Circular motion

Centripetal Force

Centripetal force is the net force that pulls a moving object toward the center of its circular path, and its size equals mass times speed squared divided by the radius, F = mv²/r. It is not a separate kind of force: tension, gravity, friction or a push from a surface does the job. Without it, the object would carry on in a straight line.

Hammer thrower spinning with the ball on its wire in a wide circle, the wire tension providing the centripetal force
The tension in the wire pulls the hammer toward the thrower's hands, the center of its circle, until the moment of release.

At a Glance

Centripetal force is the net inward force needed for circular motion, F_c = m v^2 / r = m r ω^2, where m is mass in kg, v is speed in m/s, r is the radius in m and ω is angular velocity in rad/s. It always points toward the center and is supplied by real forces such as tension, gravity or friction.

Symbol
Fc
SI unit
newton (N), equal to 1 kg·m/s²
Formula
Fc = mv²/r = mrω²
Scalar or vector
Vector, always pointing toward the center
Supplied by
Tension, gravity, friction, normal force or a mix
On this page
  1. What Is Centripetal Force?
  2. Centripetal Force Explained Simply
  3. What Is the Formula for Centripetal Force?
  4. What Provides the Centripetal Force?
  5. What Keeps a Car on a Curve?
  6. How Does Centripetal Force Work in a Vertical Circle?
  7. What Happens If the Centripetal Force Disappears?
  8. Where Do You See Centripetal Force in Everyday Life?
  9. Who Discovered Centripetal Force, and How Can You Practice It?
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Is Centripetal Force?

Centripetal force is the name for the total inward force acting on anything that moves along a curve. A moving object left alone travels in a straight line at a steady speed. To bend its path into a circle, something must keep pulling or pushing it toward the center, and that inward net force is the centripetal force.

The word comes from Latin roots meaning "center seeking." It is a job description rather than a new type of force. When you swing a ball on a string, the tension is the centripetal force. For the Moon circling the Earth, gravity plays that role. For a car on a bend, friction between tires and road does the work.

Centripetal force is measured in newtons, like any force. Its direction is always toward the center of the circle, so it turns with the object as it goes around. Because it acts at a right angle to the motion, it changes the direction of the velocity without changing the speed.

Centripetal Force Explained Simply

Tie a soft toy to a piece of string and swing it around your head. You can feel your hand pulling inward the whole time. That pull is the centripetal force. Let go of the string and the toy does not fly straight outward; it shoots off along the direction it was moving at that moment, like a ball leaving a sling.

Things move in a circle only while something keeps tugging them toward the middle. The faster they go, the harder the tug must be. The tighter the circle, the harder the tug must be as well. Heavier objects need a bigger tug than light ones at the same speed and radius.

Teenager swinging a bucket of water in a vertical circle, the water staying in at the top because of centripetal force
Swung fast enough, the water stays in the bucket even upside down, because gravity and the bucket together only supply the inward force needed.
Top view of a toy whirled on a string, shown at four points with velocity along the tangent and centripetal force toward the center
At every point the string pulls toward the center with F_c = mv²/r = 3.6 N, at right angles to the velocity, so the toy turns without speeding up (computed).

What Is the Formula for Centripetal Force?

The size of the centripetal force is Fc=mv2r, where m is the mass in kilograms, v is the speed in meters per second and r is the radius of the circle in meters. With an angular velocity ω in rad/s, the same force is Fc=mrω2.

This is Newton's second law, F=ma, applied to circular motion. The acceleration is the centripetal acceleration v2/r, so the force is mass times that. Mass enters to the first power, speed is squared, and the radius sits underneath.

The squared speed is the part people forget. Taking the same curve twice as fast needs four times the inward force. For quick answers with unit conversions, try our centripetal force calculator.

Here is the formula in both of its forms, each symbol with its SI unit, and the rearrangements for mass, speed and radius.

Fc=mv2r=mrω2
What each symbol means
SymbolQuantitySI unit
Fcnet force toward the centernewton (N)
mmasskilogram (kg)
vspeedmeter per second (m/s)
rradiusmeter (m)
ωangular velocityradian per second (rad/s)

Rearranged to find another variable:

m=Fcrv2v=Fcrmr=mv2Fc

Valid for: uniform circular motion; F_c is the net inward force supplied by tension, gravity, friction, etc..

Example 1 Whirling a ball on a string

A 0.15 kg ball on a 0.80 m string is whirled in a horizontal circle at 5.0 m/s. How much centripetal force does the string have to provide?

  1. Given:
    • mass: m=0.15 kg
    • speed: v=5 m/s
    • radius: r=0.8 m
  2. Formula: Fc=mv2r=mrω2
  3. Substitute: m=0.15 kg,v=5 m/s,r=0.8 m
  4. Answer: Fc=4.688 N

The string tension supplies all of this inward force; this simple setup ignores the small effect of the ball's weight.

What Provides the Centripetal Force?

In every real case, one or more ordinary forces add up to the inward net force. Spotting which ones is the first step in any circular motion problem:

  • Tension in a string, rope or chain, as in a hammer throw, a swing ride or a ball on a string.
  • Gravity, which holds the Moon, satellites and planets on their orbits.
  • Static friction between tires and road on a flat curve, or between shoes and ground when a runner turns.
  • Normal force from a surface pressing inward, such as the wall of a spinning drum or the track of a loop.
  • A combination, such as gravity and a seat together at the top of a roller coaster loop.

The table shows a range of examples, the force that does the job in each and how large it has to be.

What supplies the centripetal force in real situations, and how large it is
SituationMass, radius and motionSupplied byCentripetal force
Ball whirled on a string0.15 kg, 0.8 m, 5 m/sString tension4.69 N
Rider on a playground spinner70 kg, 2 m, one turn per 4 sGrip of hands and seat friction345 N
Rider at the top of a coaster loop60 kg, 10 m, 12 m/sGravity (588 N) plus the seat (276 N)864 N
Car on a flat city curve1,200 kg, 50 m, 15 m/sStatic friction from the road5,400 N
Wet laundry in a spin cycle3 kg, 0.25 m, 1,200 rpmNormal force from the drum wall11,800 N
Space station in low orbit420,000 kg, 6.78 × 10⁶ m, 7,660 m/sEarth's gravity3.63 × 10⁶ N
The Moon orbiting Earth7.35 × 10²² kg, 3.844 × 10⁸ m, one orbit per 27.32 daysEarth's gravity2.0 × 10²⁰ N
Source: Computed with F = mv²/r and F = 4π²mr/T²; g = 9.806 65 m/s² (NIST CODATA 2022) · masses, radii and speeds are typical values · Retrieved October 2026

What Keeps a Car on a Curve?

On a flat road, the only sideways force on a turning car comes from static friction between the tires and the pavement. The tires grip the road and the road pushes the car toward the center of the bend. If the needed force mv2/r is more than friction can provide, the car slides outward along a wider path.

Wet or icy roads lower the maximum friction, so the safe speed drops. That is why warning signs ask drivers to slow down before sharp bends. Racetracks and highway ramps are often tilted so that part of the normal force also points inward; our page on banked curves shows how that raises the safe speed.

Example 2 Top safe speed on a flat curve

On a dry flat road, static friction can provide at most 6,000 N of sideways force on a 1,200 kg car. The curve has a radius of 40 m. What is the fastest speed the car can take the curve without sliding?

  1. Given:
    • net force toward the center: Fc=6,000 N
    • mass: m=1,200 kg
    • radius: r=40 m
  2. Formula: v=Fcrm
  3. Substitute: Fc=6,000 N,m=1,200 kg,r=40 m
  4. Answer: v=14.14 m/s (50.91 km/h, 31.64 mph)

Any faster and the car needs more inward force than the tires can give, so it drifts toward the outside of the bend.

How Does Centripetal Force Work in a Vertical Circle?

In a vertical circle, gravity is always pulling down, so it helps at some points and works against the needed inward force at others. At the bottom, the center of the circle is above the object. The upward force, such as string tension, must cancel the weight and still have enough left over to provide the inward net force.

The free-body diagram shows a 0.5 kg ball on a 0.6 m string passing the lowest point at 4 m/s. The needed net upward force is about 13.3 N (computed), so the tension must be about 18.2 N, much more than the ball's 4.9 N weight. This is why a swing feels heaviest at the bottom of its arc.

Over the top of a hill the situation flips. The center of the curve is below, so the net force must point down. Picture a 1,000 kg car crossing a crest of radius 40 m at 12 m/s: the road pushes up with only about 6,200 N while gravity pulls down with about 9,800 N (computed). The difference is the centripetal force, and passengers feel lighter. Our page on vertical circular motion covers loops in full.

Free-body diagram of a 0.5 kg ball at the bottom of a vertical circle: 18.24 N tension up and 4.90 N weight down
At the lowest point the tension must exceed the weight; the 13.3 N difference points up, toward the center of the circle.

What Happens If the Centripetal Force Disappears?

The moment the inward force vanishes, the object stops curving. By Newton's first law, it carries on in a straight line in whatever direction it was moving at that instant. That direction is along the tangent to the circle, not straight outward from the center.

You can see this with sparks flying off a grinding wheel or water drops leaving a spinning umbrella. Each one leaves along a straight line that just touches the circle at the point where it broke free. A hammer thrower uses the same idea, timing the release so that the tangent points down the field.

Where Do You See Centripetal Force in Everyday Life?

A washing machine uses centripetal force during its spin cycle. The drum wall pushes the clothes inward and keeps them circling, but water can pass through the holes in the wall. With nothing to hold it on the circle, the water flies off in straight lines and drains away. A salad spinner works the same way.

Cyclists and runners lean into turns so that the ground pushes them partly sideways. Laboratory centrifuges spin samples so fast that the needed inward force is thousands of times their weight, which separates heavier particles from lighter ones. Even standing still, you share the Earth's daily spin, and a tiny part of your weight goes into keeping you on that circle.

Example 3 Wet laundry in a spin cycle

A 3.0 kg bundle of wet laundry presses against the wall of a washing machine drum of radius 0.25 m. The drum turns at 125.7 rad/s. How large is the centripetal force from the drum wall?

  1. Given:
    • mass: m=3 kg
    • radius: r=0.25 m
    • angular velocity: ω=125.7 rad/s
  2. Formula: Fc=mv2r=mrω2
  3. Substitute: m=3 kg,r=0.25 m,ω=125.7 rad/s
  4. Answer: Fc=11,850 N

The drum wall pushes the clothes inward with this huge force, but water passes through the holes and keeps going in a straight line out of the drum.

Who Discovered Centripetal Force, and How Can You Practice It?

The rule that the needed force grows with the square of the speed and falls with the radius was worked out in the 1600s. Christiaan Huygens studied the pull on a whirled body and arrived at the v2/r relation. Isaac Newton coined the term centripetal force and used it in his Principia (1687) to show that one inward force, gravity, holds the Moon and the planets on their paths.

To build fluency, work through our circular motion worksheets and keep the rotational motion formula sheet nearby. If the outward feeling in a turning car still seems puzzling, read centripetal vs centrifugal force, and for the rotating-frame view see centrifugal force.

Common Misconceptions

Myth: Centripetal force is an extra force that you add to a free-body diagram.

Physics: Centripetal force is the net inward result of the real forces already there, such as tension or friction. Never draw it as a separate arrow alongside them.

Myth: When a string breaks, a whirled ball flies straight outward from the center.

Physics: The ball keeps the velocity it had at that instant, so it moves along the tangent to the circle, not along the radius.

Myth: An object moving in a circle at constant speed has no net force on it.

Physics: Its direction keeps changing, so it is accelerating toward the center, and by Newton's second law there must be a net inward force.

Myth: The outward push you feel in a turning car is the centripetal force.

Physics: The centripetal force on you points inward, from the seat and door. The outward feeling is your body's tendency to keep moving straight.

Key Facts

  • Centripetal force is the net inward force on an object moving in a circle, F = mv²/r.
  • It always points toward the center of the circle and is measured in newtons.
  • It is not a new kind of force: tension, gravity, friction or a normal force supplies it.
  • Doubling the speed on the same circle needs four times the centripetal force.
  • Centripetal force changes the direction of motion but never the speed.
  • If the centripetal force disappears, the object moves off along a straight tangent line.
  • Isaac Newton coined the term and used it to explain how gravity holds the Moon in orbit.
Did you know? During a 1,200 rpm spin cycle, the drum wall pushes on a 3 kg bundle of wet laundry with a force roughly 400 times the bundle's weight (computed).

Quick Quiz: How Well Do You Know Centripetal Force?

6 questions. Tap an answer to check it.

  1. What is the direction of the centripetal force on an object moving in a circle?

  2. What provides the centripetal force for a car taking a curve on a flat road?

  3. If the speed of a ball on a string triples while the radius stays the same, the needed tension becomes:

  4. A ball on a string is whirled in a circle and the string breaks. Which way does the ball go?

  5. What is the centripetal force on a 2 kg object moving at 3 m/s in a circle of radius 1 m?

  6. Why does a passenger feel lighter going over the crest of a hill in a car?

Frequently Asked Questions

What is centripetal force in simple words?

Centripetal force is the pull or push toward the middle that keeps something moving in a circle. Without it, a moving object would go in a straight line. It is not a special force of its own; a string, gravity, friction or a wall provides it. The faster the motion and the tighter the circle, the stronger it must be.

What is the formula for centripetal force?

Centripetal force is F = m v² / r, where m is the mass in kilograms, v is the speed in meters per second and r is the radius of the circle in meters. With angular velocity ω in radians per second, it can also be written F = m r ω². Both forms give the force in newtons, pointing toward the center.

Is centripetal force a real force?

Yes, in the sense that it is a real net force acting on the object, but it is not a new type of force. It is the name for whatever real forces add up to point toward the center, such as tension, gravity or friction. The outward centrifugal force, by contrast, appears only when you describe motion from a rotating point of view.

What are 5 examples of centripetal force?

Gravity holding the Moon in orbit around Earth, string tension on a ball swung in a circle, road friction on a car taking a curve, the drum wall pushing on clothes in a spin cycle, and the track pushing on a roller coaster car in a loop. In each case a real force points toward the center of the curved path.

What happens to centripetal force if speed doubles?

It becomes four times larger, because speed is squared in F = m v² / r. If the radius and mass stay the same, a car taking a bend at 60 km/h needs four times the sideways grip it needed at 30 km/h. That is why sharp turns at high speed are risky on slippery roads.

What is the difference between centripetal and centrifugal force?

Centripetal force is the real inward net force that bends a path into a circle. Centrifugal force is an apparent outward force that shows up only when you analyze the motion from inside the rotating object, such as a turning car. From the ground, only the inward force exists, and the outward feeling is inertia.

Does centripetal force do work?

In uniform circular motion it does no work. Work requires a force component along the direction of motion, and centripetal force always acts at a right angle to the velocity. That is why it changes the direction of an object but not its speed or kinetic energy. A satellite in a circular orbit keeps a constant speed for this reason.

What provides the centripetal force for a satellite?

Gravity does. The pull of Earth on the satellite points toward the center of the Earth, which is also the center of a circular orbit. At the right speed for its height, gravity provides exactly the inward force needed, so the satellite keeps falling around the Earth instead of falling into it.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.