Laser physicist, Nobel laureate

Donna Strickland

Donna Strickland is a Canadian laser physicist who, as a graduate student working with Gérard Mourou, co-invented chirped pulse amplification, a way to make extremely short laser pulses enormously powerful without destroying the laser. Born in 1959, she shared the 2018 Nobel Prize in Physics for that work, becoming only the third woman to receive it.

Illustration of a young physicist in a 1980s laser lab aligning mirrors as a thin beam bounces across an optical table
Illustration: a graduate student aligning a laser beam, in the spirit of Strickland's CPA experiments. Not a portrait.

At a Glance

Donna Strickland (born May 27, 1959, in Guelph, Canada) is a Canadian physicist who co-invented chirped pulse amplification (CPA) with Gérard Mourou in 1985. CPA stretches a short laser pulse, amplifies it and squeezes it back, giving peak powers set by P = W / t, energy divided by an extremely short time. She shared the 2018 Nobel Prize in Physics.

Born
May 27, 1959, Guelph, Ontario, Canada
Nationality
Canada
Field
Laser physics and nonlinear optics
Known for
Chirped pulse amplification of laser light (with Gérard Mourou)
Nobel Prize
Physics, 2018 (half shared with Gérard Mourou; other half to Arthur Ashkin)
Key relation
P = W / t (peak power of a pulse)
On this page
  1. Who Is Donna Strickland?
  2. Early Life and Education
  3. What Problem Was Strickland Trying to Solve?
  4. How Does Chirped Pulse Amplification Work, Explained Simply?
  5. Why Did Donna Strickland Win the Nobel Prize?
  6. What Is Chirped Pulse Amplification Used For?
  7. The Key Equation Behind Strickland's Work
  8. Career and Legacy
  9. Key Facts
  10. Quiz
  11. FAQ

Who Is Donna Strickland?

Donna Strickland is an experimental physicist who works with lasers, and in particular with pulses of light so short that they are measured in femtoseconds, millionths of a billionth of a second. Her best-known result, chirped pulse amplification (CPA), came out of her doctoral research in the mid-1980s and was described in her very first scientific paper.

CPA solved a problem that had stalled laser development for years. Physicists could make short pulses, but trying to amplify them to high energy damaged the very crystals and glass doing the amplifying. Strickland and her supervisor, Gérard Mourou, found a way around that limit, and their trick became the basis of nearly every high-intensity laser built since.

For this work she shared the 2018 Nobel Prize in Physics. She has spent most of her career as a professor at the University of Waterloo in Ontario, where she runs a laser lab and teaches students.

Early Life and Education

Strickland was born in Guelph, Ontario, on May 27, 1959. She grew up enjoying mathematics and physics, and as a teenager she was drawn to lasers and fiber optics, which were then new and exciting technologies.

She chose McMaster University in Hamilton because its engineering physics program included a strong focus on lasers and electro-optics. After finishing her bachelor's degree in 1981, she moved to the United States for graduate school at the University of Rochester in New York, a major center for optics research.

At Rochester she joined the group of the French physicist Gérard Mourou at the Laboratory for Laser Energetics. It was in that lab, while still a graduate student, that she built the first working chirped pulse amplification system. She completed her doctorate in optics in 1989.

Timeline of Donna Strickland's life and work
YearEvent
1959Born in Guelph, Ontario, Canada, on May 27
1981Earns a bachelor's degree in engineering physics at McMaster University
1985Publishes chirped pulse amplification with Gérard Mourou, her first scientific paper
1989Completes her doctorate in optics at the University of Rochester
Late 1980s to 1990sResearch posts at the National Research Council of Canada, Lawrence Livermore and Princeton
1997Joins the University of Waterloo
2013Serves as president of the Optical Society
2018Shares the Nobel Prize in Physics with Gérard Mourou and Arthur Ashkin
Source: Birth date, birthplace and Nobel year from our physicists data file (Wikidata and Nobel Prize data, CC0); other years are standard biographical dates · Retrieved October 2026

What Problem Was Strickland Trying to Solve?

By the early 1980s, lasers could already produce very brief pulses, but those pulses carried little energy. The obvious next step was to pass them through an amplifier, a piece of laser material that adds energy to the light passing through it. The trouble was intensity. When a short pulse gains a lot of energy, its power per square centimeter climbs so high that the light itself starts to change the glass, focusing into hot spots and cracking or burning the optics.

Engineers could spread the beam over a wider area to keep the intensity down, but that meant huge, expensive amplifiers. For about two decades the peak intensity of lasers had grown only slowly. What was needed was a way to keep the pulse gentle while it was being amplified and make it intense only afterward.

How Does Chirped Pulse Amplification Work, Explained Simply?

The idea works in three stages, and the word "chirp" describes the first one. A short pulse of light contains a spread of colors. If you send it through something that delays some colors more than others, the pulse stretches out in time, with the redder light running ahead and the bluer light trailing behind, a bit like a bird's chirp sliding in pitch.

  1. Stretch: the short pulse is spread out in time, often by thousands of times, so its peak power drops to a safe level.
  2. Amplify: the long, weak pulse passes through the amplifier and gains a large amount of energy without damaging it.
  3. Compress: a pair of diffraction gratings sends the colors along slightly different path lengths, undoing the stretch and squeezing all that energy back into a very short burst.

Picture a crowd that must pass through a narrow doorway without crushing anyone. You let people through one at a time, then have them regroup on the other side. The doorway is the amplifier, and the regrouping is the compressor. In the first experiments, a long optical fiber did the stretching, using the fact that glass slows different colors by slightly different amounts, the same dispersion that makes a prism spread white light.

Why Did Donna Strickland Win the Nobel Prize?

The 2018 Nobel Prize in Physics honored inventions in laser physics. Half went to Arthur Ashkin for optical tweezers, which hold tiny particles and living cells with light. The other half was shared by Mourou and Strickland for their method of generating high-intensity, ultra-short optical pulses.

The award came 33 years after their paper appeared, a common gap for the Nobel, which tends to wait until a discovery has proved its value. By 2018, CPA lasers were in laboratories, hospitals and factories around the world.

Strickland became the third woman to win the physics prize, after Marie Curie in 1903 and Maria Goeppert Mayer in 1963. The long gap drew wide attention, and her win is part of the story told on our page about women in physics. Our list of Nobel Prize in Physics winners puts the 2018 award in context.

What Is Chirped Pulse Amplification Used For?

Because a CPA pulse delivers its energy before heat can spread, it can cut material with very little damage to the area around the cut. That makes it valuable in medicine and manufacturing:

  • Eye surgery: femtosecond lasers are used in many corrective eye procedures to make precise cuts inside the cornea.
  • Micromachining: manufacturers drill tiny holes and cut fine patterns in glass, metal and plastics, for example in electronics and medical devices.
  • Research: the most powerful lasers in the world use CPA to reach petawatt peak powers, letting scientists study matter under extreme conditions, accelerate particles over short distances and produce bright X-ray bursts.
  • Attosecond science: intense short pulses drive the process that creates even shorter flashes of light, used to watch electrons move. That line of work was recognized by the 2023 physics prize shared by Anne L'Huillier and two colleagues.

The Key Equation Behind Strickland's Work

The physics that makes CPA worthwhile is the definition of power: energy divided by the time over which it is delivered, P=Wt. A pulse does not need a huge amount of energy to be extraordinarily powerful. It just needs to deliver modest energy in an extremely short time.

Focusing the beam then concentrates that power onto a tiny area, and the intensity, power per unit area, becomes enormous. The two examples below follow a pulse from its energy and duration to its peak power, then to its intensity at a focus. You can try your own numbers with our power calculator.

The reason a short pulse is so powerful comes down to this simple relation between energy, time and power.

P=Wt
What each symbol means
SymbolQuantitySI unit
Paverage powerwatt (W)
Wwork done or energy transferredjoule (J)
ttimesecond (s)

Rearranged to find another variable:

W=Ptt=WP

Example 1 Peak power of a modest laser pulse

A tabletop laser fires a pulse carrying 0.5 J of energy that lasts 50 femtoseconds (1 fs = 10^-15 s). Treating the power as steady during the pulse, what is its peak power?

  1. Given:
    • work done or energy transferred: W=0.5 J
    • time: t=50 fs
  2. Formula: P=Wt×10−15
  3. Substitute: W=0.5 J,t=50 fs
  4. Answer: P=1×1013 W

Half a joule is about the energy needed to lift an apple half a meter, yet squeezed into 50 fs it gives a power several times larger than the average rate at which the whole world uses electricity.

Example 2 Focusing that pulse to a tiny spot

A pulse with a peak power of 1.0 × 10^13 W is focused onto a circular spot with a radius of 5 micrometers (5 × 10^-6 m). What is the intensity at the focus?

  1. Given:
    • power carried by the wave: P=1×1013 W
    • radius of the focal spot: r=5×10−6 m
  2. Formula: I=Pπr2
  3. Substitute: P=1×1013 W,r=5×10−6 m
  4. Answer: I=1.273×1023 W/m2

Intensities this high strip electrons from atoms almost instantly, which is why CPA lasers opened a new field of high-field physics.

Why short pulses are powerful: the same 1 J of energy delivered over different times
DurationDuration in secondsPeak power (P = W / t)
1 second11 W
1 millisecond10-31,000 W (1 kW)
1 nanosecond10-9109 W (1 GW)
1 picosecond10-121012 W (1 TW)
100 femtoseconds10-131013 W (10 TW)
10 femtoseconds10-141014 W (100 TW)
Source: Computed with P = W / t for W = 1 J · Retrieved October 2026

Career and Legacy

After Rochester, Strickland worked at the National Research Council of Canada, at Lawrence Livermore National Laboratory in California and at Princeton University before joining the University of Waterloo in 1997. Her group there develops new laser sources, including ways to generate ultrafast pulses at many different wavelengths at once.

She has been active in the optics community, serving as president of the Optical Society (now called Optica) in 2013. When she won the Nobel Prize she held the rank of associate professor, a detail that drew public comment about how scientists are recognized, and she was promoted to full professor soon afterward.

Strickland often says she simply wanted to build a laser that worked. Her story shows how a graduate student project, done carefully and well, can reshape an entire field and reach millions of people through technology they may never notice.

Key Facts

  • Donna Strickland was born on May 27, 1959, in Guelph, Ontario, Canada.
  • She co-invented chirped pulse amplification with Gérard Mourou while a graduate student at the University of Rochester.
  • The 1985 paper describing CPA was her first scientific publication.
  • CPA stretches a short pulse, amplifies it safely, then compresses it back into an intensely powerful burst.
  • She shared the 2018 Nobel Prize in Physics and was the third woman ever to win it.
  • CPA lasers are used in corrective eye surgery, precision manufacturing and the most powerful research lasers.
  • She has been a professor at the University of Waterloo since 1997.
Did you know? When the 2018 Nobel Prize was announced, Strickland did not yet have her own page on a major online encyclopedia, which became a widely discussed example of how women scientists can be overlooked.

Quick Quiz: How Well Do You Know Donna Strickland?

6 questions. Tap an answer to check it.

  1. Which method did Donna Strickland co-invent?

  2. What is the correct order of steps in chirped pulse amplification?

  3. Why could short pulses not simply be amplified directly?

  4. If the same energy is delivered in one tenth of the time, what happens to the peak power?

  5. Who shared the 2018 Nobel Prize in Physics with Strickland?

  6. At which university did Strickland do her CPA experiments?

Frequently Asked Questions

What is Donna Strickland known for?

Strickland is known for co-inventing chirped pulse amplification with Gérard Mourou in 1985. The method lets lasers produce extremely short and extremely powerful pulses without damaging their own optics. It underpins femtosecond lasers used in eye surgery and precision machining, and the most powerful research lasers. She shared the 2018 Nobel Prize in Physics for it.

What is chirped pulse amplification in simple terms?

It is a three-step trick for making laser pulses powerful. First the short pulse is stretched in time so its power drops. Then it is amplified while it is long and gentle, which keeps the amplifier from being damaged. Finally it is compressed back into a very short pulse, so all the added energy arrives in a tiny instant.

Who did Donna Strickland share the Nobel Prize with?

The 2018 Nobel Prize in Physics was split in two halves. One half went to Arthur Ashkin for inventing optical tweezers. The other half was shared by Donna Strickland and Gérard Mourou, her doctoral supervisor, for their method of generating high-intensity, ultra-short optical pulses, known as chirped pulse amplification.

How many women have won the Nobel Prize in Physics?

When Strickland won in 2018, she became the third woman to receive the physics prize, after Marie Curie in 1903 and Maria Goeppert Mayer in 1963. Since then Andrea Ghez won in 2020 and Anne L'Huillier in 2023, so five women had won by the end of 2023. The small number remains a widely discussed issue in physics.

Where did Donna Strickland study?

She earned a bachelor's degree in engineering physics at McMaster University in Hamilton, Ontario, in 1981. She then completed a doctorate in optics at the University of Rochester in New York in 1989, working in Gérard Mourou's group at the Laboratory for Laser Energetics, where she carried out the chirped pulse amplification experiments.

Is chirped pulse amplification used in LASIK eye surgery?

Yes, in many procedures. Femtosecond lasers built on chirped pulse amplification can make very precise cuts inside the cornea with little heating of the nearby tissue. In some forms of corrective eye surgery such a laser creates the thin flap or cut, and a separate laser then reshapes the cornea to correct vision.

Why is it called a chirp?

A chirp is a signal whose frequency slides up or down over time, like a bird call that rises in pitch. When a laser pulse is stretched, its colors spread out so that the frequency of the light changes steadily from the front of the pulse to the back. That sliding frequency is what gives the method its name.

Where does Donna Strickland work now?

Strickland is a professor in the Department of Physics and Astronomy at the University of Waterloo in Ontario, Canada, where she has worked since 1997. Her group develops new kinds of ultrafast laser sources. She is also an active voice in the optics community and served as president of the Optical Society in 2013.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.