, catches neutrons and, in a working plant, breeds new tritium fuel. Outside sits a cryostat, a giant vacuum flask around the cold magnets.

The magnets work on the same principle as any electromagnet or solenoid: current flowing in loops of wire creates a magnetic field. Using superconducting wire lets enormous currents flow with almost no resistance and no wasted heat.

Main parts of a tokamak fusion reactor
PartTypical material or formJob
Vacuum vesselDouble-walled steel torusHolds the plasma in a very high vacuum
Toroidal field coilsSuperconducting niobium-tin or similar wireMake the strong field running around the ring
Central solenoidSuperconducting coil in the center holeDrives the plasma current like a transformer
Poloidal field coilsRing-shaped superconducting coilsShape the plasma and hold it in position
BlanketSteel modules with lithium-bearing materialAbsorbs neutrons, collects heat, breeds tritium
DivertorTungsten armor tilesExhausts helium ash and impurities, takes the heaviest heat load
Heating systemsNeutral beam injectors, radio-frequency antennasRaise the plasma above 100 million °C
CryostatLarge steel vacuum chamberInsulates the magnets kept near 4 K
Source: General description of tokamak designs; materials vary between machines · Retrieved October 2026
A huge tokamak fusion machine in an assembly hall, a round steel body ringed by thick magnet coils and pipework
A large tokamak is a ring of superconducting magnets, vacuum vessel and shielding many meters across.

How Do Magnets Hold a Plasma Hotter Than the Sun?

A plasma is made of charged particles, and a magnetic force on a moving charge always acts at right angles to its motion. The result is that each nucleus and electron spirals tightly around a field line instead of flying straight to the wall. The particles can slide freely along the lines but find it very hard to cross them.

A ring-shaped field alone would leak, because the field is stronger on the inner side of the doughnut than the outer side, and that difference makes particles drift outward. The fix is to twist the field lines into a helix, so every particle spends equal time on the inside and outside of the ring and the drifts cancel. In a tokamak the twist comes from the current flowing in the plasma itself; the diagram shows the circular field it creates around the plasma.

Confinement is never perfect. Turbulence and sudden instabilities let heat leak out, and a large unplanned loss, called a disruption, can dump the plasma's energy onto the wall in milliseconds. Much of fusion research is about taming these effects.

Circular magnetic field lines around a current flowing out of the page, a simplified view of the field made by a tokamak's plasma current
Simplified view: the current flowing in the plasma wraps it in circular field lines, which add the twist that keeps particles confined.

Where Does Fusion Energy Come From?

When a deuterium nucleus and a tritium nucleus fuse, they form a helium-4 nucleus, also called an alpha particle, and a free neutron. The products are slightly lighter than the fuel. That missing mass reappears as energy following mass-energy equivalence, and the difference in binding energy is what makes the reaction worthwhile.

The released energy is shared unevenly. Momentum must balance, so the light neutron flies off with about four fifths of it and the heavier alpha particle takes the rest. The alpha particle is charged, stays trapped by the magnetic field and helps keep the plasma hot. The neutron is neutral, escapes straight away and carries its energy into the blanket, as the energy chart shows.

The examples below work out the energy from one reaction and how little mass a full-size plant would convert each day. You can try other masses in our E = mc² calculator.

Every joule a fusion reactor makes comes from a tiny loss of mass, and this equation turns that mass into energy.

E=mc2
What each symbol means
SymbolQuantitySI unit
Erest energyjoule (J)
mrest masskilogram (kg)
cspeed of light in vacuum (2.998 × 10⁸ m/s (exact: 299 792 458 m/s))meter per second (m/s)

Rearranged to find another variable:

m=Ec2

Valid for: rest energy of a body at rest; moving body: E = γmc².

Example 1 Energy from one deuterium-tritium fusion

A deuteron (2.013 553 212 544 u) fuses with a triton (3.015 500 715 97 u) to make an alpha particle (4.001 506 179 129 u) and a neutron (1.008 664 916 06 u). Using 1 u of mass = 931.494 103 72 MeV, how much energy is released?

  1. Given:
    • m_D: mD=2.014 u
    • m_T: mT=3.016 u
    • m_a: ma=4.002 u
    • m_n: mn=1.009 u
  2. Formula: Q=(mD+mT−mα−mn)c2
  3. Substitute: mD=2.014 u,mT=3.016 u,ma=4.002 u,mn=1.009 u
  4. Answer: Q=17.59 MeV

The products weigh slightly less than the fuel, and that missing sliver of mass appears as kinetic energy of the alpha particle and the neutron.

Example 2 Mass turned into energy in one day

A future power plant produces 500 MW of fusion power, or 5 × 10^8 J every second, for a full day of 86,400 s. How many grams of mass are converted into energy?

  1. Given:
    • P: P=500,000,000 W
    • t: t=86,400 s
    • speed of light in vacuum: c=299,792,458 m/s
  2. Formula: m=Ptc2
  3. Substitute: P=500,000,000 W,t=86,400 s,c=299,792,458 m/s
  4. Answer: m=0.4807 g

Less than half a gram of mass disappears in a whole day, which shows how concentrated nuclear energy is.

Energy bar chart of one D-T fusion: 17.59 MeV of motion becomes 3.54 MeV of plasma heat and 14.05 MeV of blanket heat
The alpha particle's 3.54 MeV keeps the plasma hot, while the neutron's 14.05 MeV becomes heat in the blanket (computed from CODATA 2022 masses).

Why Does Fusion Need Such High Temperatures?

Nuclei are positively charged and repel each other strongly. Before they get close enough for the short-range strong nuclear force to grab them, they must push through this electric barrier. Only very fast nuclei manage it, and high speed in a gas means high temperature. Quantum tunneling helps, letting nuclei slip through the barrier a little before they reach the top.

Heat is only one requirement. A reactor also needs enough nuclei packed together, and it must keep the heat in long enough for many reactions to happen. Physicists combine these into the Lawson criterion: the product of plasma density, temperature and energy confinement time must pass a threshold. A tokamak works with a thin plasma held for seconds, while laser fusion squeezes a tiny pellet to enormous density for a few billionths of a second.

The Sun's core is only about 15 million °C, so why must a reactor be ten times hotter? The Sun has a huge volume and endless time, so even rare reactions add up. A reactor is tiny by comparison and must make fusion happen much faster.

What Fuel Does a Fusion Reactor Use?

The easiest reaction to achieve uses deuterium and tritium, two isotopes of hydrogen. Deuterium is stable and plentiful: roughly one hydrogen atom in every few thousand in seawater is deuterium, and it can be separated cheaply. Tritium is the problem. It is radioactive with a half-life of about 12.3 years, so almost none exists naturally.

The plan is for a reactor to make its own tritium. When a fusion neutron strikes a lithium-6 nucleus in the blanket, it produces a tritium nucleus and a helium nucleus. Since each fusion releases one neutron and each neutron can make at most about one tritium, designers add materials that multiply neutrons to keep the fuel cycle closed.

The amounts involved are tiny. As the example below shows, a plant producing hundreds of megawatts of fusion power would burn only on the order of a hundred grams of fuel per day.

Example 3 How much fuel does a day of fusion burn?

The same 500 MW plant runs for 86,400 s. Each reaction releases 17.59 MeV and uses one deuteron plus one triton, a combined 5.029 u. How many grams of fuel are consumed?

  1. Given:
    • P: P=500,000,000 W
    • t: t=86,400 s
    • Q: Q=17.59 MeV
    • m_DT: mDT=5.029 u
  2. Formula: mfuel=PtQ(mD+mT)
  3. Substitute: P=500,000,000 W,t=86,400 s,Q=17.59 MeV,mDT=5.029 u
  4. Answer: mfuel=128 g

A coal plant giving the same heat for a day would burn roughly 1,500 tonnes of coal, while this reactor uses about the mass of a small apple.

What Are the Different Types of Fusion Reactors?

Tokamaks are the most studied design. They use a strong ring-shaped field from external coils plus a current in the plasma. Their weakness is that the plasma current can become unstable and must be started in pulses unless it is driven by other means.

Stellarators twist the field with complicated three-dimensional coils instead of a plasma current. They are much harder to design and build, but they can in principle run steadily without disruptions. Inertial confinement skips magnets altogether: powerful lasers or particle beams crush a fuel capsule smaller than a peppercorn so fast that it fuses before it can fly apart.

Other ideas include spherical tokamaks, which squeeze the doughnut into a shape closer to a cored apple, and magnetized target fusion, which compresses a magnetized plasma with pistons or liquid metal. Private companies are testing several of these.

How Close Are We to Fusion Power?

The first tokamaks were built in the Soviet Union in the 1950s, and in the late 1960s their high plasma temperatures convinced labs worldwide to adopt the design. Large machines followed, including the Joint European Torus in the United Kingdom, which set fusion energy records with deuterium-tritium fuel and, in its final campaign in 2023, released about 69 megajoules in a single pulse of roughly five seconds.

In December 2022, the National Ignition Facility in California reached ignition with lasers, getting about 3.15 MJ of fusion energy from a capsule hit by about 2.05 MJ of laser light. That counts only the light reaching the target, not the far larger electricity used to power the lasers.

ITER, under construction in southern France, is designed to produce 500 MW of fusion power from 50 MW of heating, a gain of ten. Big challenges remain: wall materials that survive years of neutron bombardment, reliable tritium breeding, and turning the heat into electricity cheaply enough to compete. Compare the two nuclear routes on our fission vs fusion page.

Selected fusion devices and milestones
DeviceTypeLocationMilestone
T-3TokamakSoviet UnionLate 1960s plasma temperatures put tokamaks in the lead
Joint European Torus (JET)TokamakUnited KingdomAbout 69 MJ of fusion energy in one pulse, 2023
National Ignition FacilityLaser inertial fusionUnited StatesFirst ignition, about 3.15 MJ out for 2.05 MJ of laser light, 2022
Wendelstein 7-XStellaratorGermanyTests steady, current-free confinement
ITERTokamakFranceDesigned for 500 MW of fusion power from 50 MW of heating
Source: Published milestones of each program, values rounded · Retrieved October 2026

Common Misconceptions

Myth: A fusion reactor could explode like a hydrogen bomb.

Physics: The plasma holds only a tiny amount of fuel at very low density. If anything goes wrong, it cools within seconds and fusion simply stops.

Myth: Fusion power produces no radioactivity at all.

Physics: Tritium is radioactive and fast neutrons make the reactor's structure radioactive over time, but the waste is far shorter lived than spent fission fuel.

Myth: The hot plasma would melt the walls of the reactor.

Physics: The plasma is extremely thin and held away from the walls by magnetic fields, so its total heat content is modest compared with its temperature.

Key Facts

  • A fusion reactor joins light nuclei, usually deuterium and tritium, and releases energy from the small loss of mass.
  • One deuterium-tritium reaction releases about 17.6 MeV, shared by a helium-4 nucleus and a fast neutron.
  • A tokamak holds a plasma of about 150 million °C in a doughnut-shaped vessel using twisted magnetic fields.
  • The neutron carries about four fifths of the energy into the blanket, where it becomes heat.
  • Tritium is scarce, so a working reactor must breed it from lithium in its blanket.
  • A fusion reactor holds only a fraction of a gram of fuel at any moment, so a runaway reaction cannot happen.
  • No fusion plant yet supplies electricity; ITER aims to make ten times more fusion power than its heating power.
Did you know? The superconducting magnets of a large tokamak sit at about 4 K, only a few degrees above absolute zero, only a couple of meters from a plasma that is hotter than the center of the Sun.

Quick Quiz: How Well Do You Know Fusion Reactors (Tokamaks)?

6 questions. Tap an answer to check it.

  1. Which two fuels are used in most fusion reactor designs?

  2. What holds the plasma away from the walls of a tokamak?

  3. Which product of D-T fusion carries most of the energy?

  4. Why must a reactor plasma be hotter than the Sun's core?

  5. How will a fusion power plant get its tritium?

  6. What happens if confinement fails in a fusion reactor?

Frequently Asked Questions

How does a fusion reactor work?

A fusion reactor heats hydrogen fuel, usually deuterium and tritium, until it becomes a plasma above 100 million °C. Magnetic fields in a tokamak or stellarator, or intense lasers in inertial fusion, confine the fuel long enough for nuclei to collide and fuse. The fast neutrons released carry energy into a blanket around the plasma, where it turns into heat that could drive a steam turbine.

What is a tokamak?

A tokamak is a doughnut-shaped vacuum chamber surrounded by superconducting magnets. Coils around the ring create a strong field that runs around the doughnut, and a current flowing through the plasma adds a field that wraps around it. The two combine into twisted field lines that trap the hot charged particles and keep them away from the walls.

Is there a working fusion reactor yet?

Many experimental fusion reactors work, and they regularly fuse nuclei, but none yet produces net electricity for the grid. The National Ignition Facility got more fusion energy out of a capsule than the laser energy that hit it in 2022. ITER in France is being built to show a power gain of ten in a tokamak, and power plants would come after it.

Why is fusion so hard to achieve on Earth?

Nuclei repel each other electrically, so they must collide at enormous speeds, which means temperatures over 100 million °C. The plasma must also be dense enough and stay hot long enough for many reactions to occur. Holding such a hot, unstable gas without letting it touch anything, while building materials that survive intense neutron bombardment, is a huge engineering task.

Is fusion energy safe?

Fusion is considered inherently safe from runaway accidents. The reactor holds only a fraction of a gram of fuel at a time, and any disturbance cools the plasma and stops the reaction within seconds. The main hazards are radioactive tritium, which must be carefully contained, and parts of the machine made radioactive by neutrons, which need shielding and disposal.

What is the difference between a fusion reactor and a nuclear reactor?

Today's nuclear power reactors use fission, splitting heavy uranium nuclei in a chain reaction. A fusion reactor joins light hydrogen nuclei instead. Fission fuel is mined uranium and leaves long-lived spent fuel, while fusion fuel comes from water and lithium and leaves mainly short-lived activated materials. Fission plants have operated for decades; fusion plants are still experimental.

How hot is the plasma in a fusion reactor?

A tokamak plasma typically reaches around 150 million °C, about ten times hotter than the core of the Sun. The reactor needs this extra heat because it is tiny compared with a star and cannot rely on enormous gravity and billions of years to make rare reactions add up. At these temperatures every atom is fully stripped of its electrons.

How long until fusion power plants exist?

Estimates vary widely. ITER plans its first full deuterium-tritium experiments in the late 2030s, and demonstration power plants based on its results would follow. Several private companies claim faster timelines with smaller machines. Most researchers expect fusion to start contributing electricity in the second half of this century rather than within the next decade.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.