
At a Glance
A screw is one of the six simple machines. It is a ramp that winds around a post. Each turn moves the screw forward a short way with a lot of force. You turn many times, but each turn is easy.
- What it is
- A ramp wrapped around a post
- The ramp part
- Called the thread
- Kind of machine
- One of the six simple machines
- Easy examples
- Jar lid, bolt, corkscrew, light bulb base
- The trade
- Many easy turns instead of one hard push
On this page
What Is a Screw?
A screw is one of the six simple machines. It looks like a post with a spiral ridge around it. That ridge is called the thread.
Some screws are pointy and go into wood. Others are flat on the end, like a bolt. A jar lid has a thread too, hidden on the inside.
All of these work the same way. You turn them, and they move along a path that winds around and around.
Why Is a Screw Like a Ramp?
Picture a long, gentle ramp. Now imagine wrapping that ramp around a pencil. The edge of the ramp makes a spiral. That spiral is the screw's thread!
So a screw is really an inclined plane in disguise. A gentle ramp makes lifting easier, because you go up a little at a time. A screw does the same thing while it turns.
The pointy tip of a wood screw also acts like a wedge. It pushes the wood apart so the thread can bite in.

How Does a Screw Make Work Easier?
Each time you turn a screw once, it moves forward only a little. That little step is the space between two threads. Your hand, though, travels all the way around the screw.
Your hand moves a long way, and the screw moves a short way. That trade is the secret. A small twist from you becomes a big push on the wood or the lid.
Threads that sit close together give even more push. The catch is that you need more turns. Older students can learn the math on our screw and mechanical advantage pages.
What Two Jobs Can a Screw Do?
Screws help people in two big ways.
- Holding things together. A wood screw grips the wood with its thread. A bolt and nut squeeze two pieces tight. The thread stops them from slipping out.
- Lifting or moving things. A screw can push a heavy load up a bit with each turn. Some car jacks work this way. An old water screw can lift water uphill.
The thread also helps a screw stay put. Friction on the long winding thread keeps it from spinning loose.
What Are Some Examples of a Screw?
Look around your home. You will find screws in lots of places.
- Jar lid: the thread inside the lid matches a thread on the jar.
- Light bulb: the metal base twists into the lamp.
- Bottle cap: a few turns seal the drink inside.
- Corkscrew: the curly metal twists down into a cork.
- Bolt and nut: these hold bikes and swings together.
- Piano stool: some stools go up and down when you spin the seat.
| Object | Where is the thread? | What it helps with |
|---|---|---|
| Wood screw | Around the metal post | Holding boards together |
| Jar lid | Inside the lid and on the jar neck | Sealing food in tight |
| Light bulb | On the metal base | Holding the bulb in the lamp |
| Bolt and nut | On the bolt and inside the nut | Squeezing parts together |
| Corkscrew | The curly metal spiral | Pulling a cork out |
| Car jack | On a long metal rod | Lifting a car a little at a time |
| Source: Our own summary of common screw machines · Retrieved October 2026 | ||
Try It at Home: Can You Turn a Ramp Into a Screw?
You need a sheet of paper, a pencil, a ruler, scissors, tape and a marker. Ask an adult to help with the scissors.
- Draw a long triangle on the paper with the ruler. Make one side tall and one side long.
- Color the slanted edge with the marker.
- Cut out the triangle.
- Tape the tall side to the pencil.
- Roll the paper tightly around the pencil.
Look at the colored edge. It now winds around the pencil like a thread! Try again with a skinnier triangle. The ramp is gentler, so the thread winds closer together.

What Are Some Fun Facts About Screws?
- A very old water screw can lift water from a river to a field.
- It is often named after Archimedes, a thinker from ancient Greece.
- Most screws tighten when you turn them to the right.
- Some faucets, pens and water bottles hide a screw thread inside.
- A spiral slide at a playground has the same shape as a screw thread.
Common Misconceptions
Myth: A screw is just a nail with ridges.
Physics: A nail is pounded straight in. A screw is turned, and its winding ramp pulls it in a little each turn.
Myth: A screw makes work disappear.
Physics: A screw lets you push with less force. But your hand must turn around many times. The work stays about the same.
Key Facts
- A screw is a ramp wrapped around a post.
- The spiral ridge on a screw is called the thread.
- Each turn moves a screw forward a short way.
- A small twist becomes a strong push.
- Screws can hold things together or lift loads.
Quick Quiz: How Well Do You Know Screw for Kids?
5 questions. Tap an answer to check it.
What is a screw made of?
A screw is a ramp that winds around a post.
What is the spiral ridge on a screw called?
The winding ridge is called the thread.
Which of these uses a screw?
A jar lid has a thread that twists onto the jar.
Which simple machine is a screw most like?
A screw is a ramp, or inclined plane, wrapped around a post.
What is the trade when a screw makes your push smaller?
You push less, but you need many turns.
Frequently Asked Questions
What is a screw in simple words?
A screw is a post with a ramp wrapped around it. The ramp is called the thread. When you turn the screw, the thread pulls it forward. Each turn moves it only a little, but with a lot of force. That makes a screw a simple machine.
How is a screw an inclined plane?
An inclined plane is a ramp. If you wrap a long ramp around a post, its edge makes a spiral. That spiral is the thread of a screw. Moving along the thread is like walking up a gentle ramp that curls around.
What are 5 examples of a screw?
Five examples are a jar lid, bulb base, bottle cap, corkscrew and bolt. A car jack and a spinning piano stool also use screws. Each one has a thread that winds around in a spiral.
How does a screw make work easier?
A screw changes a small twist into a strong push. Your hand goes all the way around with each turn. The screw moves forward only a tiny bit. You push with less force, but you must turn the screw many times.
What is the difference between a screw and a nail?
You hammer a nail straight into wood. You twist a screw into wood. The screw's thread grips the wood all along its length. That is why screws hold better and can be taken out again without much damage.
Is a jar lid a screw?
Yes. Look inside a jar lid and you will see a spiral ridge. The jar neck has a matching ridge. When you twist the lid, the two threads slide along each other. A few turns pull the lid down tight.








