
At a Glance
A standing wave forms when a wave and its reflection overlap, creating fixed nodes with zero motion and antinodes with maximum motion. On a string fixed at both ends only certain frequencies fit: f_n = (n / 2L) sqrt(F_T / μ), where n = 1, 2, 3, ..., L is the length, F_T the tension and μ the mass per meter.
- Formed by
- Two identical waves moving in opposite directions
- Key features
- Nodes (no motion) and antinodes (largest motion)
- Node spacing
- Half a wavelength, λ/2
- String formula
- fn = (n / 2L) √(FT / μ)
- Allowed wavelengths (string)
- λn = 2L / n
- SI unit of frequency
- hertz (Hz)
On this page
- What Is a Standing Wave?
- Standing Waves Explained Simply
- What Are Nodes and Antinodes?
- What Is the Formula for Standing Waves on a String?
- What Are Harmonics in Standing Waves?
- How Do Standing Waves Form in Pipes?
- Where Do You See Standing Waves in Real Life?
- How Are Standing Waves Related to Resonance?
- Going Deeper: Why Does the Sum of Two Waves Stand Still?
- Practice Standing Wave Problems
- Common Misconceptions
- Key Facts
- Quiz
- FAQ
What Is a Standing Wave?
A standing wave is a wave pattern whose shape does not travel along the medium. Instead, the medium vibrates in segments, each segment rising and falling while the boundaries between them stay still. It looks as if the wave is frozen in position, flickering up and down in place.
The pattern is built from two ordinary traveling waves. One moves to the right, the other to the left, and both have the same frequency and amplitude. Where they meet they add together through superposition, and the sum happens to be a wave that stands still.
In practice the second wave is almost always a reflection. A wave sent down a rope bounces off the fixed end and runs back over itself, and if the frequency is just right, the outgoing and returning waves lock into a steady pattern.
Standing Waves Explained Simply
Tie one end of a jump rope to a fence and shake the other end up and down. At most shaking speeds the rope just wobbles messily. But at certain speeds it suddenly settles into one big loop, or two loops, or three, with spots between them that hardly move at all.
Those still spots are nodes, and the middles of the loops are antinodes. The rope only forms neat loops when a whole number of half-waves fits exactly between your hand and the fence. Shake at any other rate and the reflected wave does not line up with the new one, so the pattern falls apart.
What Are Nodes and Antinodes?
A node is a point where the two opposite waves always cancel, so the medium there stays at rest. An antinode is a point where they always reinforce, so the medium swings back and forth with twice the amplitude of either wave alone. Nodes and antinodes alternate, and the distance from one node to the next is always half a wavelength.
That spacing gives an easy way to measure a wavelength: find two neighboring nodes and double the gap. A fixed end, such as the bridge of a guitar, must be a node because the string cannot move there. A free end, such as the open mouth of a flute, behaves like an antinode for the air inside.
Nodes do not mean that no energy is present. Energy keeps sloshing between the moving and stretched parts of each segment, but it does not flow along the medium the way it does in a traveling wave.

What Is the Formula for Standing Waves on a String?
For a string held fixed at both ends, both ends must be nodes. That only works if the length holds a whole number of half-wavelengths, so the allowed wavelengths are
The lowest one, with
For a string fixed at both ends, this formula gives every frequency that can form a standing wave; the block lists each variable with its SI unit and the rearranged forms.
| Symbol | Quantity | SI unit |
|---|---|---|
| frequency of the nth harmonic | hertz (Hz) | |
| harmonic number | dimensionless (1) | |
| length of the string between fixed ends | meter (m) | |
| string tension | newton (N) | |
| linear mass density | kilogram per meter (kg/m) |
Rearranged to find another variable:
Valid for: string fixed at both ends; λ_n = 2L/n.
Example 1 The lowest note of a nylon string
A nylon string is stretched between two fixed points 0.65 m apart with a tension of 72 N. Its linear mass density is 0.0006 kg/m. What is the frequency of its fundamental (n = 1)?
- Given:
- harmonic number:
- length of the string between fixed ends:
- string tension:
- linear mass density:
- harmonic number:
- Formula:
- Substitute:
- Answer:
That is close to middle C; tightening the string raises the note, which is exactly what turning a tuning peg does.
What Are Harmonics in Standing Waves?
Each allowed standing-wave pattern is called a harmonic or normal mode. The first harmonic has one loop, the second has two, the third has three, and so on. Harmonic number
A real plucked string vibrates in many harmonics at once. The fundamental sets the pitch you hear, while the mix of higher harmonics gives the instrument its tone color, which is why a violin and a flute playing the same note still sound different. The table below shows the first five modes of the string from the first worked example.
| Harmonic n | Wavelength λ = 2L/n (m) | Frequency (Hz) | Nodes | Antinodes |
|---|---|---|---|---|
| 1 (fundamental) | 1.300 | 266.5 | 2 | 1 |
| 2 | 0.650 | 532.9 | 3 | 2 |
| 3 | 0.433 | 799.4 | 4 | 3 |
| 4 | 0.325 | 1,065.9 | 5 | 4 |
| 5 | 0.260 | 1,332.3 | 6 | 5 |
| Source: Computed with f_n = (n / 2L) √(F_T / μ); string values are illustrative · Retrieved October 2026 | ||||

How Do Standing Waves Form in Pipes?
Wind instruments trap a standing sound wave in a column of air. The rules flip compared with a string: an open end lets air move freely, so it is a displacement antinode, while a closed end stops the air, so it is a node. Sound reflects from both kinds of end, which is what sets up the pattern.
A pipe open at both ends has antinodes at each end and supports every harmonic:
These frequencies depend on the speed of sound, so a warm flute plays slightly sharper than a cold one. For more on air columns, see resonance in air columns.
Example 2 A pipe open at both ends
A plastic tube 0.50 m long is open at both ends. Sound travels at 343 m/s in the room. What is the frequency of its second harmonic (n = 2)?
- Given:
- harmonic number (positive integer):
- speed of sound:
- length of the pipe:
- harmonic number (positive integer):
- Formula:
- Substitute:
- Answer:
Example 3 A test tube closed at one end
Blowing across a bottle-like tube 0.30 m deep, which is closed at the bottom, can excite its third harmonic (n = 3). With sound at 343 m/s, what frequency is that?
- Given:
- harmonic number (odd integer):
- speed of sound:
- length of the pipe:
- harmonic number (odd integer):
- Formula:
- Substitute:
- Answer:
A closed pipe skips the even harmonics, so after n = 1 the next possible note is n = 3.
| Harmonic n | Open at both ends (Hz) | Closed at one end (Hz) |
|---|---|---|
| 1 | 285.8 | 142.9 |
| 2 | 571.7 | not allowed |
| 3 | 857.5 | 428.8 |
| 4 | 1,143.3 | not allowed |
| 5 | 1,429.2 | 714.6 |
| Source: Computed with f_n = nv/2L (open) and f_n = nv/4L, odd n (closed); end corrections neglected · Retrieved October 2026 | ||

Where Do You See Standing Waves in Real Life?
- String instruments: guitars, violins and pianos produce notes from standing waves on stretched strings, and pressing a fret shortens the vibrating length to raise the pitch.
- Wind instruments: flutes, clarinets and organ pipes hold standing sound waves in air columns; covering holes changes the effective length.
- Microwave ovens: microwaves reflect off the metal walls and form a 3D standing pattern, which is why food has hot and cold spots and why most ovens use a turntable. Our microwave chocolate experiment turns those hot spots into a measurement.
- Bathtubs and harbors: water sloshing back and forth in a tub or an enclosed bay can settle into a standing wave called a seiche.
- Rooms and speakers: low bass notes form standing waves between walls, so some seats in a small room sound boomy and others thin.
- Atoms: in quantum physics, electrons in atoms behave like standing waves of probability, a key idea behind the wave function.
How Are Standing Waves Related to Resonance?
Each harmonic frequency is a natural frequency of the string or air column. If you drive the system at one of those frequencies, every new push arrives in step with the reflected wave and the amplitude builds up. That buildup is resonance, and the standing wave is what resonance looks like in a medium with two ends.
Drive the system at a frequency between harmonics and the reflections arrive out of step, so the motion stays small. This selectivity is why a wine glass rings at one clear pitch, and why a singer can, in rare cases, shatter one by holding exactly that note loudly. You can see the effect for yourself with our standing waves on a string experiment.
Going Deeper: Why Does the Sum of Two Waves Stand Still?
Write the two traveling waves as
The factor
Practice Standing Wave Problems
To practice finding harmonics, node spacing and pipe lengths, try our waves worksheets and the sound waves worksheets, which include answer keys. Our wave speed calculator converts between speed, frequency and wavelength, and the wave formulas sheet collects the string and pipe equations on one page. To see how standing and traveling waves differ in shape, compare them with transverse waves that move freely.
Common Misconceptions
Myth: In a standing wave nothing is moving, so there is no wave at all.
Physics: Every point except the nodes is vibrating, often strongly. Only the overall pattern stays in place; the medium itself is very much in motion.
Myth: Any frequency can make a standing wave on a guitar string.
Physics: Only frequencies that fit a whole number of half-wavelengths between the fixed ends can stand. Other frequencies die out quickly.
Myth: Nodes are spaced one full wavelength apart.
Physics: Neighboring nodes are half a wavelength apart. One full wavelength spans three nodes, or two loops of the pattern.
Myth: Open and closed pipes of the same length play the same note.
Physics: A pipe closed at one end has a fundamental half the frequency of an open pipe of equal length, and it lacks the even harmonics.
Key Facts
- A standing wave forms when two identical waves travel in opposite directions and overlap.
- Nodes never move; antinodes swing with the largest amplitude.
- Neighboring nodes are always half a wavelength apart.
- A string fixed at both ends allows wavelengths of 2L/n, with n = 1, 2, 3 and so on.
- A pipe closed at one end supports only odd harmonics.
- Each harmonic is a natural frequency, so standing waves and resonance go together.
- Standing waves do not carry energy along the medium the way traveling waves do.
Quick Quiz: How Well Do You Know Standing Waves?
6 questions. Tap an answer to check it.
What is the distance between two neighboring nodes of a standing wave?
Nodes repeat every half wavelength, with an antinode midway between each pair.
A string fixed at both ends vibrates in its second harmonic. How many antinodes does it have?
Harmonic n on a string fixed at both ends has n antinodes, so the second harmonic has two loops.
What happens to the fundamental frequency of a string if the tension is increased?
Frequency grows with the square root of tension, so tightening a string raises its pitch.
Which harmonics can a pipe closed at one end produce?
A node at the closed end and an antinode at the open end allow only odd multiples of the fundamental.
Which two waves combine to form a standing wave?
Equal frequency and amplitude waves traveling in opposite directions add up to a pattern that stays in place.
On a 1.2 m string fixed at both ends, what is the wavelength of the first harmonic?
The fundamental fits half a wavelength on the string, so λ = 2L = 2.4 m.
Frequently Asked Questions
What is a standing wave in simple terms?
A standing wave is a wave that seems to stay in one place instead of moving along. It forms when a wave bounces back and overlaps with itself. Some points stay perfectly still, called nodes, and the points between them vibrate strongly, called antinodes. A vibrating guitar string is the most familiar example: it moves up and down but the pattern does not travel.
How is a standing wave formed?
A standing wave is formed by two waves of the same frequency and amplitude moving in opposite directions through the same medium. Usually one is a wave and the other is its reflection from a boundary, such as the fixed end of a string. At certain frequencies the two waves line up so that their sum forms a steady pattern of nodes and antinodes.
What is the difference between a node and an antinode?
A node is a point in a standing wave where the medium does not move at all, because the two overlapping waves always cancel there. An antinode is a point of maximum movement, where the waves always add up. Nodes and antinodes alternate along the medium, and each node sits a quarter wavelength away from the nearest antinode.
How many nodes are in the third harmonic?
On a string fixed at both ends, the third harmonic has four nodes and three antinodes. The two ends are nodes, and two more sit evenly spaced between them, dividing the string into three loops. In general, harmonic number n on such a string has n + 1 nodes and n antinodes.
What is the difference between a standing wave and a traveling wave?
A traveling wave moves along the medium, carrying energy from one place to another, and every point reaches its peak at a different time. A standing wave stays in place, does not carry energy along, and has fixed nodes where the medium never moves. Between neighboring nodes, all points of a standing wave reach their peaks at the same moment.
Why do standing waves only form at certain frequencies?
The boundaries decide. If a string is fixed at both ends, both ends must be nodes, so the length must hold a whole number of half-wavelengths. Only wavelengths of 2L, 2L/2, 2L/3 and so on fit, and each one corresponds to one frequency. At any other frequency the reflected wave arrives out of step and the pattern breaks up.
Do standing waves carry energy?
A standing wave stores energy but does not transport it along the medium. The energy shifts back and forth inside each loop, between motion near the antinodes and stretching near the nodes. In a real instrument some energy does leak out as sound, which is why a plucked string slowly fades and why a player must keep bowing or blowing.
Are all harmonics present in a closed pipe?
No. A pipe closed at one end must have a node at the closed end and an antinode at the open end, so only odd numbers of quarter-wavelengths fit. That leaves the 1st, 3rd, 5th and other odd harmonics. Pipes open at both ends, and strings fixed at both ends, support every whole-number harmonic.
What is the fundamental frequency of a standing wave?
The fundamental frequency is the lowest frequency at which a standing wave can form, also called the first harmonic. On a string fixed at both ends it equals the wave speed divided by twice the length. It usually sets the pitch you hear, while higher harmonics add tone color.
Sources
Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.








