Optical instruments

How Microscopes Work

A microscope is an instrument that makes very small, nearby objects look much larger by bending light through lenses. In a compound light microscope, an objective lens forms an enlarged real image of the specimen, and an eyepiece lens magnifies that image again. Total magnification is the product of the two, and the wavelength of light sets the finest detail it can show.

Compound light microscope on a lab bench with its lamp lighting a glass slide beneath the objective lenses
A compound microscope stacks two lens stages, the objective and the eyepiece, to magnify tiny specimens.

At a Glance

A compound microscope works in two stages: the objective lens makes a real, inverted, enlarged image of the specimen, and the eyepiece acts as a magnifying glass on that image. Total magnification equals objective magnification times eyepiece magnification, for example 40 × 10 = 400. Magnification of each lens follows m = -d_i/d_o.

What it does
Magnifies small, close objects using lenses and visible light
Main lenses
Objective (near the specimen) and eyepiece (near the eye)
Formula
m = hi/ho = -di/do; total M = mobj × Meye
Typical magnification
About 40× to 1,000× for a school or lab light microscope
Limit
Detail finer than roughly half the wavelength of light cannot be resolved
On this page
  1. What Is a Microscope and What Does It Do?
  2. How Does a Compound Microscope Work, Step by Step?
  3. What Does the Objective Lens Do?
  4. What Does the Eyepiece Do?
  5. How Do You Calculate Microscope Magnification?
  6. Why Can't a Light Microscope Magnify Forever?
  7. What Are the Main Types of Microscopes?
  8. What Are Microscopes Used For?
  9. Who Invented the Microscope?
  10. Key Facts
  11. Quiz
  12. FAQ

What Is a Microscope and What Does It Do?

A microscope is a tool for seeing things too small for the unaided eye, such as cells, pollen grains, fibers in paper or the crystals in a grain of salt. It works by making the image of the object on your retina much larger than it would be otherwise. A larger image covers more light-sensing cells, so finer detail becomes visible.

The everyday school instrument is the compound light microscope, which uses visible light and at least two lenses. It is called compound because two lens systems work in series. A single lens can magnify too, as a magnifying glass does, but one lens alone struggles to go far beyond about 10× to 20× without blurring.

Microscopes belong to the family of optical instruments, along with cameras and telescopes. A telescope makes distant objects look closer; a microscope makes close, tiny objects look bigger.

How Does a Compound Microscope Work, Step by Step?

  1. Light source. A lamp under the stage sends light upward. A condenser lens gathers it into a bright, even cone aimed at the specimen.
  2. Specimen. Light passes through a thin slice of material on a glass slide. Different parts absorb or bend the light differently, which creates contrast.
  3. Objective lens. A short-focal-length converging lens sits just above the slide. The specimen is placed slightly beyond its focal point, so the lens forms a real, inverted and much larger image inside the tube.
  4. Eyepiece. The eyepiece lens sits so that this first image falls just inside its focal point. Acting as a magnifier, it produces a large virtual image that your relaxed eye can view.
  5. Focusing. Coarse and fine focus knobs move the stage up or down by tiny amounts until the image is sharp.

The two ray diagrams below show these stages. The first image is real and could be caught on a screen; the final image is virtual and is seen only by looking through the eyepiece.

What Does the Objective Lens Do?

The objective is the workhorse of the microscope. Because the slide sits just beyond its focal point, the image forms far up the tube and is many times larger than the specimen. Moving the object closer to the focal point pushes the image farther away and makes it bigger, which is why objectives have very short focal lengths of only a few millimeters.

Most microscopes carry three or four objectives on a rotating nosepiece, commonly 4×, 10×, 40× and 100×. Higher-power objectives sit closer to the slide and collect light over a wider cone of angles, which improves the detail they can resolve. The diagram shows a simplified objective forming a real, inverted and enlarged image of an object placed between F and 2F.

Ray diagram of a microscope objective, a convex lens forming a real, inverted, enlarged image of a specimen just beyond its focal point
Simplified objective: a specimen between F and 2F gives a real, inverted, larger image farther up the tube.

What Does the Eyepiece Do?

The eyepiece, or ocular, is a magnifying glass for the image made by the objective. When that image lies just inside the eyepiece's focal point, the eyepiece forms an upright, larger virtual image of it. Relative to the specimen, though, the final view is still inverted, because the objective already flipped it.

Eyepieces are marked by their magnifying power, most often 10×. Changing the eyepiece changes the total magnification but does not add new detail, because the objective has already decided what fine structure made it into the image. The second diagram shows a converging lens forming an enlarged virtual image of an object inside its focal length.

Ray diagram of a microscope eyepiece, a convex lens forming an enlarged upright virtual image of an object inside its focal length
The eyepiece works like a magnifying glass: an image inside its focal length becomes a larger virtual image.

How Do You Calculate Microscope Magnification?

Each lens has a magnification m=hi/ho=−di/do, the ratio of image size to object size. For the objective you can find the image distance from the thin lens equation and then divide. For the eyepiece it is more useful to compare angles: its angular magnification is close to Me=N/fe, where N = 0.25 m is the standard near point.

The total magnification multiplies the two: M=mobj×Meye. A 40× objective with a 10× eyepiece gives 400×, and a 100× objective with the same eyepiece gives 1,000×. Here is the magnification formula, followed by two examples you can check with our thin lens equation calculator.

Each lens in a microscope obeys the same magnification rule, comparing image size with object size, or image distance with object distance.

m=hiho=−dido
What each symbol means
SymbolQuantitySI unit
mmagnificationdimensionless (1)
hiimage heightmeter (m)
hoobject heightmeter (m)
diimage distancemeter (m)
doobject distancemeter (m)

Rearranged to find another variable:

hi=mhodi=−mdoho=him

Valid for: m < 0 inverted image, m > 0 upright; |m| > 1 enlarged.

Example 1 Magnification of an objective lens

An objective lens has a focal length of 4.0 mm (0.004 m). A slide sits 4.2 mm (0.0042 m) from it. Using the thin lens equation to find d_i, then m = -d_i/d_o, what is the magnification of the objective?

  1. Given:
    • f: f=0.004 m
    • object distance: do=0.0042 m
  2. Formula: m=−dido=−1do(1f−1do)−1
  3. Substitute: f=0.004 m,do=0.0042 m
  4. Answer: m=−20

The negative sign means the real image is upside down, which is why a slide moved left appears to move right in the eyepiece.

Example 2 Magnifying power of an eyepiece

An eyepiece has a focal length of 0.025 m. Its angular magnification compares the view through it with the view at the standard near point N = 0.25 m, using M_e = N/f_e. What is its magnification?

  1. Given:
    • N: N=0.25 m
    • f_e: fe=0.025 m
  2. Formula: Me=Nfe
  3. Substitute: N=0.25 m,fe=0.025 m
  4. Answer: Me=10

This is the familiar 10× eyepiece found on most school microscopes.

Why Can't a Light Microscope Magnify Forever?

Magnification alone is not the same as seeing detail. Light passing through the small opening of an objective spreads out by diffraction, so each point of the specimen becomes a tiny blur spot. Two points closer together than about the size of that spot merge into one. This smallest separable distance is the resolution.

A useful estimate for the finest resolvable spacing is the wavelength divided by twice the numerical aperture, a number engraved on each objective that measures how wide a cone of light it accepts. With green light near 550 nm, even the best oil-immersion objectives reach only about 200 nm. Beyond roughly 1,000× to 1,500×, extra magnification only makes the blur bigger. The table shows how numerical aperture sets the limit; for the angle form of this idea, see resolution and the Rayleigh criterion.

Numerical aperture and the finest resolvable detail in green light (550 nm)
Typical objectiveNumerical aperture (NA)Resolvable spacing λ/(2NA)Example of what you can see
4× scanning0.10about 2,750 nmWhole insect parts, tissue layout
10× low power0.25about 1,100 nmIndividual plant and animal cells
40× high dry0.65about 423 nmCell nucleus, large bacteria
60× high dry0.95about 289 nmBacterial shapes
100× oil immersion1.25about 220 nmSmall bacteria, chromosome detail
100× oil, high grade1.40about 196 nmNear the practical light limit
Source: Computed with d = λ/(2NA) for λ = 550 nm; objective and NA pairings are typical values · Retrieved October 2026

What Are the Main Types of Microscopes?

  • Simple microscope: a single strong converging lens. Early versions with tiny glass beads reached surprisingly high magnifications.
  • Compound light microscope: objective plus eyepiece, the standard in schools and clinics.
  • Stereo (dissecting) microscope: two separate optical paths give a 3D view at low power, ideal for insects, circuit boards and rocks.
  • Fluorescence microscope: shines one color of light and records the different color that glowing dyes emit, so chosen parts of a cell light up.
  • Electron microscope: uses beams of electrons instead of light. Their wavelength is far shorter, so details thousands of times smaller than in light microscopes can be seen.

What Are Microscopes Used For?

Doctors and lab technicians use microscopes to count blood cells, identify bacteria and examine tissue samples. Biologists watch living cells divide. Geologists study thin slices of rock to identify minerals by how they bend polarized light, and engineers inspect metal surfaces and the tiny features of computer chips.

Forensic scientists compare fibers and hairs, food inspectors check for contamination, and students in almost every school meet their first onion skin cell under a 10× eyepiece. The same physics of lenses also appears in phone camera modules and in cameras, which form a real image on a sensor instead of on your retina.

Circular microscope view of stained plant cells with rectangular walls and visible nuclei, as seen at medium magnification
At a few hundred times magnification, the walls and nuclei of plant cells become clearly visible.

Who Invented the Microscope?

The first compound microscopes appeared in the Netherlands around 1600, among spectacle makers who experimented with combinations of lenses. In 1665 Robert Hooke published detailed drawings of what he saw through his compound microscope, including the small compartments in cork that he called cells.

In the 1670s Antonie van Leeuwenhoek, using tiny single-lens microscopes he ground himself, became the first person to describe bacteria and other single-celled life. In the 1800s Ernst Abbe and others worked out the theory of resolution, which explains why light microscopes top out at a certain level of detail, and in the 1930s the first electron microscopes pushed beyond it. Robert Hooke has his own page with more of his work.

Key Facts

  • A compound microscope uses an objective lens and an eyepiece lens, both converging lenses.
  • The objective forms a real, inverted, enlarged image; the eyepiece magnifies that image into a large virtual image.
  • Total magnification equals objective magnification times eyepiece magnification, so 40× with 10× gives 400×.
  • Each lens obeys m = h_i/h_o = -d_i/d_o, and a negative m means an inverted image.
  • Diffraction limits a light microscope to details of roughly 200 nm, no matter how much it magnifies.
  • Electron microscopes beat that limit because electrons have a much shorter wavelength than visible light.
  • Robert Hooke named cells in 1665, and Antonie van Leeuwenhoek first described bacteria in the 1670s.
Did you know? A drop of immersion oil between the slide and a 100× objective lets the lens collect light rays that would otherwise bend away at the glass-air surface, which is why the highest-power objectives only work with oil.

Quick Quiz: How Well Do You Know How Microscopes Work?

6 questions. Tap an answer to check it.

  1. Which lens forms the first, real image in a compound microscope?

  2. A 40× objective is used with a 10× eyepiece. What is the total magnification?

  3. What limits the finest detail a light microscope can show?

  4. Why does the final image look upside down?

  5. An eyepiece has a focal length of 0.05 m. Using M = 0.25 m / f, what is its magnification?

  6. Which kind of microscope can resolve the smallest details?

Frequently Asked Questions

How does a microscope magnify an object?

A compound microscope magnifies in two steps. The objective lens, placed just beyond its focal point from the specimen, forms a real image many times larger than the object. The eyepiece then acts like a magnifying glass on that image, producing a larger virtual image for your eye. The two magnifications multiply to give the total.

How do you calculate total magnification of a microscope?

Multiply the magnification of the objective by the magnification of the eyepiece. Both numbers are printed on the lenses. A 10× objective with a 10× eyepiece gives 100×, and a 40× objective with the same eyepiece gives 400×. If the microscope has an extra lens in the tube, multiply that factor in as well.

What type of lens is used in a microscope?

Both the objective and the eyepiece are converging, or convex, lenses. In practice each one is built from several glass elements cemented or spaced together, which reduces color fringes and distortion, but the group as a whole acts like a single converging lens with a short focal length.

Why is the image in a microscope upside down?

The objective lens forms a real image, and real images made by a single converging lens are always inverted. The eyepiece magnifies that image without flipping it back. So the final view is upside down and reversed left to right compared with the slide. Move the slide left and it appears to move right.

What is the maximum magnification of a light microscope?

Useful magnification for a light microscope tops out around 1,000× to 1,500×. Higher magnification is possible with stronger eyepieces, but it adds no new detail because diffraction blurs features smaller than roughly 200 nm. Microscopists call anything beyond that empty magnification, since it simply enlarges the blur.

What is the difference between magnification and resolution?

Magnification is how much bigger the image looks than the object. Resolution is the smallest distance between two points that can still be seen as separate. A blurry photo blown up on a big screen has high magnification but poor resolution. Good microscopy needs both, and resolution is limited by the wavelength of light and the objective's numerical aperture.

How is an electron microscope different from a light microscope?

An electron microscope uses a beam of electrons and magnetic lenses instead of light and glass lenses. Electrons have a wavelength far shorter than visible light, so diffraction blurs much less and details down to individual groups of atoms can be resolved. Samples usually need to sit in a vacuum, so living cells cannot be watched the same way.

Why do microscopes use oil immersion?

At very high power, light leaving the slide at steep angles would bend sharply at the glass-to-air boundary and miss the objective. Placing a drop of oil with nearly the same refractive index as glass removes that boundary. The lens can collect a wider cone of light, which raises its numerical aperture and improves resolution.

Sources

Constants come from NIST CODATA 2022 (public domain) and unit definitions from the BIPM SI Brochure (CC BY 4.0). Text, diagrams and illustrations are original work by Physics Tribune.

Physics Tribune Editorial Team
Written by our editors and checked against NIST and BIPM reference data. Every worked example is recomputed in code. Read our editorial policy. Last updated October 2026.