The rungs of the atomic ladder

Electron Energy Levels

Electron energy levels are the specific, separate energies that an electron bound to an atom is allowed to have. An electron can sit on one level or jump to another, but it can never hold an energy in between. Each jump absorbs or releases a photon whose energy equals the gap, which is why every element shines and absorbs light at its own set of colors.

Glowing horizontal shelves stacked closer toward the top with a small sphere on one, a visual metaphor for electron energy levels
Electrons in an atom can only sit on certain energy shelves, and the shelves crowd together near the top.

At a Glance

Electron energy levels are the discrete energies an electron may have inside an atom. For hydrogen they follow E_n = -13.6 eV / n^2, where n = 1, 2, 3 and so on, and an electron moving between two levels emits or absorbs a photon with energy equal to the difference.

Symbol
En (energy of level n)
Units
joule (J); usually electronvolts (eV)
Hydrogen formula
En = −13.6 eV × Z²/n²
Label
Principal quantum number n = 1, 2, 3, …
Sign
Negative: the electron is bound
First proposed
Niels Bohr, 1913
On this page
  1. What Are Electron Energy Levels?
  2. Energy Levels Explained Simply
  3. Why Do Electrons Have Fixed Energy Levels?
  4. What Is the Formula for Hydrogen's Energy Levels?
  5. How Do You Read an Energy Level Diagram?
  6. How Do Electrons Move Between Energy Levels?
  7. How Do Energy Levels Create Spectral Lines?
  8. Do Other Atoms Have the Same Energy Levels as Hydrogen?
  9. Where Do You See Energy Levels in Everyday Life?
  10. Practice Energy Level Problems
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Are Electron Energy Levels?

An electron inside an atom is held near the nucleus by electric attraction. In a world run by classical physics, it could orbit at any distance with any energy. Real atoms do not work that way. Measurements show that a bound electron can only have certain fixed energies, and these allowed values are called energy levels.

Each level is labeled by the principal quantum number n, a whole number starting at 1. The level with n = 1 is the lowest and most tightly bound, known as the ground state. Levels with n = 2, 3 and higher are excited states. Far above them is the ionization limit, where the electron is no longer bound and leaves the atom.

Because the levels are separate, an electron changes energy only in jumps. Those jumps are the source of atomic spectra, lasers, neon signs and the colors you see in fireworks.

Energy Levels Explained Simply

Picture a bookcase with shelves at fixed heights. You can set a book on the first shelf or the third shelf, but not halfway between, because there is nothing there to hold it. Electrons in an atom have the same kind of shelves, except the shelves are energies instead of heights.

To lift an electron to a higher shelf, the atom must take in exactly the right amount of energy, often from a particle of light. When the electron drops back down, it hands that energy back out as light. Since every element has its own set of shelves, every element gives off its own pattern of colors, like a fingerprint made of light.

The shelves are also not evenly spaced. They get closer and closer together as you go up, until the top ones almost touch.

Why Do Electrons Have Fixed Energy Levels?

The short answer is that electrons behave like waves. A wave trapped in a limited space can only form certain stable patterns, the same way a guitar string pinned at both ends only rings at certain notes. For an electron held by a nucleus, each stable wave pattern has its own energy, and only those energies are allowed. The simplest example of this idea is the particle in a box.

Niels Bohr captured the result in 1913 by assuming that electrons move only in certain allowed orbits and radiate only when jumping between them. His Bohr model predicted hydrogen's energies very accurately. Later, the Schrödinger equation explained why: the levels are the energies of the standing-wave solutions for an electron bound to a nucleus. This broader idea is called the quantization of energy.

Standing wave pinned at both ends with two half-waves, showing why a confined electron wave allows only certain energies
A confined wave can only form whole-number patterns, and each pattern corresponds to one allowed energy.

What Is the Formula for Hydrogen's Energy Levels?

For hydrogen and any ion with only one electron, the levels follow En=−Z2n2(13.6 eV). Here Z is the number of protons in the nucleus (1 for hydrogen) and n is the principal quantum number. The energies are quoted in electronvolts, a unit equal to 1.602 176 634 × 10⁻¹⁹ J; see our electronvolt page for conversions.

The minus sign matters. Energy is measured from a free electron at rest, which is set to zero. A bound electron has less energy than that, so its energy is negative, and the deeper the level, the more negative the value. The ground state of hydrogen sits at about −13.6 eV, which is why it takes 13.6 eV to pull hydrogen's electron away completely.

The 1/n² pattern also explains the crowding at the top. Going from n = 1 to n = 2 changes the energy by about 10.2 eV, but going from n = 5 to n = 6 changes it by only a sixth of an electronvolt.

Here is the energy-level formula for hydrogen and hydrogen-like ions, with each symbol and its unit. The 13.6 eV in it is the Rydberg energy, 13.605 693 122 990 eV in NIST CODATA 2022.

En=−Z2n2(13.6 eV)
What each symbol means
SymbolQuantitySI unit
Enenergy of level njoule (J)
Zatomic number (1 for hydrogen)dimensionless (1)
nprincipal quantum number (1, 2, 3, ...)dimensionless (1)

Rearranged to find another variable:

n=Z13.6 eV|En|

Valid for: hydrogen and hydrogen-like ions (one electron); 13.6 eV = 2.18 × 10⁻¹⁸ J.

Example 1 The fourth level of hydrogen

Using a Rydberg energy of 13.605 693 122 990 eV, find the energy of an electron in the n = 4 level of a hydrogen atom (Z = 1).

  1. Given:
    • atomic number (1 for hydrogen): Z=1
    • principal quantum number (1, 2, 3, ...): n=4
  2. Formula: En=−Z2n2(13.6 eV)
  3. Substitute: Z=1,n=4
  4. Answer: En=−0.8504 eV

The value is small and negative: an electron this high up is only loosely held and needs little energy to escape.

How Do You Read an Energy Level Diagram?

An energy level diagram draws each level as a horizontal line, with energy increasing upward. The ground state is at the bottom, the excited states stack above it, and a line at zero marks the ionization limit. Vertical arrows between lines represent jumps: pointing up for absorption, pointing down for emission.

The length of an arrow equals the energy of the photon involved. A long arrow means a high-energy photon with a short wavelength, such as ultraviolet light. A short arrow means a low-energy photon, perhaps in the infrared. The table below lists hydrogen's first six levels, which is all the information you need to sketch the diagram yourself.

The first six energy levels of hydrogen
Level nNameEnergy (eV)Energy needed to ionize from this level (eV)
1Ground state−13.60613.606
2First excited state−3.4013.401
3Second excited state−1.5121.512
4Third excited state−0.8500.850
5Fourth excited state−0.5440.544
6Fifth excited state−0.3780.378
∞Ionization limit00
Source: Computed with E = −13.605 693 122 990 eV / n² (Rydberg energy from NIST CODATA 2022) · Retrieved October 2026

How Do Electrons Move Between Energy Levels?

An electron climbs to a higher level by absorbing energy and falls to a lower level by releasing it. When light is involved, the photon energy must match the gap exactly: Ephoton=Ei−Ef. With E=hf=hc/λ you can turn that gap into a frequency or wavelength, and our photon energy calculator does the conversion step by step.

Electrons can also be kicked upward by collisions. In 1914, James Franck and Gustav Hertz fired electrons through mercury vapor and found that they lost energy only in chunks of about 4.9 eV. That was direct evidence that the mercury atoms could accept energy only in fixed amounts.

An excited electron usually does not stay up for long. In many atoms it falls back within billionths of a second, sometimes in one jump and sometimes in a cascade of smaller steps, each releasing its own photon.

Example 2 Color of a jump from level 4 to level 2

A hydrogen electron falls from the n = 4 level to the n = 2 level. Using the Rydberg energy 13.605 693 122 990 eV (1 eV = 1.602 176 634 × 10⁻¹⁹ J), h = 6.626 070 15 × 10⁻³⁴ J·s and c = 299 792 458 m/s, what is the wavelength of the emitted photon in nanometers?

  1. Given:
    • Planck constant: h=6.626×10−34 J·s
    • speed of light in vacuum: c=299,792,458 m/s
    • n_i: ni=4
    • n_f: nf=2
  2. Formula: λ=hcEi−Ef=hc(13.6 eV)(1nf2−1ni2)
  3. Substitute: h=6.626×10−34 J·s,c=299,792,458 m/s,ni=4,nf=2
  4. Answer: λ=486 nm

This is the blue-green line of hydrogen. The measured line sits a fraction of a nanometer longer because this simple formula treats the nucleus as infinitely heavy.

How Do Energy Levels Create Spectral Lines?

Since the gaps between levels are fixed, the photons an atom emits come only in certain wavelengths. Pass the glow of a heated gas through a prism and you see thin, bright emission lines instead of a full rainbow. Shine white light through a cool gas and the same wavelengths appear as dark absorption lines.

Hydrogen's lines fall into families named by the level the electron lands on. Jumps that end on n = 1 form the ultraviolet Lyman series, jumps ending on n = 2 form the visible Balmer series, and jumps ending on n = 3 form the infrared Paschen series. The visible lines are covered in more detail on our hydrogen spectrum page.

Selected hydrogen spectral lines from level jumps
JumpSeriesPhoton energy (eV)Wavelength (nm)Region
2 → 1Lyman10.204121.5Ultraviolet
3 → 1Lyman12.094102.5Ultraviolet
3 → 2Balmer1.890656.1Visible red
4 → 2Balmer2.551486.0Visible blue-green
5 → 2Balmer2.857433.9Visible violet
6 → 2Balmer3.023410.1Visible violet
4 → 3Paschen0.6611874.6Infrared
Source: Computed with ΔE = 13.605 693 122 990 eV × (1/n_f² − 1/n_i²) and λ = hc/ΔE (CODATA 2022); measured lines are slightly longer because the real nucleus has finite mass · Retrieved October 2026
Electromagnetic spectrum with the visible band enlarged, where hydrogen's Balmer lines from jumps to level 2 appear
Jumps to n = 1 give ultraviolet light, jumps to n = 2 give visible light and jumps to n = 3 give infrared.

Do Other Atoms Have the Same Energy Levels as Hydrogen?

Only one-electron ions such as He⁺ and Li²⁺ follow the simple hydrogen formula, with every level deepened by a factor of Z². Once an atom has two or more electrons, the electrons repel one another and shield each other from the nucleus. Each main level then splits into sublevels labeled s, p, d and f, and the exact energies must be measured or computed numerically.

The splitting explains some quirks of the periodic table. In potassium, for example, the 4s sublevel ends up slightly below 3d, so it fills first. How many electrons fit on each level is set by the Pauli exclusion principle, which allows at most 2n² electrons in main level n: 2 in the first, 8 in the second and 18 in the third.

Molecules and solids have energy levels too. Molecules add closely spaced levels for vibration and rotation, while in a solid the levels of countless atoms merge into wide energy bands.

Example 3 Ground state of a helium ion

A helium ion that has lost one electron (He⁺, Z = 2) keeps a single electron in its n = 1 level. Using a Rydberg energy of 13.605 693 122 990 eV, what is that electron's energy?

  1. Given:
    • atomic number (1 for hydrogen): Z=2
    • principal quantum number (1, 2, 3, ...): n=1
  2. Formula: En=−Z2n2(13.6 eV)
  3. Substitute: Z=2,n=1
  4. Answer: En=−54.42 eV

Doubling the nuclear charge makes every level four times deeper, so the lone electron of He⁺ is held far more tightly than hydrogen's.

Where Do You See Energy Levels in Everyday Life?

Energy levels are at work in many familiar sights:

  • Neon and gas signs. An electric current excites gas atoms, and the colors you see come from electrons falling between the gas's own levels.
  • Flame tests and fireworks. Sodium gives a strong yellow-orange glow and copper compounds give green or blue, because each metal has different level gaps.
  • Fluorescent lamps. Mercury atoms emit ultraviolet light, and a coating on the tube absorbs it and re-emits visible light from its own levels.
  • Lasers. A laser keeps many atoms in an excited level and triggers them to drop together, producing light of one precise wavelength.
  • Starlight. Dark lines in a star's spectrum reveal which elements are present in its atmosphere, all from known level gaps.
Three burner flames colored yellow-orange, green and red by different metals, showing light from electron energy level jumps
Each metal colors a flame differently, because its electrons jump between a different set of energy levels.

Practice Energy Level Problems

To build confidence, compute a few level energies and photon wavelengths yourself, then compare the results with the tables on this page. Our atomic structure worksheets include printable questions on energy levels and electron jumps, and the electromagnetic spectrum worksheets practice the light side. To see how these ideas broke with classical physics, read classical vs quantum physics and the profile of Niels Bohr.

Common Misconceptions

Myth: Electrons travel around the nucleus in neat circular orbits, like planets.

Physics: Energy levels are real, but the planetary picture is not. In the quantum model each level corresponds to a cloud-like probability pattern, not a fixed path.

Myth: Energy levels are evenly spaced.

Physics: In atoms the gaps shrink as n increases, following 1/n² in hydrogen, so the levels bunch together just below the ionization limit.

Myth: An electron can absorb any photon that has at least enough energy to reach a higher level.

Physics: For a jump between two bound levels, the photon energy must match the gap exactly. Only photons above the ionization energy can be absorbed with any extra amount, and that extra becomes the freed electron's kinetic energy.

Myth: A negative energy means the electron has less than nothing.

Physics: The zero is chosen at a free electron at rest. A negative value simply means energy must be added to free the electron.

Key Facts

  • Electron energy levels are the fixed energies an electron bound to an atom is allowed to have.
  • Levels are labeled by the principal quantum number n, starting with the ground state at n = 1.
  • For hydrogen, the levels follow E = −13.6 eV / n², so the ground state sits at about −13.6 eV.
  • Energies are negative because a bound electron has less energy than a free electron at rest.
  • An electron jumping between levels absorbs or emits a photon whose energy exactly equals the gap.
  • Levels crowd closer together as n increases and approach zero at the ionization limit.
  • Each element has its own set of levels, which gives it a unique spectrum of colors.
Did you know? Helium was first identified in 1868 from an unexplained yellow line in the Sun's spectrum, decades before anyone found the gas on Earth, because its unique energy levels left a fingerprint in sunlight.

Quick Quiz: How Well Do You Know Electron Energy Levels?

6 questions. Tap an answer to check it.

  1. What is the energy of hydrogen's ground state?

  2. An electron falls from a higher to a lower level. What happens?

  3. Why do hydrogen's energy levels get closer together as n increases?

  4. Which hydrogen series contains visible light?

  5. How many electrons can the second main energy level hold?

  6. What did the Franck-Hertz experiment show?

Frequently Asked Questions

What is an energy level in simple terms?

An energy level is one of the fixed amounts of energy an electron is allowed to have inside an atom. You can think of the levels as shelves: the electron can rest on one shelf or another, but never between them. Moving from one shelf to another requires taking in or giving out exactly the energy difference, often as a particle of light.

How many electrons can each energy level hold?

Main level n can hold up to 2n² electrons. That gives 2 in the first level, 8 in the second, 18 in the third and 32 in the fourth. The limit comes from the Pauli exclusion principle, which forbids two electrons in an atom from sharing all four quantum numbers. In real atoms the outer levels often start filling before the inner ones are completely full.

Why are energy levels negative?

Physicists set the zero of energy at a free electron at rest, far from the atom. An electron held by the nucleus has less energy than that, so its energy is below zero. The more tightly it is bound, the more negative the value. The size of the negative number tells you how much energy you would need to free the electron.

What is the difference between the ground state and an excited state?

The ground state is the lowest energy level an electron can occupy, n = 1 in hydrogen. It is where electrons settle when nothing disturbs the atom. An excited state is any higher level. Electrons reach excited states by absorbing light, heat or collision energy, and they usually drop back to lower levels quickly, giving off photons as they go.

What happens when an electron moves to a higher energy level?

The atom must absorb energy equal to the gap between the two levels. This energy can come from a photon of exactly the right wavelength, from a collision with another particle, or from heat. The electron then sits in an excited state, usually for a very short time, before falling back down and releasing the energy as one or more photons.

Are energy levels the same as electron shells?

They are closely related. In chemistry, a shell is the group of electrons that share the same principal quantum number n, so each shell corresponds to a main energy level. Inside atoms with many electrons, each shell splits into sublevels called s, p, d and f with slightly different energies. Physicists tend to say levels, chemists tend to say shells.

How do energy levels explain the colors of fireworks?

Fireworks contain metal compounds that are heated in the explosion. The heat excites electrons in the metal atoms to higher levels, and when they fall back they emit photons with energies equal to the level gaps. Because each metal has different gaps, each produces its own color: sodium gives yellow-orange, while strontium and copper compounds give red and green or blue.

Who discovered electron energy levels?

Niels Bohr introduced fixed electron energy levels in 1913 to explain the spectral lines of hydrogen, building on Max Planck's idea that energy comes in discrete amounts. The Franck-Hertz experiment of 1914 confirmed that atoms accept energy only in fixed steps. In the 1920s, quantum mechanics showed that the levels arise from the wave nature of electrons.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.