Machines that speed up particles

Particle Accelerators and Detectors

A particle accelerator is a machine that uses electric fields to speed up charged particles, such as electrons, protons or ions, to high energies and magnetic fields to steer and focus them into a beam. The beam is aimed at a target or at another beam, and particle detectors record what comes out. Accelerators range from hospital machines that treat cancer to rings many kilometers around.

Long linear accelerator hall with a row of copper accelerating cavities joined by a beam pipe, where electric fields speed up particles
A linear accelerator lines up many accelerating cavities so particles gain energy in one straight pass.

At a Glance

A particle accelerator gives charged particles energy by passing them through electric fields: a particle with charge q crossing a potential difference ΔV gains energy ΔU = q ΔV, so one electron crossing 1 volt gains 1 electronvolt. Magnets bend and focus the beam, and detectors around the collision point track, measure and identify the particles produced.

What it does
Speeds up charged particles into a narrow, high-energy beam
Accelerates with
Electric fields (static voltage or radio-frequency cavities)
Steers with
Dipole magnets bend, quadrupole magnets focus
Key formula
ΔU = qΔV (energy gained crossing a voltage)
Main types
Electrostatic, linear (linac), cyclotron, synchrotron, collider
Detectors measure
Track, momentum, energy and identity of each particle
On this page
  1. What Is a Particle Accelerator?
  2. How Does a Particle Accelerator Work Step by Step?
  3. How Do Electric Fields Give Particles Energy?
  4. How Do Magnets Steer the Beam?
  5. Why Can't Particles Reach the Speed of Light?
  6. What Are the Main Types of Particle Accelerators?
  7. How Do Particle Detectors Work?
  8. What Are Particle Accelerators Used For?
  9. Who Invented the Particle Accelerator?
  10. Common Misconceptions
  11. Key Facts
  12. Quiz
  13. FAQ

What Is a Particle Accelerator?

A particle accelerator is a machine that takes charged particles and pushes them, again and again, with electric forces until they move extremely fast. The particles travel inside a pipe pumped to a very high vacuum so they do not bump into air molecules. Magnets guide the beam along its path and squeeze it into a narrow pencil.

At the end of the line the beam does a job. It might strike a metal target to make X-rays for cancer treatment, crash into another beam to create new particles, or circle a ring to give off intense light used to study materials. In research machines, large instruments called particle detectors surround the collision point and record everything that flies out.

The old-style television tube was a small accelerator: it sped up electrons through a few tens of kilovolts and steered them onto a glowing screen. Modern research machines use the same basic ideas, scaled up enormously.

How Does a Particle Accelerator Work Step by Step?

  1. Make the particles. A heated filament boils off electrons, or a gas such as hydrogen is ionized to free protons or ions.
  2. Accelerate them. The particles cross gaps where an electric field pushes them forward. In most modern machines, metal chambers called RF cavities hold an electric field that flips direction millions of times per second, timed so the particles always feel a forward push.
  3. Bend the beam. Dipole magnets create a field that curves the path of each charged particle, keeping it on a circular or curved track.
  4. Focus the beam. Quadrupole magnets act like lenses, squeezing the beam so it does not spread out over thousands of turns.
  5. Use the beam. The beam hits a fixed target, collides head-on with a second beam, or is directed into a patient or a sample.
  6. Detect the results. Layers of detectors measure the paths, energies and types of the particles that come out, and computers reconstruct each event.

How Do Electric Fields Give Particles Energy?

A charged particle in an electric field feels a force, and if it moves along that force, the field does work on it. Crossing a potential difference ΔV changes the particle's energy by ΔU=qΔV. For a proton or an electron, whose charge has size e, each volt crossed adds one electronvolt (eV) of energy. This is why beam energies are quoted in keV, MeV, GeV or TeV. Our electric potential page explains the idea of voltage in more depth.

The diagram shows the simplest case: a uniform field between two plates. A single gap like this can only reach a few million volts before sparks jump across, which caps the energy of one-step machines. To go higher, accelerators reuse the same modest voltage many times. A proton that crosses a 1 MV gap a thousand times gains about 1 GeV.

Every accelerator rests on this relation: a charge gains energy equal to its charge times the voltage it falls through.

ΔV=ΔUq
What each symbol means
SymbolQuantitySI unit
ΔVpotential differencevolt (V)
ΔUchange in electric potential energyjoule (J)
qcharge movedcoulomb (C)

Rearranged to find another variable:

ΔU=qΔVq=ΔUΔV

Example 1 Energy gained by a proton across a high-voltage gap

A proton (charge 1.602 176 634 × 10^-19 C) starts at rest and crosses an accelerating gap with a potential difference of 750,000 V. How much kinetic energy does it gain, in joules?

  1. Given:
    • potential difference: ΔV=750,000 V
    • charge moved: q=1.602×10−19 C
  2. Formula: ΔU=qΔV
  3. Substitute: ΔV=750,000 V,q=1.602×10−19 C
  4. Answer: ΔU=1.202×10−13 J

By the definition of the electronvolt, this is exactly 0.75 MeV; accelerator physicists almost always quote beam energies in eV for that reason.

Uniform electric field between two plates 0.5 m apart at 750 kV, the accelerating gap that pushes a proton forward
Crossing this 750 kV gap gives a proton 0.75 MeV of kinetic energy, whatever the plate spacing.

How Do Magnets Steer the Beam?

Magnets cannot speed particles up, because the magnetic force always acts at right angles to the motion. What they can do is change direction. A charge moving across a magnetic field follows a circle whose radius is r=mv|q|B, so a stronger field bends the beam more tightly. You can explore that relation on our magnetic force on a moving charge page.

In a cyclotron, a single large magnet keeps particles circling inside two hollow D-shaped electrodes, and an alternating voltage kicks them every time they cross the gap. As they gain speed their circles grow, spiraling outward until the beam is extracted. The worked example shows why the kicking voltage must alternate at a radio frequency.

In a synchrotron, the particles stay on one fixed ring. As they gain energy, the bending magnets are ramped up in step, so the radius never changes. That design allows much larger and more powerful machines.

Example 2 Radio frequency of a proton cyclotron

In a cyclotron, protons (mass 1.672 621 925 95 × 10^-27 kg, charge 1.602 176 634 × 10^-19 C) circle in a 1.5 T magnetic field. At what frequency must the accelerating voltage alternate to stay in step with them?

  1. Given:
    • charge: q=1.602×10−19 C
    • magnetic field: B=1.5 T
    • mass: m=1.673×10−27 kg
  2. Formula: f=|q|B2πm
  3. Substitute: q=1.602×10−19 C,B=1.5 T,m=1.673×10−27 kg
  4. Answer: f=22,870,000 Hz

That is tens of megahertz, a radio frequency, which is why accelerating structures are called RF cavities. The frequency does not depend on speed, as long as the protons stay well below the speed of light.

Why Can't Particles Reach the Speed of Light?

As particles approach the speed of light, special relativity takes over. Their energy keeps rising with every push, but their speed creeps closer and closer to light speed without ever reaching it. The Lorentz factor γ tracks how far into this regime a particle is: γ = 1 at rest, and it grows without limit as the speed nears c.

This has practical effects. In a cyclotron, fast protons fall out of step with the fixed radio frequency, which limits classic cyclotrons to modest energies. Electrons, about 1,836 times lighter than protons, reach nearly the speed of light after only a few MeV, so electron machines run at an almost constant speed from early in the beam line. The energy of a fast particle follows from mass-energy equivalence extended by γ.

Example 3 Lorentz factor of a 2 GeV proton

A synchrotron gives protons a kinetic energy of 2.0 GeV, which is 3.204 × 10^-10 J. Using the proton mass 1.672 621 925 95 × 10^-27 kg, what is the Lorentz factor γ of each proton?

  1. Given:
    • KE: KE=3.204×10−10 J
    • m: m=1.673×10−27 kg
    • speed of light in vacuum: c=299,792,458 m/s
  2. Formula: γ=1+KEmc2
  3. Substitute: KE=3.204×10−10 J,m=1.673×10−27 kg,c=299,792,458 m/s
  4. Answer: γ=3.132

A Lorentz factor near 3 corresponds to about 95% of the speed of light (computed from v = c√(1 − 1/γ²)); adding more energy now raises γ a lot but the speed only a little.

What Are the Main Types of Particle Accelerators?

Accelerators are sorted mainly by the shape of the path and the way the voltage is applied. The table summarizes the common designs. Electrostatic machines use one large steady voltage. Linear accelerators, or linacs, line up many RF cavities in a straight row. Circular machines bend the beam so it passes the same cavities many times.

Colliders are a special case: two beams travel in opposite directions and meet head-on, so nearly all of their energy is available for making new particles. The largest example is the Large Hadron Collider, whose ring is about 27 km around.

Main types of particle accelerators
TypeHow it acceleratesPathTypical use
Electrostatic (Van de Graaff, Cockcroft-Walton)One large steady voltageStraightIon beams for materials analysis, early nuclear physics
Linear accelerator (linac)Many RF cavities in a rowStraightRadiotherapy, injectors, X-ray free-electron lasers
CyclotronAlternating voltage across a gap, fixed magnetOutward spiralMedical isotopes, proton therapy
SynchrotronRF cavities, magnets ramped with energyFixed ringHigh-energy protons, light sources
Storage ringRF cavities replace lost energyFixed ringSynchrotron light, stored beams
ColliderTwo synchrotrons or linacs aimed at each otherRings or straight linesDiscovery of new particles
Source: Qualitative summary of standard accelerator classifications · Retrieved October 2026

How Do Particle Detectors Work?

A particle detector is built like an onion, with each layer catching a different kind of particle. Most detectors work because fast charged particles knock electrons out of atoms as they pass, leaving a trail of ionization that electronics can sense.

  • Tracking layers made of thin silicon sensors or gas chambers record points along each charged particle's path. Inside a strong magnet the tracks curve, and the curvature gives the momentum and the sign of the charge.
  • Electromagnetic calorimeters stop electrons, positrons and photons and measure their energy from the shower of light or charge they make.
  • Hadronic calorimeters stop protons, neutrons and pions and measure their energy.
  • Muon chambers sit on the outside, because muons pass through almost everything else.

Neutrinos escape all of these layers, so they show up only as missing momentum when every other particle is added up. Smaller instruments such as Geiger counters and scintillators work on the same ionization idea; see radiation detectors.

What Are Particle Accelerators Used For?

Most of the tens of thousands of accelerators in the world are not used for particle physics. They work in hospitals, factories and labs:

  • Cancer treatment: compact electron linacs make X-ray beams for radiotherapy, and some centers use protons or carbon ions that deposit most of their energy at a chosen depth. See medical uses of radiation.
  • Medical isotopes: hospital cyclotrons make short-lived isotopes such as fluorine-18 for PET scans, which detect positrons.
  • Computer chips: ion implanters fire boron, phosphorus and other ions into silicon wafers to set their electrical properties.
  • Sterilization and materials: electron beams sterilize medical supplies and toughen plastics and cable insulation.
  • Synchrotron light: electrons circling a storage ring give off intense light from the infrared to hard X-rays, used to map proteins, batteries and fossils.
  • Discovery science: colliders made the discoveries of the W and Z bosons and the Higgs boson, and accelerators produce antimatter for study.
Electromagnetic spectrum from radio to gamma rays, with synchrotron light covering infrared through X-rays
Electrons bent in a storage ring give off light across a broad band, from infrared to hard X-rays.
Empty radiotherapy room with a white medical linear accelerator over a patient couch, a compact accelerator used against cancer
Hospital linacs accelerate electrons to make the X-ray beams used in cancer treatment.

Who Invented the Particle Accelerator?

Accelerators grew out of the race to split the nucleus. In 1932 John Cockcroft and Ernest Walton used a high-voltage machine to fire protons at lithium and split its nuclei, the first nuclear reaction driven by artificially accelerated particles; they later shared the 1951 Nobel Prize in Physics. Around the same years Robert Van de Graaff built his belt-charged electrostatic generator.

Also in the early 1930s, Ernest Lawrence built the first cyclotrons in California, small enough at first to hold in one hand. He received the 1939 Nobel Prize in Physics for the invention. In the 1940s the synchrotron idea solved the relativity problem of the cyclotron, and from the 1970s onward colliding-beam machines became the main tool of particle physics, leading to the LHC, which began operating in 2008.

Common Misconceptions

Myth: Magnets are what speed up the particles in an accelerator.

Physics: Only electric fields add energy. Magnets bend and focus the beam, since the magnetic force is perpendicular to the motion and does no work.

Myth: With enough energy, a particle accelerator could push particles faster than light.

Physics: Speed approaches but never reaches c. Extra energy raises the Lorentz factor and momentum, while the speed changes by tiny amounts.

Myth: Particle accelerators exist only in giant physics labs.

Physics: Tens of thousands are in use worldwide, most of them compact machines in hospitals and factories that treat tumors, make isotopes or implant ions into chips.

Key Facts

  • A particle accelerator uses electric fields to speed up charged particles and magnets to bend and focus the beam.
  • A particle with charge e gains 1 electronvolt of energy for every volt it crosses, from ΔU = qΔV.
  • Magnets change a beam's direction but cannot change its speed, because magnetic force is always at right angles to the motion.
  • Linacs push particles in a straight line, while cyclotrons and synchrotrons bend them so they pass the accelerating fields many times.
  • Near light speed, more energy raises the Lorentz factor sharply but barely increases the speed.
  • Detectors are built in layers: trackers, electromagnetic and hadronic calorimeters, then muon chambers.
  • Most accelerators worldwide are used in medicine and industry, not in particle physics.
Did you know? An electron that crosses just 1 volt gains 1.602 176 634 × 10⁻¹⁹ joules, exactly one electronvolt, so the unit that labels the most powerful machines on Earth is defined by a single battery-sized step.

Quick Quiz: How Well Do You Know Particle Accelerators and Detectors?

6 questions. Tap an answer to check it.

  1. What actually increases the energy of particles in an accelerator?

  2. How much energy does a proton gain crossing a 1,000 V potential difference?

  3. What is the job of quadrupole magnets?

  4. In which machine do particles spiral outward inside one magnet?

  5. Which detector layer is usually on the outside?

  6. Who received the 1939 Nobel Prize in Physics for inventing the cyclotron?

Frequently Asked Questions

What is a particle accelerator in simple terms?

A particle accelerator is a machine that makes tiny charged particles, such as electrons or protons, go extremely fast. Electric fields push them forward, magnets guide them along a path, and the fast beam is then aimed at a target or another beam. Detectors around the impact point record what happens so scientists can study it.

How does a particle accelerator work?

Charged particles are produced at a source, then pass through accelerating gaps or RF cavities where electric fields push them forward. Dipole magnets bend the beam and quadrupole magnets keep it narrow. The beam travels in a vacuum pipe so it does not hit air molecules, and finally strikes a target, a patient or another beam.

What is a particle accelerator used for?

Accelerators treat cancer with X-ray and proton beams, make medical isotopes for scans, implant ions into computer chips, sterilize medical supplies and produce bright X-ray light for studying materials. In research they create new particles in collisions, which is how the W, Z and Higgs bosons were discovered, and they also produce antimatter for experiments.

What are the main types of particle accelerators?

The main types are electrostatic accelerators, which use one large voltage; linear accelerators, which line up many RF cavities in a straight line; cyclotrons, where particles spiral outward in a fixed magnet; and synchrotrons, where particles circle a fixed ring while the magnets strengthen. Colliders aim two beams at each other.

What does a particle detector do?

A particle detector records the particles produced when a beam hits a target or another beam. Tracking layers trace charged particles and, inside a magnet, measure their momentum from the curvature. Calorimeters stop particles and measure their energy, and outer chambers catch muons. Together the layers identify each particle and reconstruct the collision.

Are particle accelerators dangerous?

The beams are dangerous to stand in, and collisions produce radiation, so accelerators are shielded with concrete and earth and lock people out while running. Outside the shielding, exposure is kept low by design. Claims that colliders could create Earth-swallowing black holes were studied carefully; cosmic rays have hit Earth at higher energies for billions of years without harm.

Who invented the particle accelerator?

Several people developed early designs around 1930. John Cockcroft and Ernest Walton built a high-voltage accelerator and split lithium nuclei in 1932. Robert Van de Graaff created his electrostatic generator in the same period, and Ernest Lawrence invented the cyclotron, earning the 1939 Nobel Prize in Physics.

What is the difference between a linear and a circular accelerator?

A linear accelerator pushes particles once along a straight line of accelerating cavities, so its final energy depends on its length. A circular accelerator bends the beam around a ring so particles pass the same cavities many times. Circular machines reach high energies in less space, but light particles such as electrons lose energy as radiation when bent.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.