Pressure in, voltage out

Piezoelectric Effect

The piezoelectric effect is the appearance of an electric voltage across certain crystals and ceramics when they are squeezed, bent or twisted. It also runs in reverse: apply a voltage and the same material changes shape very slightly. That two-way link between mechanical stress and electric charge powers grill lighters, quartz watches, ultrasound scanners and many sensors.

Small blue spark at a gas grill burner from a push-button igniter, an everyday use of the piezoelectric effect
A push-button grill lighter strikes a piezo crystal, and the voltage pulse jumps the gap as a spark.

At a Glance

The piezoelectric effect is the generation of electric charge in certain crystals, such as quartz, when a force deforms them. The charge produced is roughly proportional to the force, Q = d F, where d is the piezoelectric coefficient of the material. The reverse effect makes the crystal change shape when a voltage is applied.

What it is
Voltage produced by mechanical stress in certain crystals
Discovered
1880, by Pierre and Jacques Curie
Common materials
Quartz, PZT ceramics, barium titanate, PVDF plastic film
Direct effect
Squeeze the crystal, get a voltage
Converse effect
Apply a voltage, the crystal changes shape
Simple relation
Charge Q ≈ d × F (d = piezoelectric coefficient)
On this page
  1. What Is the Piezoelectric Effect?
  2. What Causes the Piezoelectric Effect?
  3. How Does Squeezing a Crystal Make Electricity Step by Step?
  4. What Is the Converse Piezoelectric Effect?
  5. Which Materials Are Piezoelectric?
  6. Where Do You See the Piezoelectric Effect in Everyday Life?
  7. How Much Electricity Can a Piezoelectric Crystal Produce?
  8. How Is the Piezoelectric Effect Related to Other Effects?
  9. Who Discovered the Piezoelectric Effect?
  10. Key Facts
  11. Quiz
  12. FAQ

What Is the Piezoelectric Effect?

The word comes from the Greek for "press", and that is the whole idea: press on the right kind of crystal and opposite faces of it become electrically charged. Connect wires to those faces and a voltage appears between them. Release the pressure and the charge flows back the other way.

Only some solids do this. Ordinary glass, metals and table salt do not, while quartz, tourmaline, Rochelle salt and a family of engineered ceramics do. The difference lies in how their atoms are arranged, which we explain below.

The effect works in both directions. The direct effect turns a mechanical push into electric charge. The converse effect turns an applied voltage into a tiny change in size, often far less than the width of a hair, but fast and very precise.

What Causes the Piezoelectric Effect?

Every crystal is built from positive and negative ions locked into a repeating pattern. In a crystal with a symmetric pattern, the center of the positive charge and the center of the negative charge sit at the same point in each small unit, so squeezing it changes nothing electrically. Piezoelectric crystals lack a center of symmetry. When you deform them, the positive and negative charge centers slide apart by a tiny distance.

That separation turns each unit cell into a small electric dipole. Billions of them line up in the same direction, so their charges cancel inside the crystal but not at the surfaces. One face ends up slightly positive and the opposite face slightly negative. The result is an electric field inside the material and a measurable voltage across it.

The size of the charge grows with the force. For small forces the relationship is close to linear, written Q=dF, where d is the piezoelectric coefficient in coulombs per newton. Quartz has a small coefficient of about 2 picocoulombs per newton, while modern lead zirconate titanate (PZT) ceramics reach a few hundred.

How Does Squeezing a Crystal Make Electricity Step by Step?

  1. Rest: the crystal is unstressed and each unit cell is electrically balanced, so the faces carry no net charge.
  2. Stress: a force compresses or bends the crystal and shifts the ions by a fraction of an atom's width.
  3. Polarization: because the structure is not symmetric, the shift separates the positive and negative charge centers in every cell.
  4. Surface charge: the inside stays neutral on average, but bound charge collects on two opposite faces, one positive and one negative.
  5. Voltage: metal electrodes on those faces pick up the charge, and a voltage appears across them that can drive a brief current.
  6. Release: when the force is removed, the ions spring back and the voltage reverses sign for a moment before settling at zero.

A key detail is that a steady squeeze does not give a steady voltage. The charge slowly leaks away through the measuring circuit and the crystal itself, so the effect is best at sensing changes, vibrations and sudden impacts. The graph shows how the voltage fades after one quick press.

Graph of piezo element voltage jumping to 8 V after a sudden press, then fading toward zero within about 100 milliseconds
A piezo element answers a quick press with a voltage spike that fades as the charge leaks through the circuit.

What Is the Converse Piezoelectric Effect?

Apply a voltage across a piezoelectric crystal and the electric field pushes its ions in opposite directions, so the crystal stretches or shrinks a little. Reverse the voltage and it moves the other way. Drive it with an alternating voltage and it vibrates in time with the signal.

The movement is tiny, often nanometers to micrometers, but it is fast, repeatable and needs no gears or magnets. That makes the converse effect ideal for buzzers, ultrasonic cleaners, precision positioning stages in microscopes and the small pumps in some inkjet print heads. Each cycle of the voltage gives one cycle of motion, so a crystal driven at its natural frequency can vibrate strongly with very little input power.

The two effects come as a pair. Any material that turns force into voltage will also turn voltage into motion, a link that was predicted from energy arguments shortly after the 1880 discovery and then confirmed by experiment.

Which Materials Are Piezoelectric?

  • Quartz: a natural and lab-grown crystal with a weak but extremely stable response. Its steadiness over temperature and time makes it the standard choice for frequency control.
  • PZT (lead zirconate titanate): a ceramic with a response more than a hundred times stronger than quartz. It powers most actuators, buzzers and ultrasound probes.
  • Barium titanate: one of the first piezoelectric ceramics, still used in some sensors and capacitors.
  • PVDF film: a flexible plastic that can be made piezoelectric, handy for wearable sensors and thin pressure pads.
  • Natural materials: bone, tendon, wood and even some proteins show a weak piezoelectric response.

Ceramics need one extra step. As made, their tiny crystal grains point in random directions and their effects cancel. Manufacturers "pole" them by applying a strong voltage while the part is warm, which lines the grains up. Heat the finished part above a limit called its Curie temperature and that alignment is lost for good, the same temperature named after Pierre Curie.

Cluster of clear six-sided quartz crystals on dark slate, the classic natural piezoelectric material
Quartz is the best-known natural piezoelectric crystal and the heart of most clocks and radios.

Where Do You See the Piezoelectric Effect in Everyday Life?

The most dramatic example is the push-button lighter on a gas grill or camping stove. Pressing the button cocks a spring that releases a small hammer onto a PZT crystal. The sharp blow produces a pulse of several thousand volts, enough to make a spark jump across a small air gap and ignite the gas.

A quieter example sits on many wrists. A quartz watch contains a tiny tuning fork cut from quartz that vibrates 32,768 times per second when driven by the converse effect. The direct effect feeds that vibration back as an electric signal, and a counting circuit halves it fifteen times to get one tick per second.

You also meet piezo parts in ultrasound scanners, car parking sensors, sonar, the knock sensor in a car engine, guitar pickups, smoke alarm sounders and the beepers in microwave ovens. Some microphones use a piezo element instead of a coil, especially contact microphones clipped to instruments.

Everyday piezoelectric devices and which direction of the effect they use
DeviceEffect usedWhat happens
Grill or stove lighterDirectA hammer strikes a crystal and the voltage pulse makes a spark
Quartz watchBothA quartz tuning fork vibrates at a fixed rate that keeps time
Ultrasound probeBothThe crystal sends sound pulses and turns the echoes into signals
Buzzer or beeperConverseAn alternating voltage flexes a disk that pushes on the air
Engine knock sensorDirectVibration from rough combustion produces a warning signal
Guitar pickupDirectString vibration passing through the bridge becomes a signal
Microscope positionerConverseVoltage moves a probe by tiny, controlled steps
Source: Qualitative summary written by our editors · Retrieved October 2026

How Much Electricity Can a Piezoelectric Crystal Produce?

The voltage can be high but the energy is small. A lighter crystal reaches thousands of volts, yet the charge involved is only a few millionths of a coulomb, so the total energy is a tiny fraction of a joule. That is plenty for a spark and far too little to run a lamp.

This is why piezoelectric energy harvesting has limits. Floor tiles, shoe inserts and road strips that turn footsteps or traffic into electricity have been tested, but they collect milliwatts rather than kilowatts. They suit low-power jobs such as wireless sensors and battery-free switches, not powering a building.

To measure a force, engineers care about charge rather than energy. The table compares how much charge two common materials give for the same push, using typical coefficients.

Charge produced by a steady push on two piezoelectric materials
Force (N)Roughly equal toQuartz, d ≈ 2.3 pC/NPZT ceramic, d ≈ 400 pC/N
1Weight of a small apple2.3 pC400 pC
10Firm press of a fingertip23 pC4 nC
50Pressing a stapler115 pC20 nC
100Standing on one foot (part of your weight)230 pC40 nC
Source: Computed with Q = d × F; coefficients are typical values, and real parts vary with cut, size and direction of force · Retrieved October 2026

Who Discovered the Piezoelectric Effect?

The brothers Pierre and Jacques Curie reported the direct effect in 1880 after testing crystals such as quartz, tourmaline and Rochelle salt. They showed that pressing on certain faces produced charge in proportion to the pressure. The converse effect was predicted on theoretical grounds the following year and the Curies soon confirmed it in the lab.

For decades the discovery stayed a laboratory curiosity. During World War I, researchers used quartz to send and receive underwater sound pulses for detecting submarines, an early form of sonar. Quartz frequency control arrived in the 1920s, and strong ceramics such as barium titanate and PZT followed from the 1940s and 1950s, which is when the effect moved into everyday products.

Key Facts

  • The piezoelectric effect is the production of electric charge when certain crystals are squeezed, bent or twisted.
  • It works only in materials whose crystal structure has no center of symmetry, such as quartz and PZT ceramics.
  • The converse effect makes the same materials change shape slightly when a voltage is applied.
  • For small forces the charge is roughly proportional to the force, Q = d × F.
  • A steady force gives only a brief voltage, so piezo sensors are best at detecting changes and vibrations.
  • Pierre and Jacques Curie discovered the effect in 1880.
  • Grill lighters, quartz watches, ultrasound probes and buzzers all rely on piezoelectric parts.
Did you know? Dry bone is weakly piezoelectric, and researchers have long studied whether the tiny voltages produced when bones flex play a part in how bone tissue remodels itself under load.

Quick Quiz: How Well Do You Know Piezoelectric Effect?

6 questions. Tap an answer to check it.

  1. What does the direct piezoelectric effect turn into electric charge?

  2. Why is ordinary table salt not piezoelectric?

  3. What happens when you apply an alternating voltage to a piezo disk?

  4. Why is a piezo sensor poor at measuring a constant weight for a long time?

  5. Who discovered the piezoelectric effect in 1880?

  6. Which device uses the piezoelectric effect to make a spark?

Frequently Asked Questions

What is the piezoelectric effect in simple terms?

It is the ability of some crystals to make electricity when you press on them. Squeezing the crystal nudges its positive and negative charges slightly apart, so one face becomes positive and the opposite face negative. Wires attached to those faces pick up a voltage. The same crystals also do the reverse: give them a voltage and they change shape a tiny amount.

What materials are piezoelectric?

Natural crystals such as quartz, tourmaline and Rochelle salt are piezoelectric. So are engineered ceramics like lead zirconate titanate, often shortened to PZT, and barium titanate, plus the plastic PVDF. Some biological materials, including bone and tendon, show a weak response. Common materials like glass, most metals and table salt are not piezoelectric because their crystal patterns are symmetric.

Can piezoelectric materials power a house?

Not in any practical way. A piezo element can produce a high voltage, but the charge, and therefore the energy, from each squeeze is very small. Footstep tiles and road strips collect milliwatts, enough for a sensor or a small light. Running a home takes thousands of watts, which solar panels, wind turbines or the grid supply far more cheaply.

Why does a quartz watch use 32,768 vibrations per second?

That number equals 2 multiplied by itself fifteen times. A simple digital circuit can halve a frequency again and again, so fifteen halvings turn 32,768 vibrations into exactly one pulse per second. The frequency is also high enough to be above human hearing and low enough to keep the quartz fork small and the battery drain low.

Does a piezoelectric crystal produce AC or DC?

A single press produces a short pulse, and the voltage reverses when the pressure is released. A crystal that is shaken or vibrated continuously produces an alternating voltage that follows the vibration. To charge a battery or run electronics from a vibrating piezo element, the output has to pass through a rectifier, which turns it into direct current.

How does a piezo grill lighter make a spark?

Pressing the button compresses a spring until a small hammer is released and strikes a piezo ceramic. The sudden impact produces a short pulse of several thousand volts. Wires carry that voltage to two metal tips separated by a small gap, and the electric field becomes strong enough to break down the air, creating a spark that lights the gas.

What is the difference between piezoelectric and pyroelectric?

Piezoelectric materials produce charge when they are mechanically stressed. Pyroelectric materials produce charge when their temperature changes. Every pyroelectric crystal is also piezoelectric, but not the other way around: quartz is piezoelectric yet not pyroelectric. Motion detectors for lights and alarms use pyroelectric sensors that respond to the warmth of a passing person.

Is the piezoelectric effect reversible?

Yes. Squeezing the crystal produces a voltage, which is the direct effect, and applying a voltage makes the crystal deform, which is the converse effect. The same piece of material can switch roles. An ultrasound probe does exactly this, using voltage pulses to send out sound and then turning the returning echoes back into electric signals.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.