
At a Glance
Beta decay is a radioactive process in which a nucleus emits a beta particle: an electron in beta-minus decay (n → p + e⁻ + antineutrino) or a positron in beta-plus decay (p → n + e⁺ + neutrino). The mass number A stays the same and the atomic number Z changes by one, and the energy released is Q = (m_initial − m_final) c^2.
- Particle emitted
- Electron (β⁻) or positron (β⁺), plus a neutrino or antineutrino
- Change in nucleus
- A stays the same; Z rises by 1 (β⁻) or falls by 1 (β⁺)
- Energy released
- Q = (minitial − mfinal)c²
- Force responsible
- The weak nuclear force
- Stopped by
- A few millimeters of aluminum or a sheet of plastic
- Theory
- Neutrino idea by Wolfgang Pauli, 1930; theory by Enrico Fermi, 1934
On this page
- What Is Beta Decay?
- Beta Decay Explained Simply
- What Are the Types of Beta Decay?
- How Do You Write a Beta Decay Equation?
- Where Does the Energy of Beta Decay Come From?
- Why Did Beta Decay Lead to the Neutrino?
- What Causes Beta Decay?
- How Penetrating Is Beta Radiation?
- What Are Examples of Beta Decay?
- Is Beta Radiation Dangerous?
- How Can You Practice Beta Decay Problems?
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is Beta Decay?
Beta decay is one of the three classic kinds of radioactive decay, alongside alpha and gamma. In beta decay a nucleus with an unbalanced mix of protons and neutrons fixes the balance by converting one nucleon into the other. To keep electric charge and other quantities balanced, it emits a fast, light charged particle and an almost massless neutral one.
The charged particle is called a beta particle. It is either an ordinary electron or its antimatter twin, the positron. It is created at the moment of decay; it was never sitting inside the nucleus beforehand.
Because the number of protons changes, beta decay turns one element into another. Carbon-14 becomes nitrogen-14, tritium becomes helium-3 and iodine-131 becomes xenon-131.
Beta Decay Explained Simply
Imagine a nucleus as a team that works best with a certain ratio of two kinds of players. If it has too many neutrons, one neutron can switch sides and become a proton. If it has too many protons, a proton can switch and become a neutron.
Each switch changes the electric charge, so the nucleus has to throw out a tiny charged particle to keep the books balanced. It also throws out a ghostly particle called a neutrino that hardly touches anything.
The total number of players stays the same. Only the team's name changes, because the number of protons is what decides which element an atom is.
What Are the Types of Beta Decay?
There are two forms of beta decay, plus a closely related process:
- Beta-minus (β⁻) decay happens in nuclei with too many neutrons. A neutron becomes a proton and the nucleus emits an electron and an electron antineutrino:
. The atomic number goes up by one. - Beta-plus (β⁺) decay, also called positron emission, happens in nuclei with too many protons. A proton becomes a neutron and the nucleus emits a positron and an electron neutrino:
. The atomic number goes down by one. - Electron capture reaches the same result as beta-plus decay by a different route. The nucleus absorbs one of the atom's own inner electrons, a proton becomes a neutron, and only a neutrino leaves.
A free proton cannot undergo beta-plus decay because it is lighter than a neutron. Inside a nucleus it can, as long as the whole nucleus ends up with less mass, since the energy then comes from the nucleus as a whole.
How Do You Write a Beta Decay Equation?
A nuclear equation tracks two totals that must match on both sides: the mass numbers along the top and the charges along the bottom. In beta-minus decay the electron is written with mass number 0 and charge −1, and in beta-plus decay the positron has mass number 0 and charge +1. Neutrinos carry neither.
Here is carbon-14 decaying by beta-minus emission:
The top numbers give 14 = 14 + 0, and the bottom numbers give 6 = 7 − 1. A beta-plus example is sodium-22 becoming neon-22, where 11 = 10 + 1 along the bottom. For more practice balancing these, see our guide to nuclear equations.
Where Does the Energy of Beta Decay Come From?
A nucleus can only decay if the products have less total mass than the starting nucleus. The missing mass becomes energy through mass-energy equivalence, and that energy is called the Q value. For beta decays, Q ranges from a few thousandths of an MeV up to several MeV.
The energy is shared among three products: the beta particle, the neutrino and the slightly recoiling daughter nucleus. Because the split changes from one decay to the next, beta particles do not all come out with the same energy. Their energies form a smooth spread from nearly zero up to Q, and the average electron carries only about a third of the maximum.
When you work with atomic masses from tables instead of nuclear masses, the electron masses cancel neatly for beta-minus decay. For beta-plus decay, the parent atom must outweigh the daughter atom by at least two electron masses, an energy of 1.022 MeV.
The energy shared among the beta particle, the neutrino and the recoiling nucleus is the Q value, set by the mass that disappears in the decay.
| Symbol | Quantity | SI unit |
|---|---|---|
| energy released (Q > 0 exothermic) | joule (J) | |
| total rest mass before the reaction | kilogram (kg) | |
| total rest mass after the reaction | kilogram (kg) | |
| speed of light in vacuum (2.998 × 10⁸ m/s (exact: 299 792 458 m/s)) | meter per second (m/s) |
Valid for: Q > 0: energy released (fission, fusion, decay); Q < 0: energy must be supplied.
Example 1 Energy released when a free neutron decays
A free neutron (mass 1.674 927 500 56 × 10^-27 kg) decays into a proton and an electron, whose combined mass is 1.673 532 864 32 × 10^-27 kg. The antineutrino's mass is negligible. What is the Q value in MeV?
- Given:
- total rest mass before the reaction:
- total rest mass after the reaction:
- speed of light in vacuum:
- total rest mass before the reaction:
- Formula:
- Substitute:
- Answer:
This energy is the upper limit for the electron's kinetic energy; in most decays the antineutrino carries off a good share of it.
Why Did Beta Decay Lead to the Neutrino?
Early measurements in the 1910s and 1920s puzzled physicists. If a nucleus simply emitted an electron, the electron should always carry the same energy, just as the two fragments of an exploding object share energy in a fixed way. Instead the electrons came out with a whole range of energies, and some energy seemed to vanish.
In 1930 Wolfgang Pauli suggested a way out: an unseen neutral particle was carrying away the missing energy and momentum. In 1934 Enrico Fermi built a full theory of beta decay around it and named it the neutrino, Italian for little neutral one. The particle is so hard to catch that it was not detected until the Cowan-Reines experiment of 1956 near a nuclear reactor. You can read more on our neutrino page.
What Causes Beta Decay?
Beta decay is driven by the weak nuclear force, the only force that can change one type of quark into another. A neutron contains one up quark and two down quarks. In beta-minus decay one down quark turns into an up quark, which changes the neutron into a proton.
The change happens through a very heavy, short-lived carrier particle, the W boson. The W⁻ exists for far too short a time to be seen directly, and it quickly turns into the electron and the antineutrino. Because the W is so heavy, the weak force has an extremely short range, which is one reason many beta decays are slow, with half-lives from fractions of a second to billions of years.
The weak force also behaves differently in a mirror. The Wu experiment of 1956 showed that electrons from aligned cobalt-60 nuclei leave preferentially in one direction, proving that beta decay does not look the same as its mirror image.
How Penetrating Is Beta Radiation?
Beta particles are much lighter than alpha particles and carry only a single charge, so they ionize atoms less often and travel farther. A typical beta particle can cross tens of centimeters to a few meters of air, but a few millimeters of aluminum or a thick sheet of plastic stops it. Lead is not the best first layer, because fast electrons braking in heavy metal give off X-rays; light materials work better.
Beta particles also bend in electric and magnetic fields. Being negative, an electron from beta-minus decay is pulled toward a positive plate, while a positron bends the other way. Because beta particles are so light, they curve much more sharply than alpha particles of similar energy. The side-by-side page alpha vs beta vs gamma radiation compares all three in detail.


What Are Examples of Beta Decay?
Beta emitters are common in nature, in medicine and in industry. The table lists several with their decay type and typical half-life. Carbon-14 forms in the upper atmosphere and decays slowly, which makes radiometric dating of once-living material possible. Potassium-40 in rocks and in our bodies decays mostly by beta-minus emission and is a major source of natural radiation inside us.
In hospitals, iodine-131 is a beta-minus emitter used to treat overactive thyroid glands and some thyroid cancers, and fluorine-18 is a beta-plus emitter used in PET scans, where the positrons annihilate as described on our antimatter page. Tritium, a beta emitter with low energy, lights some exit signs and watch dials without any power supply.
The two worked examples below use half-life to track how a beta source fades. Our half-life calculator handles any isotope, and the decay curve shows how iodine-131 halves roughly every eight days.
Example 2 How much phosphorus-32 is left after a month?
A lab receives a phosphorus-32 source with an activity of 400 MBq. This beta-minus emitter has a half-life of about 14.3 days. What is its activity after 30 days?
- Given:
- initial number of nuclei:
- elapsed time:
- half-life:
- initial number of nuclei:
- Formula:
- Substitute:
- Answer:
A little over two half-lives have passed, so slightly less than a quarter of the starting activity remains.
Example 3 Dating charcoal with carbon-14
Carbon-14 decays by beta-minus emission with a half-life of 5,730 years. A charcoal sample has 25 percent of the carbon-14 found in living wood. About how old is it?
- Given:
- initial number of nuclei:
- number of undecayed nuclei remaining:
- half-life:
- initial number of nuclei:
- Formula:
- Substitute:
- Answer:
Falling to one quarter means exactly two half-lives, which is how radiocarbon dating turns a beta-decay rate into an age.
| Isotope | Decay type | Daughter | Approximate half-life | Where it matters |
|---|---|---|---|---|
| Hydrogen-3 (tritium) | β⁻ | Helium-3 | About 12.3 years | Self-powered glowing signs, fusion fuel |
| Carbon-14 | β⁻ | Nitrogen-14 | 5,730 years | Radiocarbon dating |
| Phosphorus-32 | β⁻ | Sulfur-32 | About 14.3 days | Biology labs, some cancer treatments |
| Iodine-131 | β⁻ | Xenon-131 | About 8.02 days | Thyroid treatment |
| Strontium-90 | β⁻ | Yttrium-90 | About 28.8 years | Fission product, industrial gauges |
| Cobalt-60 | β⁻ then γ | Nickel-60 | About 5.27 years | Radiotherapy, sterilizing equipment |
| Fluorine-18 | β⁺ | Oxygen-18 | About 110 minutes | PET scans |
| Sodium-22 | β⁺ | Neon-22 | About 2.6 years | Positron sources in labs |
| Potassium-40 | Mostly β⁻, sometimes β⁺ or electron capture | Calcium-40 or argon-40 | About 1.25 billion years | Natural radiation in rocks and the body |
| Source: Daughter nuclei from A = Z + N bookkeeping (Z changes by one, A unchanged); half-lives are typical published values, rounded · Retrieved October 2026 | ||||

Is Beta Radiation Dangerous?
Outside the body, beta radiation is a moderate hazard. It cannot pass through thick clothing or a layer of plastic, but strong sources can burn the skin and harm the eyes, so labs handle them with shielding and tongs. Beta radiation is a form of ionizing radiation, so dose limits apply.
Inside the body the risk is greater, because nothing stands between the source and living cells. That is why swallowed or inhaled beta emitters such as strontium-90 are a concern after nuclear accidents. The same short reach becomes useful in medicine, where beta emitters deliver a dose to a tumor while sparing tissue a centimeter or so away.
How Can You Practice Beta Decay Problems?
Beta decay questions usually ask you to balance a nuclear equation, find the daughter nucleus or work out how much of a sample remains. Try the worked examples above with other isotopes from the table, then compare with alpha decay and gamma decay. For printable practice with answer keys, use the radioactivity worksheets and half-life worksheets, and keep the nuclear physics formulas sheet nearby.
Common Misconceptions
Myth: The electron in beta decay was sitting inside the nucleus all along.
Physics: Nuclei contain no electrons. The beta particle is created at the instant of decay, when a neutron turns into a proton.
Myth: Beta decay changes the mass number of a nucleus.
Physics: The total number of nucleons stays the same. Only the balance between protons and neutrons shifts, so Z changes by one while A is unchanged.
Myth: Every beta particle from a given isotope has the same energy.
Physics: The energy is split three ways, so beta particles come out with a continuous range of energies up to the Q value.
Myth: Thick lead is always the best shield against beta radiation.
Physics: Light materials such as aluminum or plastic are better first layers, because fast electrons stopping in heavy metal produce X-rays.
Key Facts
- Beta decay changes a neutron into a proton (beta-minus) or a proton into a neutron (beta-plus) inside a nucleus.
- Beta-minus decay emits an electron and an antineutrino; beta-plus decay emits a positron and a neutrino.
- The mass number stays the same in beta decay, while the atomic number changes by one.
- The energy released, the Q value, equals the mass lost multiplied by c², and it is shared among the products, so beta energies form a continuous spread.
- The missing energy in early beta decay measurements led Wolfgang Pauli to propose the neutrino in 1930.
- Beta decay is caused by the weak nuclear force, which turns a down quark into an up quark or the reverse.
- Beta particles are stopped by a few millimeters of aluminum or a thick sheet of plastic.
Quick Quiz: How Well Do You Know Beta Decay (Beta Radiation)?
6 questions. Tap an answer to check it.
In beta-minus decay, what happens inside the nucleus?
A neutron turns into a proton, emitting an electron and an antineutrino.
How does the mass number change in beta decay?
One nucleon changes type, so the total number of nucleons is unchanged.
Carbon-14 (Z = 6) undergoes beta-minus decay. What is the daughter nucleus?
Z rises from 6 to 7, which is nitrogen, and A stays 14.
Which particle is emitted in beta-plus decay?
Beta-plus decay emits a positron, the antiparticle of the electron, plus a neutrino.
Which force is responsible for beta decay?
Only the weak force can change one quark flavor into another.
Why do beta particles have a range of energies rather than one fixed energy?
The Q value is split among the beta particle, the neutrino and the recoiling nucleus.
Frequently Asked Questions
What is beta decay in simple terms?
Beta decay is a way for an unstable nucleus to become more stable. A neutron turns into a proton, or a proton turns into a neutron, and the nucleus throws out a fast electron or positron plus a tiny neutral particle called a neutrino. The number of nucleons stays the same, but the element changes because the proton count changes.
What is a beta particle?
A beta particle is a high-speed electron or positron emitted by a nucleus during beta decay. In beta-minus decay it is an electron with a charge of −1. In beta-plus decay it is a positron with a charge of +1. Both have the same tiny mass, about 1/1,836 of a proton, which is why beta particles are fast and fairly penetrating.
What is the difference between beta minus and beta plus decay?
In beta-minus decay a neutron becomes a proton and the nucleus emits an electron and an antineutrino, so the atomic number rises by one. In beta-plus decay a proton becomes a neutron and the nucleus emits a positron and a neutrino, so the atomic number falls by one. Neutron-rich nuclei undergo beta-minus decay, and proton-rich nuclei undergo beta-plus decay.
What stops beta radiation?
Beta particles are stopped by a few millimeters of aluminum, a thick sheet of plastic or a layer of glass. They can pass through paper and skin's outer layer and travel tens of centimeters to a few meters in air. Shields for strong beta sources usually use plastic or aluminum first, because stopping fast electrons in lead creates secondary X-rays.
Does beta decay change the element?
Yes. The atomic number, which is the number of protons, changes by one in every beta decay, and the atomic number is what defines an element. Carbon-14 becomes nitrogen-14 after beta-minus decay, and fluorine-18 becomes oxygen-18 after beta-plus decay. The mass number stays the same, so the parent and daughter are called isobars.
Why is there a neutrino in beta decay?
Without a neutrino, energy and momentum would not balance. Measurements showed that beta electrons come out with a spread of energies, so some energy had to be carried away by something unseen. Wolfgang Pauli proposed a neutral, nearly massless particle in 1930, Enrico Fermi built a theory around it in 1934, and it was finally detected in 1956.
Is beta radiation more dangerous than alpha radiation?
It depends on where the source is. Outside the body, beta is more dangerous than alpha because alpha particles cannot get through dead skin, while beta can reach living tissue near the surface. Inside the body, alpha emitters are usually more harmful because they deposit their energy in a very short distance. Gamma rays penetrate the most of all three.
What force causes beta decay?
Beta decay is caused by the weak nuclear force. It is the only interaction that can change the flavor of a quark, for example turning a down quark into an up quark. That change converts a neutron into a proton. The process runs through a heavy W boson, which immediately becomes an electron and an antineutrino, or a positron and a neutrino.








