Light phenomenon

Total Internal Reflection

Total internal reflection happens when light traveling in a denser medium, such as glass or water, meets the boundary with a less dense medium at an angle larger than the critical angle, and all of it reflects back inside. No light escapes. This effect keeps signals inside optical fibers, makes diamonds sparkle and turns a water surface into a mirror seen from below.

View from underwater of a bright circle of sky overhead surrounded by a mirror-like water surface reflecting the pool floor
Seen from below, water lets the sky through only in a bright circle; beyond it, the surface reflects all the light back down.

At a Glance

Total internal reflection is the complete reflection of light back into a denser medium when it strikes the boundary with a less dense medium at more than the critical angle. The critical angle is found from sin θc = n2 / n1, which gives about 48.8° for water to air and about 41.8° for glass with n = 1.5.

What it is
All light reflects back at a boundary, none is refracted out
Condition 1
Light goes from higher to lower refractive index (n1 > n2)
Condition 2
Angle of incidence greater than the critical angle
Critical angle
sin θc = n2 / n1
Water to air
θc ≈ 48.8° (computed for n = 1.33)
Main uses
Optical fibers, binocular prisms, gem cutting, sensors
On this page
  1. What Is Total Internal Reflection?
  2. Total Internal Reflection Explained Simply
  3. Why Does Total Internal Reflection Happen?
  4. What Are the Two Conditions for Total Internal Reflection?
  5. What Happens Step by Step as the Angle Increases?
  6. What Is the Critical Angle of Water, Glass and Diamond?
  7. Where Do You See Total Internal Reflection?
  8. Going Deeper: Can Light Leak Out During Total Internal Reflection?
  9. Which Light Phenomena Are Related to Total Internal Reflection?
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Is Total Internal Reflection?

When light reaches the surface between two transparent materials, it usually splits. Part of it crosses the boundary and bends, which is refraction, and part of it bounces back, which is ordinary reflection. Total internal reflection is the special case where the crossing part drops to zero and every bit of the light returns into the first material.

It can only happen on the inside of a denser material, which is why the word "internal" is in the name. Light inside a glass block, a drop of water or a plastic rod can be trapped this way. Light arriving from the air side can never be totally reflected, however steep its angle.

The reflection is truly total. A good silvered mirror absorbs a few percent of the light that hits it, but total internal reflection at a clean surface loses essentially nothing, which is why engineers prefer it whenever they can use it.

Total Internal Reflection Explained Simply

Light travels more slowly in water or glass than in air. When it leaves a slow material for a fast one, it bends away from the straight-down line, called the normal. Tilt the beam more and more, and the escaping ray leans further and further until it skims flat along the surface.

Tilt it even a little past that point and there is nowhere left for the ray to go. It cannot bend any further than flat, so it turns around and stays inside. Think of a ball rolled at a low wall: aim steeply and it hops over, but roll it at a shallow, glancing angle and it simply bounces off along the wall.

Why Does Total Internal Reflection Happen?

The bending of light at a boundary follows Snell's law, n1sin⁡θ1=n2sin⁡θ2, where n is the index of refraction of each material and the angles are measured from the normal. If light goes from glass (n = 1.5) into air (n = 1.0), the refracted angle is always bigger than the incident one.

As the incident angle grows, the refracted angle reaches 90°, its largest possible value. The incident angle at that moment is the critical angle, and setting θ2=90∘ in Snell's law gives sin⁡θc=n2n1. For any larger angle, Snell's law would demand a sine greater than 1, which no angle has, so no refracted ray can exist.

Energy has to go somewhere, and the only option left is the reflected ray. That is why, beyond the critical angle, the reflected beam suddenly carries all of the light instead of just a small share.

Ray diagram of light in glass of index 1.5 striking the boundary with air at 50 degrees and reflecting totally back into the glass
At 50°, beyond glass's critical angle of about 41.8°, the ray cannot refract into the air and is reflected completely.

What Are the Two Conditions for Total Internal Reflection?

Both of these must be true at the same time:

  1. Dense to less dense. The light must travel from a material with a higher refractive index into one with a lower index, such as water to air, glass to air or glass to water.
  2. Angle beyond critical. The angle of incidence, measured from the normal, must be larger than the critical angle for that pair of materials.

If the first condition fails, the critical angle does not exist at all, because n2n1 would be larger than 1. If the second fails, most of the light refracts out and only a weak reflection remains. The difference between the two behaviors is laid out in our reflection vs refraction comparison.

What Happens Step by Step as the Angle Increases?

Picture a narrow beam inside a glass block (n = 1.5) hitting the top face, with the angle slowly increased:

  1. Straight up (0°): the beam passes into the air without bending, and only about 4% reflects back.
  2. Moderate angles: the escaping ray bends away from the normal. At 30° inside the glass it leaves at about 48.6° in the air (computed with Snell's law).
  3. Getting close: at 40° inside, the escaping ray leaves at about 74.6° and grows dimmer, while the reflected ray grows brighter.
  4. The critical angle (about 41.8°): the escaping ray grazes along the surface at 90°.
  5. Beyond it: no light leaves, and the reflected ray carries everything, obeying the law of reflection with equal angles in and out.

You can trace these stages yourself in our refraction through a glass block experiment, or test any pair of angles with the Snell's law and critical angle calculator.

What Is the Critical Angle of Water, Glass and Diamond?

The higher the refractive index, the smaller the critical angle, and the easier it is to trap light. Water has a fairly large critical angle, so only light striking its surface at a glancing angle is reflected completely. Diamond has a very small one, so light that enters a cut stone is reflected again and again before it finds a way out.

The pair of materials matters too. Light going from glass into water meets a much larger critical angle than glass into air, because the two indices are closer. In an optical fiber the core and cladding differ only slightly, so light must run almost parallel to the fiber to stay trapped. The full formula, with worked problems, is on our critical angle page.

Critical angle for light leaving common materials
Light travels fromIntoRefractive indices (n1 → n2)Critical angle θc
IceAir1.31 → 1.0049.8°
WaterAir1.33 → 1.0048.8°
Acrylic plasticAir1.49 → 1.0042.2°
Crown glassAir1.52 → 1.0041.1°
Flint glassAir1.62 → 1.0038.1°
Cubic zirconiaAir2.17 → 1.0027.4°
DiamondAir2.42 → 1.0024.4°
Crown glassWater1.52 → 1.3361.0°
Fiber coreFiber cladding1.48 → 1.4680.6°
Source: Computed with θc = arcsin(n2/n1); refractive indices are typical values for visible light · Retrieved October 2026

Where Do You See Total Internal Reflection?

  • Optical fibers. Thin glass strands carry internet and phone signals across oceans by bouncing light along their length. Read how in optical fibers.
  • Sparkling gems. Diamond cutters angle the back facets so that light entering the top reflects inside and leaves through the front, making the stone flash with color.
  • Binoculars and periscopes. Glass prisms with 45° faces turn light through 90° or 180° more cleanly than mirrors. The periscope page shows the layout.
  • Snell's window. A diver looking up sees the whole sky squeezed into a bright circle overhead, about 97.5° across (computed as twice 48.8°). Outside the circle the surface acts as a silvery mirror reflecting the pool floor.
  • Medical endoscopes. Bundles of fibers carry light and images out of the body during keyhole surgery.
  • Car rain sensors and fingerprint readers. A drop of water or a fingertip touching the glass spoils the total reflection at that spot, and a sensor detects the change.
Fan of thin optical fibers in a dark room with bright points of light glowing only at their tips
Light travels inside each fiber by total internal reflection and only shows up where it escapes at the cut tips.

Going Deeper: Can Light Leak Out During Total Internal Reflection?

Even when no ray escapes, the light's electric field reaches a tiny distance past the surface, roughly one wavelength. This thin, fading field is called an evanescent wave, and it carries no energy away on its own.

If a second piece of glass is brought within that tiny gap, the evanescent wave can pass into it and some light crosses the gap. This effect is called frustrated total internal reflection. It is the optical cousin of quantum tunneling and is used in some beam splitters and touch screens.

Common Misconceptions

Myth: Total internal reflection can happen when light goes from air into water.

Physics: It only happens when light travels from the higher-index material toward the lower-index one. Going from air into water, light always has a refracted ray to follow.

Myth: Above the critical angle, light still leaks out a little, just like at a normal mirror.

Physics: At a clean surface essentially all the energy reflects back. Only if another material is brought within about a wavelength of the surface can some light tunnel across.

Myth: Rainbows are caused by total internal reflection inside raindrops.

Physics: Light reflects inside a raindrop, but at angles below the critical angle, so the reflection is only partial and most light passes out the back of the drop.

Key Facts

  • Total internal reflection sends all of the light back into the denser material, with no refracted ray.
  • It needs light moving from a higher to a lower refractive index, at an angle larger than the critical angle.
  • The critical angle comes from sin θc = n2 / n1 and shrinks as the index of the denser material rises.
  • The critical angle is about 48.8° for water to air and about 24.4° for diamond to air.
  • Optical fibers rely on it to carry light signals for many kilometers.
  • It reflects light more completely than a silvered mirror.
  • Light coming from air into water or glass can never be totally internally reflected.
Did you know? A diver underwater sees the entire sky above the horizon squeezed into one bright circle overhead, about 97.5° wide, while the rest of the surface looks like a mirror.

Quick Quiz: How Well Do You Know Total Internal Reflection?

6 questions. Tap an answer to check it.

  1. Which pair of materials can produce total internal reflection?

  2. What happens to the refracted ray at exactly the critical angle?

  3. Diamond has a higher refractive index than water. How does its critical angle compare?

  4. Which device depends mainly on total internal reflection?

  5. For light leaving glass (n = 1.5) into air, total internal reflection happens when the angle of incidence is:

  6. Why is the reflection called total?

Frequently Asked Questions

What is total internal reflection in simple words?

It is what happens when light inside water, glass or another clear material hits the surface at a shallow, glancing angle and cannot get out. Instead of passing through into the air, all of the light bounces back inside. The surface acts like a perfect mirror from the inside, even though it is completely transparent when you look straight through it.

What is the critical angle?

The critical angle is the angle of incidence, measured from the normal, at which the refracted ray just skims along the boundary at 90°. Any steeper angle of incidence produces total internal reflection. It depends on the two materials and is found with sin θc = n2 / n1. For glass with an index of 1.5 into air it is about 41.8°.

Why does total internal reflection only happen from a denser medium?

When light moves into a material with a higher index, it bends toward the normal, so the refracted angle is always smaller than the incident angle and there is always a valid path forward. Only when light bends away from the normal, going into a lower index, can the refracted angle hit 90° first. Past that point no refracted ray is possible.

How does total internal reflection work in optical fibers?

An optical fiber has a glass core wrapped in cladding with a slightly lower refractive index. Light sent into the core hits the core-cladding boundary at a glancing angle beyond the critical angle, so it reflects back each time. It zigzags along the core for long distances, losing very little energy, which lets fibers carry data across continents.

Why do diamonds sparkle so much?

Diamond has a very high refractive index of about 2.42, which gives it a small critical angle of roughly 24.4° to air. Light entering a well-cut diamond strikes the back facets beyond that angle and is reflected inside several times before leaving through the top. Diamond also spreads colors strongly, so the returning light flashes as bright, colorful sparkles.

Is total internal reflection better than a mirror?

In many ways, yes. A metal-coated mirror absorbs a few percent of the light each time, and its coating can tarnish. Total internal reflection at a clean glass surface reflects essentially all of the light and never wears out. That is why quality binoculars and cameras use glass prisms rather than mirrors to fold the light path.

Can you see total internal reflection at home?

Yes. Fill a clear glass with water and look up at the water surface from below and to the side. At a steep enough angle, the surface turns silvery and mirror-like. Another easy test is shining a laser pointer through the side of a plastic bottle with a stream of water pouring out of a hole: the light follows the curved stream.

What is Snell's window?

Snell's window is the bright circle a swimmer or fish sees when looking straight up at the water surface. Light from the whole sky bends as it enters the water and is squeezed into a cone about 97.5° wide. Outside that circle, light from below hits the surface beyond the critical angle and reflects back, so the surface looks like a mirror.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.