
At a Glance
Radioactive decay is the random breakdown of unstable nuclei, which emit alpha particles, beta particles or gamma rays. The number left follows N = N0 e^(−λt), where λ is the decay constant, and the activity is A = λN decays per second, measured in becquerels. The half-life, the time for half the nuclei to decay, equals ln 2 / λ.
- Decay law
- N = N0e−λt
- Activity
- A = λN, in becquerels (Bq)
- Decay constant λ
- Probability of decay per second, unit s−1
- Half-life
- t½ = ln 2 / λ ≈ 0.693 / λ
- Main modes
- Alpha, beta minus, beta plus, electron capture, gamma
- Affected by
- Essentially nothing: not heat, pressure or chemistry
On this page
- What Is Radioactive Decay?
- Radioactive Decay Explained Simply
- Why Are Some Nuclei Unstable?
- What Are the Types of Radioactive Decay?
- How Do You Write a Decay Equation?
- What Is the Radioactive Decay Law?
- How Is Half-Life Related to the Decay Constant?
- What Is Activity and How Is It Measured?
- What Is a Decay Chain?
- How Is Radioactive Decay Used?
- Who Discovered Radioactive Decay?
- Practice Radioactive Decay Problems
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is Radioactive Decay?
Most atomic nuclei are stable and will stay the same forever. Some, though, have an awkward mix of protons and neutrons or simply too much energy. These unstable nuclei eventually rearrange themselves into a more stable form, and they give off the extra energy as radiation. That event is radioactive decay.
The nucleus that decays is called the parent, and the nucleus left behind is the daughter. In alpha and beta decay the daughter belongs to a different element, because its proton count has changed. In gamma decay the nucleus stays the same element and only sheds energy.
Decay happens on its own, with no trigger. Heating a sample, crushing it, dissolving it in acid or locking it into a chemical compound makes essentially no difference to how fast it decays. The process belongs to the nucleus, far below the reach of chemistry.
Radioactive Decay Explained Simply
Imagine a huge bowl of popcorn kernels in a hot pan. You cannot say which kernel will pop next, but you can say fairly well how many will pop in the next minute. Unstable nuclei are like kernels that pop at random, except the chance never changes over time.
When a nucleus pops, it throws out a tiny bit of matter or a flash of energy and becomes a calmer nucleus. Start with a million unstable nuclei and wait one half-life: about half a million are left. Wait another half-life and about a quarter of a million remain. The pile keeps shrinking by half, but in principle it never quite reaches zero.
Why Are Some Nuclei Unstable?
Inside a nucleus, the strong nuclear force pulls nucleons together while the electric force pushes protons apart. Only certain combinations of protons and neutrons strike a lasting balance. Plotted on a chart, the stable nuclei form a narrow band, and our page on nuclear stability maps it out.
A nucleus off that band decays toward it. One with too many neutrons tends to turn a neutron into a proton. One with too many protons does the reverse. A very heavy nucleus, with more than 82 protons, often throws off a whole alpha particle to shed mass and charge at once. Every decay moves the nucleus to a state with less total energy.
What Are the Types of Radioactive Decay?
Each type of decay changes the nucleus in a characteristic way, summarized in the table below:
- Alpha decay: the nucleus emits a helium-4 nucleus. The atomic number drops by 2 and the mass number by 4.
- Beta-minus decay: a neutron becomes a proton, releasing an electron and an antineutrino. The atomic number rises by 1.
- Beta-plus decay: a proton becomes a neutron, releasing a positron and a neutrino. The atomic number falls by 1.
- Electron capture: the nucleus swallows one of its own inner electrons, turning a proton into a neutron.
- Gamma decay: an excited nucleus drops to a lower energy state by emitting a gamma-ray photon. Neither number changes.
A few very heavy nuclei can also split in two on their own, called spontaneous fission. To see how the three main kinds of radiation differ in penetration and charge, read alpha vs beta vs gamma radiation.
| Mode | Particle emitted | Change in Z | Change in A | Example |
|---|---|---|---|---|
| Alpha | Helium-4 nucleus | −2 | −4 | Uranium-238 → thorium-234 |
| Beta minus | Electron + antineutrino | +1 | 0 | Carbon-14 → nitrogen-14 |
| Beta plus | Positron + neutrino | −1 | 0 | Fluorine-18 → oxygen-18 |
| Electron capture | Neutrino (inner electron absorbed) | −1 | 0 | Potassium-40 → argon-40 |
| Gamma | Gamma-ray photon | 0 | 0 | Technetium-99m → technetium-99 |
| Spontaneous fission | Two large fragments + neutrons | Splits | Splits | Californium-252 |
| Source: Changes in Z and A follow from conservation of charge and nucleon number · Retrieved October 2026 | ||||
How Do You Write a Decay Equation?
A nuclear decay equation must balance two totals: the mass numbers on top and the atomic numbers on the bottom. For the alpha decay of uranium-238,
For the beta-minus decay of carbon-14,
What Is the Radioactive Decay Law?
Every unstable nucleus of a given isotope has the same fixed chance of decaying in each second. That chance is the decay constant,
That rule leads to exponential decay:
The law describes large numbers of nuclei. For a handful of atoms, the actual count jumps around the smooth curve, much like the scatter you get flipping a few coins. Our half-life simulation with coins or dice lets you see that randomness for yourself.
The decay law gives the number of undecayed nuclei at any time from the starting number and the decay constant.
| Symbol | Quantity | SI unit |
|---|---|---|
| number of undecayed nuclei | dimensionless (1) | |
| initial number of nuclei | dimensionless (1) | |
| decay constant | per second (1/s) | |
| elapsed time | second (s) |
Rearranged to find another variable:
Valid for: λ and t in reciprocal units.
Example 1 Nuclei left in a medical tracer sample
A tracer sample starts with 8.0 × 10^9 radioactive nuclei. The isotope has a decay constant of 0.12 per day. How many undecayed nuclei remain after 10 days?
- Given:
- initial number of nuclei:
- decay constant:
- elapsed time:
- initial number of nuclei:
- Formula:
- Substitute:
- Answer:
As long as λ and t use the same time unit, here days, the product λt has no unit and the law works directly.

How Is Half-Life Related to the Decay Constant?
The half-life is the time for half of any sample to decay. Setting
A second measure, the mean life
| Half-lives elapsed | Mean lives elapsed | Fraction remaining | Percent remaining |
|---|---|---|---|
| 1 | 0.693 | 1/2 | 50% |
| 2 | 1.386 | 1/4 | 25% |
| 3 | 2.079 | 1/8 | 12.5% |
| 4 | 2.773 | 1/16 | 6.25% |
| 5 | 3.466 | 1/32 | 3.125% |
| 10 | 6.931 | 1/1,024 | 0.098% |
| Source: Computed with N/N₀ = (½)^n and t/τ = n ln 2 · Retrieved October 2026 | |||
What Is Activity and How Is It Measured?
The activity of a sample is the number of decays per second,
Because activity is proportional to the number of nuclei left, it falls with the same exponential curve:
Example 2 The activity of a laboratory source
A small source holds 3.0 × 10^12 radioactive nuclei with a decay constant of 2.1 × 10^-6 per second. What is its activity?
- Given:
- decay constant:
- number of radioactive nuclei:
- decay constant:
- Formula:
- Substitute:
- Answer:
Millions of decays every second sounds like a lot, yet this is a weak source; activity scales with how many nuclei you have.
Example 3 A fast-decaying radon isotope
A sample of radon-220 has an initial activity of 4,000 Bq. Its decay constant is 0.0125 per second. What is its activity after 120 seconds?
- Given:
- initial activity:
- decay constant:
- elapsed time:
- initial activity:
- Formula:
- Substitute:
- Answer:
Two minutes is a little over two half-lives for this isotope, so the activity has dropped to roughly a fifth of where it started.

What Is a Decay Chain?
Often the daughter nucleus is itself unstable, so it decays again, and so on, until a stable nucleus is reached. This sequence is a decay chain. Uranium-238, with a half-life of about 4.5 billion years, passes through radium, radon and polonium on its way to stable lead-206.
You can check the chain with simple bookkeeping. Going from mass number 238 to 206 means losing 32, which takes exactly 8 alpha decays. Those would drop the atomic number from 92 to 76, but lead has 82, so 6 beta-minus decays must add the missing protons. Radon from this chain seeps out of rocks and is the largest natural source of background radiation for most people.
How Is Radioactive Decay Used?
The steady clock of decay is used to date rocks, fossils and ancient artifacts; see radiometric dating. Doctors inject short-lived isotopes as tracers that show how organs work, then rely on fast decay to clear them from the body. Smoke alarms use a tiny alpha source to detect smoke particles.
The heat released by decay is useful too. Space probes far from the Sun run on generators warmed by plutonium-238, and decay heat inside Earth helps keep the planet's interior hot. Inside a reactor, decay heat keeps fuel warm even after the chain reaction stops, which is why cooling must continue.

Who Discovered Radioactive Decay?
Henri Becquerel found in 1896 that uranium gives off rays on its own. Marie Curie showed the effect was a property of atoms and named it radioactivity. Around 1902, Ernest Rutherford and Frederick Soddy showed that radioactive atoms actually change into other elements and that the activity falls off exponentially, the foundation of the decay law used today.
Practice Radioactive Decay Problems
Our half-life worksheets and radioactivity worksheets provide printable problems with answer keys. The nuclear physics formulas sheet gathers every equation on this page, and the quiz below checks the key ideas.
Common Misconceptions
Myth: After two half-lives, a sample has completely decayed.
Physics: Each half-life removes half of what is left, so after two half-lives a quarter of the sample remains. The amount shrinks steadily but never drops to exactly zero in theory.
Myth: Heating or cooling a radioactive material changes how fast it decays.
Physics: Decay depends on the nucleus, not on temperature or chemistry. Ordinary conditions have essentially no effect on the rate.
Myth: An old nucleus is more likely to decay soon than a fresh one.
Physics: Nuclei do not age. Every undecayed nucleus of an isotope has the same chance of decaying in the next second, however long it has existed.
Myth: Radioactive decay always turns one element into another.
Physics: Gamma decay only releases energy; the number of protons and neutrons stays the same, so the element does not change.
Key Facts
- Radioactive decay is the spontaneous change of an unstable nucleus, which releases energy as radiation.
- The main modes are alpha, beta minus, beta plus, electron capture and gamma decay.
- Decay is random for a single nucleus but follows N = N₀e^(−λt) for a large sample.
- Activity A = λN is the number of decays per second, measured in becquerels.
- Half-life equals ln 2 divided by the decay constant, about 0.693/λ.
- Temperature, pressure and chemical bonding have essentially no effect on decay rates.
- Uranium-238 reaches stable lead-206 through a chain of 8 alpha and 6 beta-minus decays.
Quick Quiz: How Well Do You Know Radioactive Decay?
6 questions. Tap an answer to check it.
In alpha decay, how do the atomic number and mass number change?
An alpha particle carries away 2 protons and 2 neutrons.
A sample has 1,000 nuclei. About how many remain after three half-lives?
1,000 × (½)³ = 125.
What is the SI unit of activity?
One becquerel equals one decay per second.
Which type of decay leaves the element unchanged?
Gamma decay only releases energy from an excited nucleus.
How are half-life and decay constant related?
Setting N = N₀/2 in the decay law gives t½ = ln 2 / λ.
What happens to the decay rate of a sample if you heat it strongly?
Decay is a nuclear process that ordinary heat does not affect.
Frequently Asked Questions
What is radioactive decay in simple terms?
Radioactive decay is what happens when the center of an unstable atom breaks down on its own. It gives off a small particle or a burst of energy and usually becomes a different element. You cannot predict when any one atom will do this, but in a large sample a steady fraction decays in each second, which makes decay a reliable clock.
What are the 3 main types of radioactive decay?
The three main types are alpha, beta and gamma decay. Alpha decay ejects a helium nucleus of two protons and two neutrons. Beta decay changes a neutron into a proton or the reverse and emits an electron or a positron. Gamma decay releases a high-energy photon from an excited nucleus without changing the element.
What is the formula for radioactive decay?
The decay law is N = N₀e^(−λt). Here N is the number of undecayed nuclei at time t, N₀ is the starting number and λ is the decay constant, the chance per second that one nucleus decays. An equivalent half-life form is N = N₀(½)^(t/t½). The activity follows the same pattern: A = A₀e^(−λt).
Is radioactive decay random?
Yes. For a single nucleus, decay is truly random: quantum physics gives only a probability, not a schedule. For a large number of nuclei, though, the randomness averages out and the total follows a smooth exponential curve very precisely. That is why half-lives can be measured to high accuracy even though individual decays are unpredictable.
Can anything speed up or slow down radioactive decay?
Under everyday conditions, no. Heat, cold, pressure, electric fields and chemical reactions leave decay rates essentially unchanged, because the nucleus is shielded by the surrounding electrons and its energies are far larger than chemical ones. Tiny changes are seen only in special cases, such as electron capture in atoms stripped of all their electrons.
What is the difference between half-life and decay constant?
The decay constant λ is the probability per second that one nucleus decays. The half-life is the time needed for half of a sample to decay. They carry the same information and are linked by t½ = ln 2 / λ, about 0.693 divided by λ. A large decay constant means a short half-life, and a small one means a long half-life.
What does a radioactive nucleus turn into?
It turns into a daughter nucleus. In alpha decay the daughter has two fewer protons and two fewer neutrons. In beta-minus decay it has one more proton and one fewer neutron. In beta-plus decay or electron capture it has one fewer proton. If the daughter is still unstable, it decays again, forming a decay chain.
Why is radioactive decay important?
Radioactive decay lets scientists date rocks, fossils and artifacts, gives doctors tracers for scanning and beams for treating cancer, powers deep-space probes and helps keep Earth's interior hot. It also explains natural background radiation and is the reason nuclear waste must be stored safely until its activity has fallen to safe levels.








