Molecules you can almost see

Brownian Motion

Brownian motion is the random, zigzag movement of small particles suspended in a liquid or gas, caused by uneven bombardment from the fluid's own molecules. A speck of pollen debris or a fat droplet in milk never sits still under a microscope, and that restless dance was one of the first direct clues that atoms and molecules are real.

A plain laboratory microscope with a drop of diluted milk on a glass slide, the classic setup for watching Brownian motion
A drop of diluted milk under an ordinary microscope is enough to see fat droplets trembling with Brownian motion.

At a Glance

Brownian motion is the random jiggling of tiny particles suspended in a fluid, caused by fast-moving molecules hitting them unevenly from all sides. The average squared distance a particle wanders grows in proportion to time, = 2Dt, where D = k_B T / (6πηr) depends on temperature, the fluid's viscosity and the particle's radius.

What it is
Random, never-ending motion of small particles suspended in a fluid
Cause
Unbalanced collisions with the fluid's moving molecules
Particle size
Clearest for particles from about 0.1 to a few micrometers across
Key relation
<x²> = 2Dt (spread grows with the square root of time)
Explained by
Albert Einstein (1905) and Marian Smoluchowski (1906)
First reported
Robert Brown, botanist, 1827
On this page
  1. What Is Brownian Motion?
  2. What Causes Brownian Motion?
  3. How Does Brownian Motion Happen, Step by Step?
  4. How Far Does a Brownian Particle Wander?
  5. What Makes Brownian Motion Faster or Slower?
  6. Who Discovered Brownian Motion?
  7. Where Can You See Brownian Motion?
  8. How Is Brownian Motion Related to Diffusion?
  9. Common Misconceptions
  10. Key Facts
  11. Quiz
  12. FAQ

What Is Brownian Motion?

Brownian motion is the irregular wandering of a small particle that floats in a liquid or a gas. Put a drop of diluted milk under a microscope and the tiny fat globules shiver and drift in random directions, even though the drop looks perfectly still to the naked eye. Nothing is stirring it. The motion never stops as long as the fluid has a temperature above absolute zero.

The particle itself is far too big to be a molecule. A typical Brownian particle is around a micrometer across, which is thousands of times wider than a water molecule. What we see is the visible result of an invisible crowd: trillions of fast molecules shoving the particle from every side.

Because each shove comes at a random moment and from a random direction, the particle's path looks like a scribble. It has no preferred direction and no memory of where it was heading a moment ago. Physicists call this kind of path a random walk.

What Causes Brownian Motion?

The cause is molecular motion. Every molecule in a warm fluid moves fast and collides constantly with its neighbors. When a small particle sits among them, molecules strike its surface from all directions, many billions of times per second.

On average the hits from the left balance the hits from the right. But averages only hold over long times. In any short instant, a few more molecules happen to strike one side, or they strike it a little harder, and the particle gets a net nudge. The diagram below sketches one such instant: several pushes of unequal size add up to a small leftover force, and that leftover moves the particle.

A big object, like a ship or even a grain of sand, is struck by so many molecules at once that the imbalances cancel almost perfectly. A tiny particle has a small surface, so the random excess is a noticeable fraction of the total and its motion shows. That is why Brownian motion is a small-scale effect.

A particle pushed by six molecular forces of unequal size; added tip to tail they leave a small net push in one direction
At any instant the molecular pushes on a small particle almost cancel, and the small leftover net push makes it jiggle.

How Does Brownian Motion Happen, Step by Step?

  1. The fluid is warm. Its molecules carry kinetic energy and move in all directions at high speed.
  2. Molecules hit the particle. Collisions arrive from every side, each one transferring a tiny amount of momentum.
  3. The hits do not cancel exactly. At any instant one side receives slightly more momentum than the other.
  4. The particle lurches. The net push gives it a brief velocity in some direction.
  5. Drag slows it again. The fluid's viscosity soaks up that velocity almost at once, and a new random push takes over.
  6. The steps pile up. Millions of tiny lurches in random directions trace a jagged path that slowly spreads the particle away from its starting point.

In fact the true path is jagged at every scale. Zoom in on any short stretch and it looks just as crooked as the whole thing, which is why measuring a single "speed" for a Brownian particle is not meaningful.

How Far Does a Brownian Particle Wander?

A random walk does not carry the particle steadily away. Instead, the average of the squared distance grows in proportion to time. In one direction, Einstein's result reads ⟨x2⟩=2Dt, where D is the diffusion coefficient in square meters per second and t is the time. The typical distance therefore grows only with the square root of time: wait four times longer and the particle has wandered only about twice as far.

For a sphere moving slowly through a liquid, the diffusion coefficient is D=kBT6πηr. Here kB is the Boltzmann constant, T is the absolute temperature, η is the fluid's viscosity and r is the particle radius. A hotter fluid pushes harder, a thicker fluid resists more, and a bigger particle is harder to budge.

The table below uses these formulas for a 1 micrometer sphere in room-temperature water. It drifts a few micrometers in seconds, but crossing a single millimeter by Brownian motion alone takes about two weeks.

How long a 1 µm sphere in water at 20 °C takes to wander a given distance in one direction
Typical distanceTime neededComparison
1 µmabout 1.2 sabout its own diameter
10 µmabout 2 minutesabout the size of a typical human cell
100 µmabout 3.2 hoursthe thickness of a sheet of paper
1 mmabout 13.5 daysa grain of sand
1 cmabout 3.7 yearsa fingernail
Source: Computed with t = x² / (2D), D = k_B T / (6πηr); k_B from NIST CODATA 2022, T = 293.15 K, water viscosity about 1.0 mPa·s (typical) · Retrieved October 2026
Illustration of one large sphere crowded by many tiny spheres, representing a suspended particle surrounded by fluid molecules
A suspended particle is thousands of times larger than the molecules around it, yet their combined random pushes still move it.

What Makes Brownian Motion Faster or Slower?

Three things control how lively the motion looks:

  • Temperature. Warmer molecules move faster and deliver harder pushes, so D rises with absolute temperature. Heat a microscope slide and the jiggling becomes livelier.
  • Particle size. D is inversely proportional to the radius. Halve the size and the particle diffuses twice as fast, which is why the smallest specks seem to dance most wildly.
  • Viscosity. In a syrupy liquid like glycerol the motion is far more sluggish than in water, because the fluid drags harder on every lurch.

Notice what is missing: the motion does not run down. The fluid keeps feeding it energy from heat while drag removes the same amount on average, so a sealed sample at constant temperature jiggles indefinitely. This balance between random kicks and friction is a deep idea in statistical physics.

Diffusion coefficient and typical one-direction spread for spheres of different size in water at 20 °C
Particle diameterD (µm²/s)Spread after 1 s (µm)Spread after 1 min (µm)Spread after 1 h (µm)
0.1 µm4.292.9322.7176
0.5 µm0.8591.3110.278.6
1 µm0.4290.937.1855.6
2 µm0.2150.665.0839.3
5 µm0.0860.413.2124.9
Source: Computed with D = k_B T / (6πηr) and spread = √(2Dt); k_B from NIST CODATA 2022, T = 293.15 K, water viscosity about 1.0 mPa·s (typical) · Retrieved October 2026

Who Discovered Brownian Motion?

The Scottish botanist Robert Brown reported the motion in 1827 while studying tiny particles released from pollen grains in water. He first suspected the particles were alive, then saw the same jittering in powdered rock and glass, which ruled out life as the cause. For decades nobody could explain it.

In 1905 Albert Einstein published a theory that treated the motion as the result of molecular impacts and predicted exactly how far particles should wander. The Polish physicist Marian Smoluchowski reached a similar result independently in 1906. Their formulas linked a visible quantity, the spread of the particles, to the number of molecules in a given amount of matter.

Around 1908 the French physicist Jean Perrin tracked suspended particles under a microscope and found that they followed Einstein's predictions. His measurements gave a value for Avogadro's number and convinced most remaining skeptics that atoms are real. Perrin received the 1926 Nobel Prize in Physics for this line of work.

Where Can You See Brownian Motion?

  • Milk under a microscope. Diluted milk viewed at a few hundred times magnification shows fat droplets trembling in place, the classic classroom demonstration.
  • Smoke in a small glass cell. Bright specks of smoke lit from the side jitter as air molecules strike them.
  • Inside living cells. Small structures and large molecules are jostled constantly, which helps them meet and react even without any pumping.
  • Sensitive instruments. The same molecular kicks make delicate mirrors and balances tremble slightly, setting a noise limit on very precise measurements.
  • Mathematics and finance. The random walk idea behind Brownian motion is used to model noisy processes far from physics, such as fluctuating prices.

Dust drifting in a sunbeam is often called Brownian motion, but most of what you see there is caused by air currents. True Brownian jiggling of dust is too small to notice by eye.

Common Misconceptions

Myth: Brownian particles move because they are alive or swimming.

Physics: Brown himself ruled this out by seeing the same motion in specks of crushed rock and glass. The particles are pushed by the fluid's molecules.

Myth: Dust swirling in a sunbeam is a good example of Brownian motion.

Physics: Most of that swirling comes from air currents. Real Brownian motion of dust is far too small to see without magnification.

Myth: The motion eventually stops once the particle settles down.

Physics: As long as the fluid has a temperature, molecules keep hitting the particle, so the jiggling continues indefinitely.

Key Facts

  • Brownian motion is the random movement of small particles suspended in a liquid or gas.
  • It is caused by uneven collisions with the fluid's molecules, which never cancel exactly at any instant.
  • The average squared distance a particle wanders grows in proportion to time, so the typical distance grows with the square root of time.
  • Higher temperature, lower viscosity and smaller particles all make Brownian motion stronger.
  • Robert Brown described the motion in 1827; Einstein explained it in 1905.
  • Jean Perrin's measurements of Brownian motion around 1908 helped prove that atoms exist.
  • Diffusion is the large-scale result of many particles each doing Brownian motion.
Did you know? A 1 micrometer bead in water has a typical thermal speed of a few millimeters per second (computed), but its direction is scrambled so quickly that over a full second it usually ends up less than one micrometer from where it started.

Quick Quiz: How Well Do You Know Brownian Motion?

5 questions. Tap an answer to check it.

  1. What causes Brownian motion?

  2. If you wait four times longer, how much farther does a Brownian particle typically wander?

  3. Which change makes Brownian motion faster?

  4. Who first described the motion in 1827?

  5. What did Jean Perrin's Brownian motion experiments help confirm?

Frequently Asked Questions

What is Brownian motion in simple terms?

Brownian motion is the shaky, random movement of very small particles floating in water or air. The particles are being bumped all the time by molecules that are far too small to see. The bumps never balance perfectly, so the particle is pushed a little one way, then another, and ends up tracing a messy zigzag path.

What is an example of Brownian motion?

A classic example is diluted milk under a microscope. The tiny fat droplets tremble and drift even though the liquid is not being stirred. Smoke particles in a small lit chamber show the same behavior, and inside living cells many small structures and large molecules are constantly jostled in the same random way.

Why is Brownian motion important?

It was the first visible evidence that matter is made of molecules in constant motion. Einstein's 1905 theory showed how the spread of Brownian particles depends on molecular size and number, and Jean Perrin's experiments confirmed it, settling a long debate about whether atoms are real. Today it also underpins the physics of diffusion and the noise limits of precise instruments.

Does temperature affect Brownian motion?

Yes. The diffusion coefficient is proportional to the absolute temperature, so warmer fluids produce livelier motion. Temperature also lowers the viscosity of most liquids, which adds to the effect. Cooling a sample makes the particles wander more slowly, but the motion only fades completely as the temperature approaches absolute zero.

Why do only small particles show Brownian motion?

Every object in a fluid is struck by molecules, but a large object receives so many hits at once that the random excesses cancel almost completely. A tiny particle has a small surface, so the imbalance from moment to moment is a meaningful share of the total push. Particles larger than roughly ten micrometers barely show the effect.

Is Brownian motion the same as diffusion?

They are two views of one process. Brownian motion describes the random path of an individual particle. Diffusion describes what happens when huge numbers of particles each follow such paths: they spread out from regions of high concentration to regions of low concentration, smoothly and predictably, without any stirring.

Who explained Brownian motion?

Albert Einstein published the explanation in 1905, showing that random molecular collisions produce a spread that grows with the square root of time. Marian Smoluchowski reached a similar result independently in 1906. Jean Perrin then tested the predictions experimentally around 1908 and used them to measure Avogadro's number.

Can Brownian motion happen in gases?

Yes. Small particles in air, such as smoke or fine aerosol droplets, are kicked by gas molecules just as particles in water are kicked by water molecules. Because air is far less viscous than water, a particle of the same size wanders faster in air, although gravity and air currents often hide the effect.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.