Speeding up and slowing down a spin

Angular Acceleration

Angular acceleration is the rate at which an object's angular velocity changes, found by dividing the change in angular velocity by the time it takes. It is written α and measured in radians per second squared (rad/s²). A fan winding up, a drill bit starting and a wheel braking to a stop all have angular acceleration.

Wind turbine rotor starting to turn in the breeze, its blade tips blurred as the spin speeds up
As the wind picks up, a turbine rotor gains angular velocity, and the rate of that gain is its angular acceleration.

At a Glance

Angular acceleration is the change in angular velocity per unit time, α = Δω / Δt, measured in rad/s². A point at distance r from the axis has a tangential acceleration a_t = r α, and a net torque produces angular acceleration according to τ = I α.

Symbol
α (Greek alpha)
SI unit
radian per second squared (rad/s²), equal to s−2
Formula
α = Δω / Δt
Scalar or vector
Vector along the rotation axis; sign shows speeding up or slowing down
Linked to
Tangential acceleration at = rα, torque τ = Iα
On this page
  1. What Is Angular Acceleration?
  2. Angular Acceleration Explained Simply
  3. What Is the Formula for Angular Acceleration?
  4. Can Angular Acceleration Be Negative?
  5. How Is Angular Acceleration Related to Linear Acceleration?
  6. What Causes Angular Acceleration?
  7. What Are the Equations for Constant Angular Acceleration?
  8. Where Do You See Angular Acceleration in Everyday Life?
  9. Going Deeper: Average vs Instantaneous Angular Acceleration
  10. How Can You Practice Angular Acceleration Problems?
  11. Common Misconceptions
  12. Key Facts
  13. Quiz
  14. FAQ

What Is Angular Acceleration?

Angular acceleration describes how quickly a spin changes. An object turning at a steady rate has an angular velocity but zero angular acceleration. The moment it starts turning faster or slower, it has angular acceleration.

It is the rotational partner of ordinary acceleration. Linear acceleration tells you how many meters per second of speed are gained each second. Angular acceleration tells you how many radians per second of spin are gained each second, which is why its unit is rad/s².

A rigid object has a single angular acceleration for every point on it. The hub of a wheel and the tread of its tire speed up their rotation together, even though the tread moves through much more distance.

Angular Acceleration Explained Simply

Think of a playground merry-go-round. If it turns at the same steady rate, the ride feels smooth. If a friend runs alongside and pushes, the ride spins up and you feel yourself pressed backward. That spin-up is angular acceleration.

When the pushing stops and the bearings drag, the ride slowly winds down. That is angular acceleration too, just in the slowing direction. Big angular acceleration means the spin changes quickly; small angular acceleration means it changes gently.

One number covers the whole ride. Kids near the center and kids at the edge all complete their turns together, so they share the same angular acceleration, even though the kids at the edge feel a stronger shove.

What Is the Formula for Angular Acceleration?

The average angular acceleration over a time interval is α=ΔωΔt=ωf−ωitf−ti. Here ω is the angular velocity in rad/s and t is time in seconds, so α comes out in rad/s².

Speeds of motors and wheels are often quoted in revolutions per minute. Convert them first by multiplying by 2π/60; for example, 600 rpm is 62.8 rad/s. Mixing rpm with seconds is the most common source of wrong answers.

For a step-by-step solution with unit options, use our rotational motion calculator. The examples below work through the formula and its rearranged forms.

Here is the defining formula with each symbol and its SI unit, plus the forms solved for the change in angular velocity and the time.

α=ΔωΔt
What each symbol means
SymbolQuantitySI unit
αangular accelerationradian per second squared (rad/s²)
Δωchange in angular velocityradian per second (rad/s)
Δttime intervalsecond (s)

Rearranged to find another variable:

Δω=αΔtΔt=Δωα

Example 1 A ceiling fan switching on

A ceiling fan starts from rest and reaches an angular velocity of 18.8 rad/s after 5.0 s. What is its average angular acceleration?

  1. Given:
    • change in angular velocity: Δω=18.8 rad/s
    • time interval: Δt=5 s
  2. Formula: α=ΔωΔt
  3. Substitute: Δω=18.8 rad/s,Δt=5 s
  4. Answer: α=3.76 rad/s2

Every second the fan adds a little under 4 rad/s to its spin, so it reaches full speed in a few seconds without jerking.

Can Angular Acceleration Be Negative?

Yes. Choose one direction of turning as positive, usually counterclockwise. If the spin grows in that direction, α is positive. If the spin shrinks, or grows in the clockwise direction, α is negative.

As a vector, angular acceleration points along the axis of rotation, using the same right-hand rule as angular velocity. Curl the fingers of your right hand in the direction of turning and your thumb points along ω→. When the object speeds up, α→ points the same way; when it slows down, α→ points the opposite way.

A spinning top that is slowing because of friction has its angular velocity pointing up and its angular acceleration pointing down. The pattern is the same one you meet in straight-line motion, as our velocity vs acceleration comparison shows.

Example 2 How long does a grinding wheel take to stop?

A bench grinder wheel spinning at 300 rad/s is switched off and slows with a steady angular acceleration of −15 rad/s². How long does it take to stop?

  1. Given:
    • change in angular velocity: Δω=−300 rad/s
    • angular acceleration: α=−15 rad/s2
  2. Formula: Δt=Δωα
  3. Substitute: Δω=−300 rad/s,α=−15 rad/s2
  4. Answer: Δt=20 s

Both the change in angular velocity and the angular acceleration are negative, so the time comes out positive, as it must.

How Is Angular Acceleration Related to Linear Acceleration?

Every point on a spinning object moves along a circle. When the spin speeds up, each point also gains speed along its circle. That gain is the tangential acceleration, at=rα, where r is the distance from the axis.

So the farther a point sits from the axis, the larger its tangential acceleration, even though the angular acceleration is the same everywhere. The edge of a pizza cutter gains speed much faster than a point near its hub.

Points on a rotating object also have a centripetal acceleration toward the axis, ac=rω2, which exists even at constant spin. Angular acceleration adds the tangential part on top. Our page on linear and angular quantities brings all of these links together, and the graphs below show the rim of a merry-go-round speeding up, coasting and braking.

Example 3 The edge of a spinning-up bicycle wheel

A bicycle wheel of radius 0.34 m on a repair stand speeds up with an angular acceleration of 6.0 rad/s². What is the tangential acceleration of a point on its rim?

  1. Given:
    • radius: r=0.34 m
    • angular acceleration: α=6 rad/s2
  2. Formula: at=rα
  3. Substitute: r=0.34 m,α=6 rad/s2
  4. Answer: at=2.04 m/s2

A point halfway out along a spoke would have half this tangential acceleration, even though the whole wheel shares the same α.

Speed-time graph of a merry-go-round rim rising to 1.6 m/s over 8 s, holding steady, then dropping to zero in 4 s
At a radius of 2 m, α = 0.1 rad/s² gives the rim a tangential acceleration of 0.2 m/s², the slope of the rising line.
Acceleration-time graph of the merry-go-round rim: positive while spinning up, zero while coasting, negative while braking
Each flat step is the radius times the angular acceleration; the areas show the rim speed gained and then lost.

What Causes Angular Acceleration?

A net torque causes it. Just as a net force produces linear acceleration, a net torque produces angular acceleration. The relationship is Newton's second law for rotation, τnet=Iα.

The quantity I is the moment of inertia, which measures how hard an object is to spin up. It depends on both the mass and how far that mass sits from the axis. The same torque gives a large angular acceleration to a light, compact wheel and a small one to a heavy flywheel with its mass at the rim.

This is why race car wheels and bicycle rims are made light at the edge. Less mass far from the axis means a smaller moment of inertia and quicker spin-up for the same twist from the drivetrain.

What Are the Equations for Constant Angular Acceleration?

When α stays constant, spinning motion follows equations that mirror the straight-line kinematic equations. Replace distance with angle, velocity with angular velocity and acceleration with angular acceleration:

  • ω=ω0+αt
  • θ=ω0t+12αt2
  • ω2=ω02+2αθ

These let you find how many turns a wheel makes while braking, or how long a motor needs to reach full speed. A centrifuge spinning up at 20 rad/s² from rest, for instance, reaches 400 rad/s in 20 s and turns through 4,000 rad, about 637 revolutions, along the way (computed). Our rotational kinematics page covers the full set with more examples.

Where Do You See Angular Acceleration in Everyday Life?

Any time a rotating machine changes speed, angular acceleration is involved. A washing machine slowly spins its drum up to full speed so the load can settle evenly. A cordless drill reaches thousands of rpm in a fraction of a second, so its angular acceleration is large. A car's wheels pick up angular acceleration whenever the driver presses the gas or the brake.

In sports, a figure skater who pushes off the ice to start a spin, a discus thrower winding up and a gymnast swinging around a bar all create angular acceleration with their muscles. The table below compares typical values, worked out from start speeds, end speeds and times.

Typical average angular acceleration of everyday rotating objects
ObjectChange in angular velocityTimeAverage angular acceleration α (rad/s²)
Playground merry-go-round pushed by hand0 to 2.5 rad/s10 s0.25
Washing machine drum0 to 1,200 rpm (125.7 rad/s)60 s2.094
Turntable starting a record0 to 33⅓ rpm (3.491 rad/s)1.5 s2.327
Ceiling fan on high0 to 180 rpm (18.85 rad/s)6 s3.142
Car wheel, r = 0.32 m, car 0 to 27 m/s0 to 84.38 rad/s8 s10.55
Bicycle wheel braking, r = 0.34 m, 8 m/s to 023.53 rad/s to 03 s−7.843
Desktop hard drive spin-up0 to 7,200 rpm (754.0 rad/s)5 s150.8
Cordless drill0 to 2,400 rpm (251.3 rad/s)0.5 s502.7
Source: Computed with α = Δω / Δt, ω = rpm × 2π / 60 and ω = v / r · speeds and times are typical values · Retrieved October 2026
Cordless drill bit spinning up as it starts into a wooden plank, an example of large angular acceleration
A drill bit reaches full speed in a fraction of a second, which takes a large angular acceleration.

Going Deeper: Average vs Instantaneous Angular Acceleration

The formula Δω/Δt gives the average over an interval. If the spin changes unevenly, as in a car engine revving, the angular acceleration at a single instant is the limit as the interval shrinks: α=dω/dt. On a graph of angular velocity against time, it is the slope of the tangent line.

For non-uniform circular motion, the total linear acceleration of a point combines the tangential part rα and the centripetal part rω2 at right angles, so its size is (rα)2+(rω2)2. During a fast spin-up the tangential part can briefly dominate.

How Can You Practice Angular Acceleration Problems?

Work through a few problems on your own first. Our circular motion worksheets include printable sets with answer keys, and the rotational motion formulas sheet keeps every equation on one page. Check your answers with the rotational motion calculator, then try the quiz below.

Common Misconceptions

Myth: An object spinning at a high constant rate has a large angular acceleration.

Physics: Constant spin means zero angular acceleration. Angular acceleration measures how fast the spin changes, not how fast it is.

Myth: Points farther from the axis have a larger angular acceleration.

Physics: All points on a rigid body share the same α. Outer points have a larger tangential acceleration, a_t = rα, because r is larger.

Myth: Negative angular acceleration always means the object is slowing down.

Physics: The sign depends on your chosen positive direction. A clockwise spin that speeds up has negative α if counterclockwise is positive.

Myth: You can plug rpm straight into α = Δω / Δt with time in seconds.

Physics: Convert rpm to rad/s first by multiplying by 2π/60, or the units will not match and the answer will be off by about a factor of 10.

Key Facts

  • Angular acceleration is the rate of change of angular velocity, α = Δω / Δt.
  • Its SI unit is the radian per second squared, rad/s².
  • Every point on a rigid rotating object shares the same angular acceleration.
  • A point at distance r from the axis has tangential acceleration a_t = rα.
  • A net torque causes angular acceleration according to τ = Iα.
  • Angular acceleration is negative when the chosen positive spin is slowing down.
  • With constant α, rotation follows equations that mirror the linear kinematic equations.
Did you know? A small cordless drill can gain angular velocity hundreds of times faster than a washing machine drum, yet the drum ends up storing far more rotational energy because of its larger size and mass.

Quick Quiz: How Well Do You Know Angular Acceleration?

6 questions. Tap an answer to check it.

  1. What is the SI unit of angular acceleration?

  2. A wheel's angular velocity rises from 2 rad/s to 14 rad/s in 4 s. What is its average angular acceleration?

  3. On a rigid wheel that is speeding up, which point has the largest tangential acceleration?

  4. A fan spins at a steady 20 rad/s. What is its angular acceleration?

  5. What produces angular acceleration?

  6. The same torque is applied to two wheels of equal mass. Wheel B has its mass farther from the axis. Which spins up faster?

Frequently Asked Questions

What is angular acceleration in simple words?

Angular acceleration tells you how quickly something's spin is changing. If a wheel turns faster and faster, it has angular acceleration. If it turns at a steady rate, it has none. If it slows down, it has angular acceleration in the opposite direction to its spin. It is the spinning version of the ordinary acceleration you feel in a car.

What is the unit of angular acceleration?

The SI unit is the radian per second squared, written rad/s². Since the radian is a ratio of two lengths, the unit is sometimes written as s⁻². You may also see revolutions per minute per second for motors, or degrees per second squared in some engineering work. Convert to rad/s² before using the formulas τ = Iα or a_t = rα.

How do you find angular acceleration?

Subtract the starting angular velocity from the final angular velocity, then divide by the time taken. For example, a wheel that goes from 4 rad/s to 16 rad/s in 3 s has an average angular acceleration of 4 rad/s². If you know the torque and the moment of inertia instead, divide the net torque by the moment of inertia.

What is the difference between angular acceleration and angular velocity?

Angular velocity tells you how fast an object is turning, in radians per second. Angular acceleration tells you how fast that turning rate is changing, in radians per second squared. A fan running steadily on high has a large angular velocity but zero angular acceleration, while a fan just switched on has a small angular velocity and a large angular acceleration.

Is angular acceleration a vector?

Yes. Angular acceleration points along the axis of rotation. If the object speeds up, it points the same way as the angular velocity, found with the right-hand rule. If the object slows down, it points the opposite way. In many school problems the axis is fixed, so a plus or minus sign is enough to show the direction.

What is the relationship between torque and angular acceleration?

Net torque equals moment of inertia times angular acceleration, τ = Iα. This is Newton's second law written for rotation. Doubling the net torque on a wheel doubles its angular acceleration. Moving the same mass farther from the axis raises the moment of inertia, so the same torque then produces a smaller angular acceleration.

Does uniform circular motion have angular acceleration?

No. In uniform circular motion the angular velocity is constant, so the angular acceleration is zero. The object still has a centripetal acceleration pointing toward the center, because the direction of its velocity keeps changing. Angular acceleration appears only when the rate of turning itself changes, which adds a tangential acceleration along the path.

How do you convert rpm per second into rad/s²?

Multiply by 2π and divide by 60. One revolution is 2π radians and one minute is 60 seconds, so 1 rpm per second equals about 0.1047 rad/s². A motor that gains 300 rpm every second therefore has an angular acceleration of about 31.4 rad/s². Always do this conversion before combining the value with torque or radius.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.